
TROUBLESHOOT
PENYELESAIAN
TROUBLES ELIMINATION OF TROUBLES
MASALAH TINDAKAN
a. The gas valve is not open. Open the gas valve and supply the gas.
Katup gas tidak terbuka. Buka ikatup gas dan masukkan gas.
b. The rubber pipe is bent. Straighten it or replace it with a new one.
Selang gas bengkok. Luruskan atau gantikan yang baru.
c. No gas in the cylinder. Replace it with a new one.
Tidak ada gas di dalam tabung. Gantikan dengan yang baru.
Fail in Ignition d. The nozzle or the burner is blocked out. Pass through the hole with a wire.
Tidak menyala Saluran nozzle tersumbat. Bersihkan lubang nozzle dengan kabel.
e. There exists air in pipe. Open the nozzle, leave the air out.
Terdapat udara pada pipa. Buka saluran tersebut dan biarkan udar
keluar.
f. The wire of the electronic switch is Put the wire on the pole needle.
dropped out.
Kabel Ekectronik knop tercabut. Masukkan kabel ke dalam lubang.
g. The electronic switch turns too fast. Knob remain the position for a second,
then turn it.
Knop elektronik bergerak terlalu cepat. Pertahankan posisi knob sementara
dan putar.
a. There exists gas leakage in the gas pipe. Replace the seal ring.
Kebocoran gas pada pipa gas. Ganti ring pengunci.
Other Problem b. The rubber pipe is broken. Replace the rubber pipe.
Masalah Lain Selang karet rusak. Ganti selang karet.
c. There is no flame. Ignite once again.
Tidak ada api. Nyalakan sekali lagi.
The combustion a. The pressure is too low or too hjgh. Adjust the valve or change the gas.
is not a normal Tekanan terlalu tinggi atau rendah. Atur katup atau ganti gas.
condition b. The burner is not in right position. Set the burner at a optimal position.
Pembakaran Tungku pembakar pada kedudukan Atur tungku pembakar pada kedudukan
tidak dalam yang tidak betul. yang optimal.
kondisi normal c. The air inlet is not a normal condition. Adjust the air inlet valve.
Aliran udara tidak normal. Atur katup aliran udara.
CAUSE
SEBAB-SEBAB