Sharp LC-32SH10U User manual

LC-26SH10U
LC-32SH10U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
ENGLISHFRANÇAISESPAÑOL
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING:
The lightning flash with arrow-head
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
1
LC-26SH10U
LC-32SH10U
OPERATION MANUAL
• The illustrations and on-screen displays in this operation
manual are for explanation purposes and may vary
slightly from the actual operations.
• Menu items that are not selectable are grayed out.
• The examples used throughout this manual are based on
the LC-32SH10U model.
IMPORTANT:
To aid reporting in case of loss or theft, please record the
TV’s model and serial numbers in the space provided. The
numbers are located at the rear of the TV.
Model No.:
Serial No.:
LIQUID CRYSTAL TELEVISION
ENGLISH
IMPORTANT INFORMATION
ENGLISH

IMPORTANT INFORMATION
Trademarks
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
CAUTION:
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention toArticle 820-40 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to
the grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal of these materials may be
regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the
Electronic Industries Alliance: www.eia.org
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
CAUTION:
DO NOT PLACETHIS PRODUCT ONAN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE.
THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO
THEPRODUCT. USEONLYWITHACART,STAND,TRIPOD,BRACKET,ORTABLE RECOMMENDED
BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES
RECOMMENDED BYTHE MANUFACTURER. A PRODUCTAND CART COMBINATION SHOULD BE
MOVED WITH CARE. QUICK STOPS, EXCESSIVE FORCE,AND UNEVEN SURFACES MAY CAUSE
THE PRODUCTAND CART COMBINATION TO OVERTURN.
2
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
• WOW, SRS and symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly
handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can
result in electric shock and/or re. In order to prevent potential danger, please observe the following instructions when
installing, operating and cleaning the product. To ensure your safety and prolong the service life of your Liquid Crystal
Television, please read the following precautions carefully before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other sources, refer to the operating
instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer.
3
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years
of trouble-free operation of your product, please read the Important Safety Instructions carefully before
using this product.
IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS
4
• Water and Moisture — Do not use this product near water - for example, near a bath tub,
wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the
like.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the
product on an unstable base can cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on
a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware
recommended by the manufacturer.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause overheating
and/or shorten the life of the product. Do not place the product on a bed, sofa, rug or other
similar surface, since they can block ventilation openings. This product is not designed for
built-in installation; do not place the product in an enclosed place such as a bookcase or rack,
unless proper ventilation is provided or the manufacturer’s instructions are followed.
• Heat — The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 3,147,264 thin film transistors, giving you fine picture
details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that
this does not affect the performance of your product.
Precautions when transporting the TV
• When transporting the TV, never carry it by holding onto the speaker. Be sure to always
carry the TV by two people holding it with two hands — one hand on each side of the
TV.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when
the product is dropped or applied with impact. Be careful not to be injured by broken glass
pieces in case the panel breaks.
• Lightning — For added protection for this television equipment during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the wall outlet
and disconnect the antenna. This will prevent damage to the equipment due to lightning
and power-line surges.
• Power Lines — An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it can fall into such
power lines or circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as contact with them might be
fatal.
• Selecting the location — Select a place with no direct sunlight and good ventilation.

5
• Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding
electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
NEC — NATIONAL ELECTRICAL CODE
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy
items.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Use a soft cloth and gently wipe the surface of the display panel. Using a hard cloth may
scratch the panel surface.
• Use a soft damp cloth to gently wipe the panel when it is really dirty.
(It may scratch the panel surface when wiped strongly.)
• If the panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it,
such materials may damage the panel surface.
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
IMPORTANT SAFETY INSTRUCTIONS

6
Supplied accessories
NOTE
• Always use the AC cord supplied with the TV.
Make sure the following accessories are provided with the product.
Remote control unit (X1)
Page 8 Page 8 Page 7
Page 7
“AA” size battery (X2) AC cord (X1)
Cable Clamp (X1) Operation manual (X1)Stand unit (X1)
Page 6
NOTE
• To detach the stand, perform the steps in reverse order.
Attaching the stand
• Before attaching (or detaching) stand, unplug the AC cord from the AC input terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
QUICK REFERENCE
hex key
LC-26SH10U
LC-32SH10U
LIQUID CRYSTALTELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
DE CRISTAL LÍQUIDO
ENGLISHFRANÇAISESPAÑOL
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
Short screw
Thissidefacestherear.
7290000172SH
This side faces the rear.
1
2
1. Confirm the 8 screws supplied with the TV.
3.
1Insert the stand into the opening on the bottom of the
TV.
2Insert and tighten the 4 long screws into the 4 holes on
the rear of the TV.
2. Attach the two parts of the stand unit to each other using
the 4 short screws and the hex key (supplied with the
product) as shown.
Short screws (X4)
(used in step 2) Long screws (X4) (used in step 3)
hex key
Long screw
Soft cushion
CAUTION
• Attach the stand in the correct direction.
• The “REAR” label should be visible from the back of the TV.
• Incorrect installation of the stand may result in the TV falling over.
• Be sure to follow the instructions.

7
QUICK REFERENCE
STOP! To safely remove the television from the box
It’s best to use 2 people to remove the television for stability.
1. Use the cardboard holders on either side of the television to remove it from the box.
2. Remove the cardboard; however, keep the wrapping on the television to protect it while moving.
3. Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your television in a well ventilated area and make sure not to place it by a heat source
or use near water. The television is designed for AC use only and should be used with
supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe
and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not
use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
1. Attach your antenna to the back of the TV.
(See page 13.)
NOTE
•TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3. Bundle the cords properly with a cable clamp.
4. How to turn on the television for the first time.
A) Press POWER on television.
POWER
POWER indicator
2. Connect the AC plug for the television into the wall
outlet.
B) POWER indicator on the front of the television lights
GREEN.
NOTE
• Speaker cannot be detached from the TV.
• TV angle cannot be adjusted.
AC outlet
• Place the TV close to the AC outlet, and keep the power
plug within reach.

30°30°
8
QUICK REFERENCE
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
1 Open the battery cover.
• Place the batteries with their terminals
corresponding to the (+) and (–)
indications in the battery compartment.
NOTE
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
Remote control
sensor
2Insert two “AA” size batteries
(supplied with the product). 3Close the battery cover.
16’4”(5 m)
IMPORTANT:
The POWER indicator on the television should light GREEN indicating you have power to the television.
If the POWER indicator on the television still does not light up, press POWER on the
remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Please refer to the BASIC ADJUSTMENT SETTINGS SECTION and basic Initial setup functions and USING
EXTERNAL EQUIPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc) in your operation
manual.

9
IMPORTANT INFORMATION...................................1
Trademarks..............................................................2
DEAR SHARP CUSTOMER.....................................3
IMPORTANT SAFETY INSTRUCTIONS..................3
Supplied accessories.............................................. 6
QUICK REFERENCE................................................ 6
Attaching the stand.............................................. 6
Contents...................................................................9
Part names.............................................................10
TV (Front).......................................................... 10
TV (Rear)........................................................... 11
Remote control unit........................................... 12
Preparation.............................................................13
Using the remote control unit ............................13
Cautions regarding remote control unit.........13
Antennas........................................................... 13
Watching TV........................................................... 14
Preparation........................................................14
Turning on the power ........................................14
Turning off the power ........................................14
Initial setup........................................................ 14
Simple button operations for
changing channels ......................................... 16
Simple button operations for
changing volume/sound ................................. 17
Display the channel information........................17
Setting MTS/SAP stereo mode .........................18
Setting WOWTM surround sound........................18
Basic adjustment settings....................................19
Menu operation buttons..................................... 19
Menu items........................................................19
Favorite channel setting....................................20
Labeling channels .............................................20
Picture adjustments...........................................21
Color temperature .............................................21
Cinema mode.................................................... 21
Back lighting...................................................... 21
Sound adjustment .............................................22
Digital audio output............................................ 22
Using external equipment.....................................23
Displaying an external equipment image ..........23
Connecting a DVD player or a digital TV STB
(Air or Cable)...................................................24
Connecting a VCR, game console
or camcorder...................................................24
Using digital audio output..................................24
Connecting HDMI equipment............................25
Displaying an image from HDMI equipment......25
Selecting HDMI audio input source...................25
Useful adjustment settings...................................26
Reset................................................................. 26
Input label..........................................................26
AV mode............................................................ 27
Selecting the digital audio language..................27
View mode for 4:3 programs............................. 28
View mode for HD programs............................. 28
Picture scroll......................................................28
Aspect ...............................................................28
Audio output select............................................29
Sleep timer........................................................ 29
Closed captions and digital closed captions......30
Caption setup.................................................... 31
Password setting for parental control................32
Parental control (V-CHIP).................................. 33
TV Parental Guidelines (TV Guidelines) ...........34
Voluntary movie rating system (MPAA)............. 34
Canadian rating systems...................................35
Canadian English ratings ..................................36
Canadian French ratings...................................36
How to temporarily release
the V-CHIP block.............................................36
Reactivating the temporarily released
V-CHIP block...................................................36
Other viewing options........................................... 37
Freezing images................................................37
Signal meter...................................................... 37
Appendix................................................................38
Removing the stand ..........................................38
Setting the TV on the wall .................................38
Troubleshooting................................................. 39
Troubleshooting-Digital broadcasting................39
Specifications.................................................... 40
Optional accessories......................................... 40
Dimensional drawings ......................................... 41
Contents

10
Part names
POWER button
TV (Front) Channel buttons
(CH / )
Volume buttons (VOL–/+)
INPUT button
POWER indicator*
Remote control sensor
NOTE
*See page 14 for TV status indicator.

11
Part names
TV (Rear)
INPUT4 terminals
ANT in
INPUT1 terminals
INPUT2 terminals
INPUT3 terminals
COAXIAL DIGITAL AUDIO
OUTPUT Terminal
AUDIO OUT Terminals
AC INPUT terminal

1
3
5
4
11
2
16
12
13
14
15
18
17
19
22
20
21
9
10
7
8
6
12
Part names
1POWER: Switch the power on or enters standby mode.
(See page 14.)
20 – 9: Set the channel. (See page 16.)
3•(DOT):(See page 16.)
4SURROUND: Display the WOW surround setting
menu. (See page 18.)
5FREEZE: Set the still image. Press again to return to
normal screen. (See page 37.)
6SLEEP: Set the sleep timer. (See page 29.)
7EXIT: Turn off the menu screen.
8CC: Display captions during closed-caption source.
(See page 30.)
9AUDIO: Display the MTS setting menu. (See page 18.)
10 FAVORITE CH
A, B, C, D: Select four preset favorite channels in four
different categories. (See page 20 for details.)
While watching, you can toggle the selected channels
by pressing A, B, C and D.
11 DISPLAY: Display the channel information.
12 INPUT: Select a TV input source. (TV, INPUT1~4)
(See page 23.)
13 MUTE: Mute the sound. (See page 17.)
14 VOL +/–:Set the volume. (See page 17.)
15 CH /:Select the channel. (See page 16.)
16 ENT: Jumps to a channel after selecting with the 0–9
buttons.
17 FLASHBACK: Return to the previous channel or input
external mode. (See page 16.)
18 MENU: Display the menu screen.
19 ////ENTER: Select a desired item on the
screen.
20 RETURN: Return to the previous menu screen.
21 VIEW MODE: Select the screen size. (See page 28.)
22 AV MODE: Select an adjusted picture setting.
(SPORTS, STANDARD, MOVIE, MEMORY.)
(See page 27.)
Remote control unit
NOTE
• When using the remote control unit, point it at the TV. (See page 8.)

300-ohm twin-lead (flat)
300-ohm twin-lead
75-ohm coaxial cable (round)
75-ohm coaxial cable
Cable TV lead-In
or
IN OUT
300-ohm
twin-lead
VHF
ANTENNA UHF ANTENNA
Combiner
(commercially
available)
or
Home Antenna
terminal (75-ohm)
300/75-ohm adapter
(commercially available)
Coaxial cable
(commercially
available)
13
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor on
the TV. Objects between the remote control unit and the remote control sensor
may prevent proper operation.
Cautions regarding remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place in an area
with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the remote control unit.
• The remote control unit may not work properly if the remote control sensor on the TV is
under direct sunlight or strong lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the remote control sensor.
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an
F-type connector, plug it into the antenna terminal at the rear of the TV set.
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (Commercially available).
2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300/75-ohm adapter
(Commercially available).
F-type connector F-type connector should be finger-tightened only.
When connecting the RF cable to the TV set, do not tighten
F-type connector with tools.
If tools are used, it may cause damage to your TV set.
(The breaking of internal circuit, etc.)
Connecting Antenna Cable
300-ohm twin-lead cable (flat)
F-type connector
75-ohm coaxial cable (round)
75-ohm coaxial cable
Preparation
Cable without a CATV
converter
Combination VHF/UHF
antenna
Separate VHF/UHF
antenna
NOTICE

14
1
Simple operations for watching a TV program
POWER indicator
POWER (On/Standby)
Turning on the power
Press POWER on the TV, or POWER on the remote
control.
• POWER indicator (Green): The TV is on. (“PLEASE
WAIT” will appear for a few seconds on the screen.)
NOTE
• The LANGUAGE setup menu will appear automatically
when MENU is pressed on for the first time. (See below.)
Turning off the power
Press POWER on the TV, or POWER on the remote
control.
• The TV enters standby mode and the image on the
screen disappears.
• The POWER indicator on the TV changes to Red.
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the power
outlet.
• Weak electric power is still consumed even when
POWER is turned off.
• If a station being viewed stops broadcasting, the TV will
automatically shut itself off after 15 minutes.
Preparation
Perform the following steps before you press POWER
on the remote control unit.
1. Insert the batteries into the remote control unit.
(See page 8.)
2. Connect the antenna cable to the TV. (See page
13.)
3. Plug in the AC cord to the AC outlet. (See page 7.)
Watching TV
POWER
TV status indicator (POWER)
ON Lighting (Green)
Lighting (Red)OFF/Standby
Initial setup
Language setting
When you press MENU for the first time, the
LANGUAGE setup menu will appear
automatically.
Select from among 3 languages: English, French and
Spanish.
Press /to select the desired language
from the list.
SETUP
LANGUAGE ENGLISH
ENGLISH/FRANÇAIS/ESPAÑOL
CLOCK SET
AIR/CABLE CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT :ADJUST

15
CLOCK SET
MONTH 1
DAY 1 (SUN)
YEAR 2006
TIME 12:00AM
:SELECT :ADJUST
EXIT:END
SETUP
LANGUAGE ENGLISH
CLOCK SET
AIR/CABLE AIR/CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT :ADJUST
SETUP
LANGUAGE ENGLISH
CLOCK SET
AIR/CABLE CABLE
AUTO CH MEMORY
ADD/DELETE
:SELECT :ADJUST
Clock setting
Please set correct date and time manually.
Press /to select “CLOCK SET”, then
press /. The CLOCK SET menu screen
displays.
Channel search
AUTO CHANNEL MEMORY makes the TV look for
all channels viewable in the set area.
Press /to select “AUTO CH MEMORY”
Antenna setting
Make sure what kind of connection is made with your
TV when selecting “AIR” or “CABLE”.
Press /to select “AIR/CABLE”, then
press /to select “AIR” or “CABLE”.
Watching TV
2
3
4
Press /to set the MONTH, then press
to move to the next.
Set the DAY, YEAR and TIME (hour and
minute) as above step.
After setting the date and time correctly,
press ENTER.
Press /. The TV will begin memorizing
all the channels available in your area.
• Depending on the reception condition, it may
take approximately 10 minutes to complete
memorizing digital cable channels, please be
patient.
AUTO CH MEMORY
EXIT:CANCEL
PROGRAMMING NOW
PLEASE WAIT
Press /to select the channel which you
want to skip.
Press MENU and the MENU screen
displays.
Press /to select “ADD/DELETE”, and
then press /.
Press /to select (SETUP).
Press /to select “ADD/DELETE”, and
then press /. Now, the channel list
becomes selectable.
Skipping stored channel
You can set channel selection disabled using CH /.
1
2
3
4
5
Press /to select “DELETE” for selected
channel.
6
Press EXIT to return to the normal screen.
Now, skipping channel is applied.
7
• To add a digital channel you are watching:
Select a channel you want to add. Then select “ADDING
CHANNEL” in step 4, press /.
• To release the skipping channel:
Select “ADD” in step 6.
• To remove all the channels from channel memory:
Select “CLEAR ALL” after step 3, and the press /.

16
Simple button operations for
changing channels
You can change channels in several ways.
NOTE
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made
if there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 115ENT
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 22• (DOT) 1ENT
NOTE
• When you enter 0–9 only, channel selection will be made
if there is no operation within a few seconds.
• If you push “0” by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0–9 and •(DOT), channel selection will
be made if there is no operation within a few seconds.
Method 1
Using CH / on the remote control unit or on the
TV.
Method 2
1 Press FLASHBACK to switch to the previously
tuned channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
NOTE
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5ENT
Watching TV

17
VOLUME 25
Simple button operations for
changing volume/sound
Changing the volume
You can change the volume on the TV or on the
remote control unit.
NOTE
• VOL+/–on the TV operates the same as VOL+/– on the
remote control unit.
Using VOL +/–
• To increase the volume, press VOL+.
• To decrease the volume, press VOL–.
Using MUTE on the remote control unit
Mutes the current sound output.
NOTE
• Mute can be canceled if you press VOL+/–or MUTE.
Press MUTE.
• “MUTE” will be displayed on the screen, and
the sound is silenced.
Watching TV
1
MUTE
Display the channel information
Press DISPLAY to display the current channel (or
input source) information on the screen.
When the TV receives a digital signal, press once, the
digital information will appear.
• Broadcast program name
• Station name • Remaining time
• Audio language • Program name
• V-CHIP RATING • HD or SD mark
• Closed Caption mark • V-Chip mark
Press DISPLAY again, the analog information will appear.
• Clock
• Channel number or VIDEO mode selected
• Channel label (if preset)
• Stereo or SAP (second audio program) audio status
• Content rating
• View mode
51-3
CITYHD
Moon Star
Remaining Time 0:20 TV-Y7 English
No Program Information is available.
SUN Jan 01 12:00 PM
HD CC
STEREO
SAP
TV-PG L V
SLEEP TIMER 2h00m
TV
ABCD
SIDE BAR CABLE
7
CLOCK 12:00AM SUN
Press DISPLAY again to clear the display.
NOTE
• Analog channel status will display on the screen for
approx. 4 seconds. Digital channel status will display for
approx. 10 seconds.

18
AUDIO
MTS STR/SAP/MONO
BASS 25
TREBLE 25
BALANCE 0
SPEAKERS ON
:SELECT :ADJUST
Setting MTS/SAP stereo mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This
feature is called Multi-channel Television Sound
(MTS). The TV with MTS can receive mono sound,
stereo sound and Secondary Audio Programs (SAP).
The SAP feature allows a TV station to broadcast
other information, which could be audio in another
language or something completely different like
weather information.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
• SAP broadcasts
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to
fixed mono-sound mode.
NOTE
•MTS only operates while in TV mode.
•When the TV receives a stereo or SAP broadcast, the
word “STEREO” or “SAP” displays on-screen every
time you turn the TV on, change the channel, or press
DISPLAY.
Watching TV
Press AUDIO and the (AUDIO) menu
screen displays. “MTS” will be highlighted.
Press EXIT to return to the normal screen.
Press AUDIO again or /to select “STR
(STEREO)”, “SAP” or “MONO”.
1
2
3
Setting WOWTM surround sound
SRS WOW is a special combination of SRS Labs
audio technologies that creates a thrilling surround
sound experience with deep, rich bass from stereo
sound sources. Your TV’s audio will sound fuller,
richer, and wider. SRS WOW consists of three
features; SRS 3D, FOCUS, and TruBass.
Select STEREO mode (see “Setting MTS/
SAP stereo mode” on this page).
Press SURROUND and the (AUDIO)
menu screen displays. "WOW SRS 3D" will
be highlighted.
1
2
Press /to select the desired WOW
feature you want to adjust.
3
AUDIO
WOW SRS 3D ON/OFF
FOCUS OFF
TruBass OFF
HDMI HDMI
:SELECT :ADJUST
SRS 3D: Press /to turn on or off the
surround sound effect.
FOCUS: Press /to turn on or off the vocal
emphasis effect.
TruBass: Press /to select the bass
expansion effect high, low or off.
After your desired setting, press EXIT to
return to the normal screen.
4
NOTE
•You can enter to the same menu screen from
(AUDIO) menu.
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.

19
PICTURE
SETUP
AUDIO
OPTION
LOCKS
:SELECT :ADJUST
ENTER:SET EXIT:END
Menu items
List of menu items to help you with operations
Basic adjustment settings
AV MODE ....................................................Page 27
BRIGHTNESS .............................................Page 21
CONTRAST .................................................Page 21
COLOR ........................................................Page 21
TINT .............................................................Page 21
SHARPNESS ..............................................Page 21
COLOR TEMPERATURE ...........................Page 21
RESET (Picture adjustments) ...................Page 26
LANGUAGE.................................................Page 14
CLOCK SET.................................................Page 15
AIR/CABLE .................................................Page 15
AUTO CH MEMORY ...................................Page 15
ADD/DELETE...............................................Page 15
CLOSED CAPTION .....................................Page 30
CC ADVANCED...........................................Page 31
VIEW MODE ................................................Page 28
PICTURE SCROLL .....................................Page 28
CINEMA MODE ...........................................Page 21
ASPECT.......................................................Page 28
SIGNAL METER ..........................................Page 37
BACK LIGHTING.........................................Page 21
MTS .............................................................Page 18
BASS ...........................................................Page 22
TREBLE.......................................................Page 22
BALANCE ...................................................Page 22
SPEAKERS .................................................Page 29
WOWSRS 3D ...............................................Page 18
FOCUS................................................Page 18
TruBass..............................................Page 18
HDMI ...........................................................Page 25
AUDIO LANGUAGE ...................................Page 27
DIGITAL OUTPUT ......................................Page 22
RESET (Sound adjustments) ....................Page 26
FAVORITE CH.............................................Page 20
CH LABEL ...................................................Page 20
VIDEO LABEL .............................................Page 26
V-CHIP SET .................................................Page 34
NEW PASSWORD.......................................Page 32
Menu operation buttons
Use the following buttons on the remote control to
operate the menu.
MENU: Press to open the menu screen.
///:Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or complete
the setting.
RETURN: Press to return to the previous step.
EXIT: Press to exit from the menu screen.
All changed settings will be saved.
The lower part of the menu screen is an
operational guide for the remote control.
It will change in accordance with each menu
setting screen.