Sharp XL-DAB703B User manual

Quick Start Guide
MODEL
XL-DAB703B
MICRO COMPONENT SYSTEM
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/support
Customers without internet access may telephone
0870 527 4277 during ofce hours (or [phone]
if telephoning from Ireland).
This Quick Start Guide will help you to correctly install and operate your system.
1Accessories
Remote control x 1
(RRMCGA368AWSA )
FM/DAB aerial x 1 “AAA” size battery
(UM/SUM4, R3, HP-16 or similar) x 2
2Remote control battery installation
Use 2 “AAA” size batteries (UM/SUM-4, R3, HP-16 or
similar).
1 Open the battery cover.
2 Insert the batteries according to the terminal
indicated in the battery compartment.
When inserting or removing the batteries, push them
towards the (–) battery terminals.
3 Close the cover.
3System connections
FM/DAB aerial
Right speaker
Red
Installing the
supplied FM/
DAB aerial
Black
To left
speaker
Wall socket
(AC 100 - 240 V ~
50/60 Hz)
15A R MW 1
TINSEA492AWZZ
B
arcodesof
t
http://www.barcodesoft.com
Barcode Symbology: Code 93; Font Facename: Code93
M
Data To Encode: TINSEA492AWZZ
Point Size 8 : *TINSEA492AWZZK7*|
Point Size 10 : *TINSEA492AWZZK7*|
Point Size 12 : *TINSEA492AWZZK7*|
Point Size 14 : *TINSEA492AWZZK7*|
XL-DAB703_QG.indd 1 2015-02-04 18:23:47

4Turn on your system
Press the ON/STANDBY button to turn the power on.
MICRO COMPONENT SYSTEM XL-DAB703B
6Listening on AndroidTM devices
Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button repeatedly (main unit) to select
USB function.
Connect the device (Smartphone/Tablet) to the unit.
Press the play button (on main unit, remote control or device).
Quit the application (apps).
Disconnect the device from the USB terminal.
To disconnect the Android device
Android device playback
Insert the connector to the device.
1
Connect the device to the main unit via USB connector.
2
1
2
1
2
3
4
Connector
Device
(Smartphone/Tablet)
MICRO COMPONENT SYSTEM XL-DAB703B
USB connector
(not supplied)
5
Listening to Bluetooth enabled devices
NFC connection for audio playback
1
2
3
Top view of main unit Check that:
Bluetooth operation buttons
Press the button to play or pause.
Press the button to skip up.
Press and hold tofast forward.
Press the button to skip down.
Press and hold tofast reverse.
Your device (smartphone / tablet) has an NFC function.
NFC function on your device is enabled.
Screen lock function of the device is off.
This unit is not in Eco mode.
Touch your device to N-Mark on the remote control or main unit.
A pop-up window asking whether to proceed with the Bluetooth
connection appears on the device. Select <YES>.
The ‘connected’ message appears when the connection is
complete.
Playback will start automatically. Otherwise, press play (on main
unit, remote control or source device).
Sound will be heard from the speakers of this unit via audio
streaming.
Your device must be within 10 meters from the unit.
MICRO COMPONENT SYSTEM XL-DAB703B
XL-DAB703_QG.indd 2 2015-02-04 18:23:48