Sharp AQUOS LC-37AD5E Quick start guide

Re-tuning: SHARP Digital TVs 9 Steps
(Steps 1 – 5)
This guide can be used to help you re-tune any of the following products with the remote control below:
1) If you are not in DTV
mode press the DTV
button and then the OK
button
LC37AD5E & LC42AD5E
2) Press the DTV MENU
button and the DTV
Menu screen displays
3)
Pth
RhtA
Make sure your TV is on and press 80
for the BBC News Channel
3)
P
ress
th
e
R
g
ht
A
rrow
button to select the thid
option "Installation" and
then press the OK button
4) Press the Down Arrow
button to select the first
option "Auto Installation"
and press the OK button.
5) f you have reset the
PIN enter the new
number here, otherwise
enter the factory preset
PIN "1234".
Sharp Helpline: 08707 874837 Email: sharp_[email protected]
Page 1 of 2
* This process may affect any saved information stored on your product, including your
favourites list. Please consult your instruction manual or contact Sharp using the details above.

Re-tuning: SHARP Digital TVs
6) A confirmation
message appears asking
if you wish to start the
installation. Press the
Right Arrow button to
select Yes and press OK
to start the search.
7) The TV will now start
scanning for digital TV
channels.
No action required.
9 Steps
(Steps 6 –9)
Sharp Helpline: 08707 874837 Email:sharp_ope[email protected]
Page 2 of 2
* This process may affect any saved information stored on your product, including your
favourites list. Please consult your instruction manual or contact Sharp using the details
b
8
)
O
nce the re-tuning
has been completed a
"scan completed"
confirmation message
will appear for a few
seconds.
9) The menu will
diasappear and BBC1
will appear.
No action required.
a
b
ove.