Sharp AQUOS LC-32LE185M User manual

1 2
Printed in Malaysia
TINS-G602WJZZ 1
16P05-MA-NF
LC-32LE185M
LC-40LE185M
LED BACKLIGHT TV
OPERATION MANUAL
Supplied accessories
Remote control unit “AAA” size battery (g2) Operation manual
Stand unit
Stand assembly
Stand base
with letter “R”
Stand base
with letter “L”
Screws (g4)
Contents
Page
Supplied accessories...........................1
Dear SHARP customer.........................2
Important Safety Precautions .............2
Trademarks...........................................3
Attaching the stand ..............................3
Antenna connection .............................4
Connecting external devices...............4
Remote control unit .............................6
Part names ............................................7
Turning the TV on/off ...........................7
Initial auto installation..........................8
Selecting a preset AV mode ................8
Menu operation.....................................8
Page
Programme setup.................................8
Picture menu.........................................9
Audio menu .........................................10
ECO menu ...........................................11
Setup menu.........................................11
Option menu .......................................12
Colour adjustment..............................12
SUPER ECO mode..............................12
Timer....................................................12
USB Media Player...............................13
Appendix .............................................15
Specifications .....................................16
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many
years of trouble-free operation of your product, please read the Important Safety Precautions
carefully before using this product.
Important Safety Precautions
• Stand base must be attached to prevent the TV set from falling down and cause injuries.
• Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a soft damp cloth to clean the
product. Do not use liquid cleaners, aerosol cleaners or chemical cloth to clean it, as such materials may damage the
product.
• Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub,
swimming pool and in a wet basement.
• Do not place vases or any other water-filled containers on this product.
The water may spill onto the product causing fire or electric shock.
• Stand — Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the product to fall,
resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the
manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the cart.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the
product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not designed
for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation
is provided or the manufacturer’s instructions are followed.
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is struck forcefully or with a
sharp object. If the LCD panel is broken, be careful not to be injured by broken glass.
• Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).
• To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC power cord under the TV set or other heavy items.
• Do not place heavy objects on this product or stand on it. Doing so could cause injury if the product overturns. Take
special care near children and pets.
• The LCD panel is a very high technology product with 1,049,088 (only for LC-32LE185M)/2,073,600 (only for LC-40LE185M)
pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of
blue, green or red.
This is within product specifications and does not constitute a fault.
• Precautions when transporting the TV
When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always carry
the TV by two people holding it with two hands — one hand on each side of the TV.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• Install the product on the place where the AC cord can be unplugged easily from the AC outlet or from the AC INPUT
terminal on the rear of the product.
• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,
particularly to children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the supporting furniture.
• Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture
and the television to a suitable support.
• Not standing the televisions on cloth or other materials placed between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to reach the television or its controls.
• Do not install the TV in a location in which it will be subject to water drops such as underneath an air conditioning unit or in
the vicinity of a humidifier.
• Water drops falling onto the TV and water entering inside it may result in fire, electric shock, or malfunctions.
• We recommend that you install the TV at least 1 m away from the outlet of an air conditioner.
LC-32_40LE185M_G602_EN.indd 1LC-32_40LE185M_G602_EN.indd 1 5/9/2016 2:38:12 PM5/9/2016 2:38:12 PM

3 4
Trademarks
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and other countries.
• LC_LCFONT+and LC logo mark are registered trademarks of SHARP Corporation. This product
is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-to-read
characters on an LCD screen. However, other non-LCD fonts are used for displaying some screen pages.
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work, spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1Confirm the screws supplied with the TV.
Screws (4)
2Insert the stand assembly into the openings on the bottom of the TV. (1)
3Insert and tighten the screws into the holes on the rear of the TV. (2)
1
2
SERVICEONLY
USB
Soft cushion
Stand base with letter “L”
Stand base with letter “R”
NOTE
• To detach the stand, perform the steps in reverse order.
• Do not attach or detach the stand without holding it. Doing so can cause the stand to fall, resulting in serious personal
injuries as well as damage to the stand.
• The illustrations used throughout this manual are based on LC-32LE185M.
Antenna connection
Connect antenna cable to the antenna terminal
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC
169-2), plug it into the antenna jack at the rear of
the set.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from
INPUT on the remote control unit or INPUT on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected
using the INPUT 2 terminal.
When using composite cable (commercially available)
SERVICEONLY
F275WJ
USB
VCR/Game console/
Camcorder
• The illustrations used throughout this manual are based on LC-32LE185M.
LC-32_40LE185M_G602_EN.indd 2LC-32_40LE185M_G602_EN.indd 2 4/21/2016 1:51:08 PM4/21/2016 1:51:08 PM

5 6
Remote control unit
TIMER
PHOTO
COLOUR
ADJ.
TV
GB217WJSA
RGY B
1
2
5
7
8
9
10
6
3
4
11
12
13
14
16
15
17
18
7 VOLk/VOLl
Set the volume.
(VOLk) Increase the volume.
(VOLl) Decrease the volume.
8 e(Mute)
Press
esMutes sound.
Press
eagain sRestores sound.
Mute will be cancelled after 30 minutes. However, the TV
will not suddenly output loud sound as the volume level will
be set to 0 automatically. Increase the volume level by
pressing VOL k.
9 a/b/c/d(Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
10 COLOUR ADJ.
Adjust the colour tone of the image on screen. (See page 12.)
11 SUPER ECO
Reduce overall power consumption based on user
preferences. (See page 12.)
12 PHOTO
Display your pictures directly on the TV screen. (See page 13.)
13 INPUT (INPUT SOURCE)
Select an input source.
14 CHr/CHs
TV input mode: Select the channel.
(CHr) Increase the channel number.
(CHs) Decrease the channel number.
15 MPX
Select the sound multiplex mode.
16 MENU
Display the menu screen.
17 RETURN
MENU mode: Return to the previous menu screen.
18 Colour (Red/Green/Yellow/Blue)
The coloured buttons are correspondingly used to select the
coloured items on the screen.
1 POWER (STANDBY/ON)
To switch the power on and off. (See page 7.)
2 DISPLAY
Display the channel or input information.
3 TIMER
Set the Sleep timer and Reminder. (See page 12.)
4 0 – 9
Set the channel.
5 A(Flashback)
Press
Ato return to the previous selected channel
or external input mode.
6 AV MODE
Select an audio and video setting. (See page 8.)
Inserting the batteries
Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
1Open the battery cover. 2Insert the two supplied “AAA” size
batteries.
3Close the battery cover.
• Place batteries with their terminals corresponding to
the (e) and (f) indications in the battery compartment.
CAUTION
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Connecting external devices (Continued)
Connecting a DVD player/Digital TV STB (Set Top Box)
You can use the INPUT 1 (HDMI) or INPUT 2 terminals when connecting to a DVD player/Digital TV STB (Set
Top Box) and other audiovisual equipment.
When using HDMI-certified cable (commercially available)
SERVICEONLY
F275WJ
USB
DVD player/Digital TV
STB (Set Top Box)
Connecting a PC
You can use the INPUT 1 (HDMI) terminal when connecting to a PC.
SERVICEONLY
F275WJ
USB
PC
Connecting a USB device
Connect a USB device to the TV.
SERVICEONL
Y
F275WJ
USB
USB
CAUTION
• Do not disconnect a USB device from the TV while transferring files, when a screen is in “USB” mode.
• The illustrations used throughout this manual are based on LC-32LE185M.
LC-32_40LE185M_G602_EN.indd 3LC-32_40LE185M_G602_EN.indd 3 4/21/2016 1:51:09 PM4/21/2016 1:51:09 PM

7 8
Part names
TV (Front)
POWER indicator
Light off Power off.
Lighted (Red) The TV is in standby mode.
Lighted (Green) The TV is on.
Remote control sensor
TV (Rear)
SERVICEONLY
F275WJ
USB
USB
SERVICE ONLY
1
2
5
3
4
6
7
8
1 USB terminal*
2 INPUT 1 (HDMI) terminal
3 Antenna input terminal
4 INPUT 2 terminals
5 SERVICE ONLY terminal**
6 /AUDIO output (L/R) terminal
7 POWER (On/Off) button
8 Keypad Control
JOG-KEY BASIC
FUNCTION
FUNCTION
DURING
MENU
rCH UP r*
sCH DOWN s*
+VOL UP +*
–VOL DOWN –*
b
(BELOW 1 SEC) INPUT SELECT/ENTER
b(1 SEC AND
OVER) MENU RETURN/MENU
EXIT
* Repeat keys
* USB terminal use for USB media player. (See page 13.)
** Usually do not connect anything to this terminal as it reserved only for service personnel.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The illustrations used throughout this manual are based on LC-32LE185M.
Turning the TV on/off
Turning on/off the power
• To turn on the power
Press POWER on the TV or remote control. (After a few seconds, an image appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV or remote control.
NOTE
• If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
Initial auto installation
When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
1Press POWER on the TV.
• The initial auto installation wizard appears.
2Press a/bto select the desired language,
and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
Selecting a preset AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
1Press AV MODE.
2Each time you press AV MODE, the mode
changes.
• You can also switch the mode in the “AV mode”
menu on the “Picture” and “Audio” menu screen.
Selected item Description
Standard For a highly defined image in a normally
bright room.
Movie For a movie.
Dynamic For a clear-cut image emphasising high
contrast for sports viewing.
Dynamic
(fixed)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
Super ECO Reduce the backlight brightness.
PC For PC. (Available only when receiving a
PC signal via INPUT 1 (HDMI) terminal.)
NOTE
• You can select a different AV mode item for each input
mode. (For example, select Standard for TV input and
Dynamic for VIDEO input.)
Menu operation
1Press MENU and the MENU screen displays.
2Press c/dto select the desired menu.
(Programme setup, Picture, Audio, ECO, Setup,
Option)
3Press a/bto select the desired menu item.
Press ENTER to proceed if necessary.
4Press a/bor c/dto select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Programme setup
Programme setup
Auto installation
Auto search
Manual adjust
Programme edit
HAuto installation
You can run auto installation again, even after setting
up the preset channels.
1Press MENU and the MENU screen displays.
2Press c/dto select “ ” (Programme setup).
3Press a/bto select “Auto installation”, and
then press ENTER.
If you have already set the password, enter it
here.
• See page 11 for setting a password.
4Press a/bto select the desired language
listed on the screen, and then press ENTER.
You do not need to do anything during the auto
search. Press MENU to exit.
TV channel settings
You can reconfigure the TV channel settings
automatically or manually using Auto search,
Manual adjust or Programme edit.
HAuto search
Use this menu to add new services automatically
after “Auto installation” has been completed.
Auto search will memorise channels available at that
time.
1Repeat steps 1 and 2 in Auto installation.
2Press a/bto select “Auto search”, and then
press ENTER.
If you have already set the password, enter it
here.
• See page 11 for setting a password.
You do not need to do anything during the auto
search. Press MENU to exit.
LC-32_40LE185M_G602_EN.indd 4LC-32_40LE185M_G602_EN.indd 4 4/21/2016 1:51:10 PM4/21/2016 1:51:10 PM

9 10
Programme setup (Continued)
HManual adjust
You can set some channel items manually.
1Repeat steps 1 and 2 in Auto installation.
2Press a/bto select “Manual adjust”, and then
press ENTER.
If you have already set the password, enter it
here.
• See page 11 for setting a password.
3Press a/b
to select your desired item, and
then press
c/d to adjust the settings.
CH (Channel)
Display channel that you selected.
Colour system
Select the optimum colour system to receive. (Auto,
PAL, SECAM, NTSC 4.43, NTSC 3.58)
Sound system (Broadcasting system)
Select the optimum sound system (Broadcasting
system) to receive. (BG, I, DK, M)
Search
The next channel will be searched in order.
Fine-tune
You can adjust the frequency to your desired position.
NOTE
• Adjust while checking the background picture as a
reference.
• Instead of pressing c/dto adjust the frequency, you
can set by directly entering the frequency number of the
channel with 0 — 9.
a
• 179.25 MHz: Press 1 s7 s9 s2 s5.
• 49.25 MHz: Press 4 s9 s2 s5 sENTER.
HProgramme edit
Use this menu to set up a channel individually.
1Repeat steps 1 and 2 in Auto installation.
2Press a/bto select “Programme edit”, and
then press ENTER.
3Press a/b
to select the channel you want to
edit.
4Press ENTER again to edit below items.
CH (Channel)
Display channel number.
Label
To enter the name of the channel. Maximum 7
alphanumeric can be input.
• Press a/b: To select a desired alphanumeric.
• Press c/d: To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.
Skip
Channels with “Skip” set to “X” are passed over
when using CHr/seven if selected while
watching the image from the TV.
Sort
Channel position can be sorted freely.
Picture menu
Picture
AV mode
Picture adjust
Advanced
Wide mode
Reset
HPicture adjust
Adjusts the picture to your preference with the
following picture settings.
Selected item c button d button
Backlight The screen dims The screen
brightens
Contrast For less contrast For more contrast
Brightness For less brightness For more
brightness
Colour For less colour
intensity
For more colour
intensity
Tint Skin tones become
reddish
Skin tones
become greenish
Sharpness For less sharpness For more
sharpness
NOTE
• “Picture adjust” cannot be changed during “Dynamic
(fixed)” mode.
Picture menu (Continued)
HAdvanced
This TV provides advanced function for optimising the
picture quality.
DNR (Digital Noise Reduction)
Reduces noise on screen and produces a clearer
video image. (Off, Low, Middle, High)
HWide mode
You can manually select the size of a picture
appeared on your screen.
Selectable picture size varies with the type of signal
received.
Press a/bwhile the wide mode menu displays on
the screen.
• As you toggle down the options, each mode is immediately
reflected on the TV.
Selected item Description
Full For 16:9 squeeze pictures.
4:3/Normal For 4:3 “standard” pictures. A side bar
appears on each side.
Panorama In this mode the picture is progressively
stretched toward each side of the screen.
Dot by Dot Display an image with the same number
of pixels on the screen (only when
receiving PC format signal).
Underscan Display with an Underscan image only
when receiving a 720p/1080p/1080i
signal (only for LC-32LE185M)/a 720p
signal (only for LC-40LE185M). Display
with the High-Definition image adjusted
optimally. Noise may appear on the edge
of the screen with some programmes.
NOTE
• Some picture sizes may not be displayable depending on
the input signal.
• “Normal” can be selected only during USB Media Player.
• For resetting all “Picture menu” items to factory preset
values, press a/bto select “Reset”, press ENTER, press
a/bto select “Yes”, and then press ENTER.
Audio menu
4
4
Audio
AV mode
MPX
Billingual
Sound adjust
Surround
Bass enhancer
Reset
HMPX
Selected item Description
Auto The TV automatically select the best
sound.
MONO Only MONO sound.
HBillingual
Select the preference audio language (DUAL I,
DUAL II, DUAL I+ II)
HSound adjust
Selected item c button d button
Bass For weaker bass For stronger bass
Treble For weaker treble For stronger treble
Balance Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
HSurround
When you set to “On”, you can enjoy surround
sound, the same as if you were in a movie theatre.
(On, Off)
HBass enhancer powered by SRS Labs, Inc.
This function allows you to enjoy bass-enhanced
sound.
Selected item Description
On Bass enhancer function is on.
Off Outputs the normal sound.
NOTE
• Billingual only can be select when MPX set to “Auto”.
• For resetting all “Audio menu” items to the factory preset
values, press a/bto select “Reset”, press ENTER, press
a/bto select “Yes”, and then press ENTER.
LC-32_40LE185M_G602_EN.indd 5LC-32_40LE185M_G602_EN.indd 5 4/21/2016 1:51:10 PM4/21/2016 1:51:10 PM

11 12
ECO menu
ECO
No operation off
No signal off
HNo operation off
You can set the TV to automatically power off when
no TV operation is performed for more than 3 hours.
(30 min., 3 hours, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
HNo signal off
You can set the TV to automatically power off in
about 15 minutes after the TV goes into a state of
receiving no programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
Setup menu
4
4
Setup
Child Lock
Input setting
HDMI auto view
Language
Identification
Software license
Reset
HChild lock (TV input mode only)
Allows you to use a password to protect certain
settings from being accidentally changed.
Lock system
Allow you to lock the whole TV system. (On, Off)
Setting a password
1Repeat steps 1 and 2 in Menu operation.
2Press a/bto select “Child lock”, and then
press ENTER.
3If you already set the password, enter it here.
4Press a/bto select “Set password”, and then
press ENTER.
5Enter the 4-digit number as a password using
0 — 9.
6Enter the same 4-digit number as in step 5 to
confirm.
Option menu
Option
Audio output select
Auto volume
Demo
Software update
HAudio output select
You can select which device is used for outputting
audio.
Option Description
Headphone Output audio through headphones.
Audio out Output audio through an A/V receiver or
surround audio controller.
NOTE
• If you select “Headphone” when a cable is inserted in the
AUDIO output terminal, the TV speakers are muted and all
Audio menu items cannot be adjusted.
• If you select “Audio out”, sound via the AUDIO output
terminal is not adjustable and constantly outputs.
Regarding the headphone jack
• Use headphones with a stereo mini plug ( 3.5 mm).
• Be sure to unplug headphones from the jack when they
are not in use.
Volume display when headphones are plugged in
30
CAUTION
• AUDIO output terminal is also used for headphones.
Reduce the volume before using headphones.
Overwhelming sound may damage your hearing.
HAuto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
HDemo
When “Demo” is set to “On”, after all the settings are
completed, the Demo screen is displayed if there is
no operation for several minutes. (On, Off)
HSoftware update
Allows you to update to the latest software.
Block programme
Allow you to lock certain programme.
HInput setting
Colour system (AV input mode only)
You can change the colour system to one that is
compatible with the image on the screen. (Auto,
PAL, SECAM, NTSC 4.43, NTSC 3.58)
NOTE
• If “Auto” is selected, colour system is automatically set.
If an image does not display clearly, select another colour
system (e.g. PAL, NTSC 4.43).
• “Colour system” is selectable only when inputting a
composite signal.
Label
To enter the name of the channel. Maximum 7
alphanumeric can be input.
• Press a/b: To select a desired alphanumeric.
• Press c/d: To move to the desired alphanumeric
position.
• To exit, press ENTER.
• If the wrong alphanumeric is entered, select [ ] to clear.
HHDMI auto view (HDMI input mode only)
Selected item Description
Enable/
Disable
Set whether or not to use the Auto
Selection of WIDE MODE based on signal
recognition received from the HDMI
signal.
HLanguage
Select from among 10 languages: English, Simplified
Chinese, Arabic, French, Portuguese, Russian,
Persian, Thai, Vietnamese and Indonesian.
HIdentification
You can check the current version of the software on
the screen.
HSoftware license
You can read the software license on the screen.
HReset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute “Reset”, all the settings such as “Picture”,
“Audio” and “Programme setup” will be reset to the factory
preset values.
Colour adjustment
Allows you to adjust the colour tone of the image
displayed on the screen.
1Press COLOUR ADJ., the colour adjustment
screen will display.
2Press a/b/c/dto adjust the colour to your
desired setting.
Button Description
aWhite with greenish tone.
bWhite with reddish tone.
cWhite with bluish tone.
dWhite with yellowish tone.
RReveal/hide the setting screen.
GReset setting.
BClose the setting screen and unfreeze
image.
ENTER Save/exit setting.
NOTE
• The colour adjustment screen will automatically goes out
after 30 minutes.
SUPER ECO mode
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Selected item Description
SUPER ECO
ON
Reduces the backlight brightness.
SUPER ECO
OFF
Normal setting of backlight brightness.
SUPER ECO status will be displayed on the channel
information window.
Timer
Press TIMER to set the Sleep timer or Reminder for
an activity.
HSleep timer
This function is conveniently used when, for instance,
going to bed while watching TV.
(Off, 0 hr. 30 min., ......, 2 hr. 30 min.)
H(Reminder)
This function is to set a reminder for an activity.
Press a/bor ENTER to set.
NOTE
• If you turn off the TV, the counter will be reset.
LC-32_40LE185M_G602_EN.indd 6LC-32_40LE185M_G602_EN.indd 6 4/21/2016 1:51:11 PM4/21/2016 1:51:11 PM

13 14
USB Media Player
HSelecting modes
Photo Music Movie
1Press INPUT to select the “USB” mode.
2Press c/dto select “Photo”, “Music” or
“Movie”, and then press ENTER.
3Press c/dto select your USB directory, and
then press ENTER.
4Press a/b/c/dto select the desired folder,
and then press ENTER.
NOTE
• “Wide mode” is fixed during “Photo” and “Music”.
• Depending on the USB device, the TV may not be able to
recognise the contained data.
• A file name with more than 10 characters may not be
displayed all (depending on the character set).
• Files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• The compatibility of USB HDDs may not be guaranteed.
PHOTO slideshow
C:\Photo 1/2
Back
Fireworks.jpg
Switzerland.jpg Japan-hokkaid.. Island.jpgSea turtle.jpg
Ski Action.jpg
Title: Ski Action.jpg
Resolution: 3840x5760
Date: Sat, 25 Aug 2012
Time: 11:04
When you press PHOTO, the TV screen will
automatically play the photo slideshow.
• If there is no USB drive, the TV will switch to Selecting
modes screen.
• Photo slideshows will autoplay only for the photos located
on the top layer of USB drive. To enable autoplay for
photos located in a subfolder, you need to manually select
the subfolder, and then press PHOTO.
You can select the duration for each photo to
display, and also the duration for the slideshow to
play.
Duration for photos to display
1 minute10 seconds5 seconds3 seconds
Duration for slideshow to play
Continuous3 hour1 hour
• The TV will automatically power off after the
selected playtime ends.
NOTE
• Background music will autoplay during a slideshow only if the
music file is located in the same folder with the photo files.
• If you want to stop the photo slideshows, press RETURN to
exit.
List of files compatible with USB mode
USB device/
File system
USB Memory / FAT/FAT32
Photo file format BMP, JPEG, PNG, GIF
Music file format
(Files may not be
playable depending
on the bitrate)
MP3 (.mp3) Bitrate: 32 k, 40 k,
48 k, 56 k, 64 k, 80 k, 96 k,
112 k, 128 k, 160 k, 192 k, 224 k,
256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k,
48 kHz
Video file format
File extension Container Video
*.avi AVI XviD
H.264
MPEG2
*.mkv MKV H.264
MPEG2
MPEG1
*.mp4 MP4 XviD
H.264
*.vob VOB MPEG2
*.mpg/*.mpeg PS MPEG2
MPEG1
*.rm/*.rmvb RM RM codec
*.ts/*.trp/*tp TS H.264
MPEG2
*.dat DAT MPEG2
MPEG1
USB Media Player (Continued)
Control panel for photo/music/movie mode operations
• Press Bto display the control panel below.
Button/menu Description Photo Music Movie
ENTER When selecting a folder icon: Enter this
directory.
When selecting a thumbnail:
Play the selected file.

Play/Pause. 
Rewind. Each time you press rewind, the speed
will change (2x, 4x, 8x, 16x). –
Fast-forward. Each time you press fast-forward,
the speed will change (2x, 4x, 8x, 16x). –
Play the previous file. 
Play the next file. 
Stop playback and return to the list of files. 
Loop. Each time you press ENTER, the mode
will switch between Repeat t No repeat. 
Play/cancel the background music. ––
Mute. Press ENTER to toggle between mute
and unmute. –
Two loop. Press ENTER to set the current
playback time starting point. Press ENTER to
set the loop end of the current playing time and
start loop playback. Press ENTER button to
cancel the loop.
––

Slow-forward.
Each time you press slow-forward, the speed
will change.
––

Step forward.
Each time you press ENTER, the picture will
change to the next still picture.
––

Rotate clockwise 90º. ––
Rotate counterclockwise 90º. ––
Zoom in an image. Select to display larger
image size. ––
Zoom out an image. Select to display smaller
image size. ––
Select playback length of a slideshow. ––
Select photo display interval. ––
Slide effect. ––
NOTE
• Files in folder which are not related to a selected mode cannot be accessed.
• “Unsupport file” alert will pops up for a selected file of invalid format.
• Press Rto change movie subtitle.
LC-32_40LE185M_G602_EN.indd 7LC-32_40LE185M_G602_EN.indd 7 5/9/2016 2:38:13 PM5/9/2016 2:38:13 PM

15 16
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem Possible Solution
• No power. • Check if you pressed POWER on the remote control unit. (See page 7.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 7.)
• Unit cannot be operated. • External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Is battery inserted with polarity (e, f) aligned? (See page 6.)
• Is battery worn out? (Replace with new battery.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light shining on the remote control sensor?
• Picture is cut off. • Are screen mode adjustments such as picture size made correctly?
(See pages 9 and 10.)
• Strange colour, light colour, or
dark, or colour misalignment.
• Adjust the picture tone. (See page 9.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 9 and 11.)
• Check the HDMI auto view setting. (See page 11.)
• Power is suddenly turned off. • The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the ECO setting. (See pages 11.)
• Is the sleep timer set? (See page 12.)
• No picture. • Is the connection to external equipment correct? (See pages 4 and 5.)
• Is the “Picture adjust” correct? (See page 9.)
• Is the antenna connected properly? (See page 4.)
• No sound. • Is the volume too low? (See page 6.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature:
f20°C to e60°C.
Clearing the password
1Repeat steps 1 to 2 in Setting a password. (See page 11.)
2The password input screen displays.
3If you enter “3001” using 0 – 9, the “Child lock” setting menu will be displayed.
4Enter the 4-digit number as a password using 0 – 9. The new password is now set.
Specifications
Item Model LC-32LE185M LC-40LE185M
LCD panel 80 cm 102 cm
Resolution 1,049,088 pixels (1366 g768) 2,073,600 pixels (1920 g1080)
Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43
TV
Function
TV-Standard PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1NTSC: M
Receiving
Channel
VHF/UHF 43.25—863.25 MHz
CATV S1—S41ch (including Hyperband)
TV-Tuning System Auto Preset 99 ch
STEREO/BILINGUAL NICAM: B/G, I, D/K A2 stereo: B/G
Viewing angles H : 178º V : 178º
Audio amplifier/Speakers 5 Wg2 / 4 g7 cm 2pcs
Terminals Antenna input UHF/VHF 75 qDIN type
INPUT 1 HDMI (HDMI input), PC input
INPUT 2 VIDEO in, AUDIO in
USB USB
OUTPUT AUDIO out, Headphone ( 3.5 mm stereo)
OSD language English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
Power Requirement AC 110—240 V, 50/60 Hz
Power Consumption 36 W (0.6 W Standby) 62 W (0.6 W Standby)
Dimensions without stand 732 (W) g450 (H) g75 (D) mm 905 (W) g538 (H) g78 (D) mm
with stand 732 (W) g465 (H) g144 (D) mm 905 (W) g560 (H) g178 (D) mm
Weight 4.7 kg (without stand) / 4.9 kg (with stand) 6.8 kg (without stand) / 7.0 kg (with stand)
Operating Temperature 0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
LC-32_40LE185M_G602_EN.indd 8LC-32_40LE185M_G602_EN.indd 8 4/21/2016 1:51:11 PM4/21/2016 1:51:11 PM