Sharper Image 207811 User manual

- 1 -
Item No. 207811
WIRELESS CASSETTE PLAYER
User Guide
Thank you for purchasing the Sharper Image Wireless Cassette Player. Please take a moment
to read this guide and store it for future reference.

- 2 -
INTRODUCTION
The Sharper Image Wireless Cassette Player lets you enjoy your favorite cassettes once again, by
streaming the music from the player to your own wireless speakers, earbuds or headphones. If you
do not have a wireless receiver, you can connect wired speakers, earbuds or headphones via the
3.5mm auxiliary line-in jack.
FEATURES
• Compact cassette player
• Stereo L-R audio
• Wireless and wired connections
• Automatic wireless search and pairing
• Wireless range 30 ft. (10m)
• USB or battery power (2 AA batteries required)
• Rotary volume knob
• Auto reverse
• Auxiliary line out/headphone jack

- 3 -
IDENTIFICATION OF PARTS
1. Lid Locking Switch: Slide down to open the lid and insert cassette.
2. AUX Port: 3.5mm auxiliary line jack allows you to connect wired speakers or headphones.
3. Volume Control: Rotary knob to adjust music volume.
4. Wireless LED Indicator:
Quick flash (1 time per second): Searching for wireless device.
Slow flash (1 time per two seconds): Successfully paired with wireless device.
5. Transparent Window: Lets you see the cassette as it is playing.
6. Cassette Player Buttons:
PLAY Press to play cassette
STOP Press to stop playing the cassette
FF Press to fast forward cassette
REW Press to rewind cassette
DIR Press to change the direction of the cassette playing
Auto Reverse switch. Slide to activate Auto Reverse. When one side ends, the other side will
begin playing automatically.
7. DC Port: 5V DC power supply jack.
POWER SUPPLY
The Wireless Cassette Player can be powered by the USB cable in the package OR 2 AA batteries
(not included). To insert batteries, open the lid of the deck, and insert 2 AA batteries in the
compartment.
OPERATING THE WIRELESS CASSETTE PLAYER (WIRELESS CONNECTION)
1. Insert a cassette into the device.
2. Power on your wireless speakers/earbuds/headphones.
3. Press the “PLAY” button on the top of the device.
4. The Wireless Cassette Player will search for your wireless device. The wireless indicator light will
flash quickly (about once per second) while it searches.
5. The wireless indicator light will flash slowly (about once every 2 seconds) when it has paired
successfully. You should hear the sound from your wireless receiver. NOTE: Wireless search will
turn off automatically in 3 minutes if there is no pairing. Turn off both devices and try pairing
again.
OPERATING THE WIRELESS CASSETTE PLAYER (WIRED CONNECTION)
To connect wired speakers, earbuds or headphones, plug them into the 3.5mm “AUX” jack on
the device.

- 4 -
SPECIFICATIONS
Wireless Version 4.2
Wireless Range 30 ft. (10m)
Supporting Agreement A2DP, AVRCP, AVCTP, AVDTP, HFP, SPP, SMP, ATT, GAP, GATT, RFCOMM,
SDP, I2CAP
Signal-to-Noise Ratio >90dB
Frequency Range 2.402GHz - 2.480GHz
Audio Channels Stereo L/R
Audio Output 3.5mm earphone jack, wireless transmitter
Power Supply 2*AA Battery or USB (5V DC)
Bit Rate 128 Kbps
Dimensions 4.4” L x 3.3” W x 1.3” H
Weight 0.4 lbs.
WARRANTY / CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. If you have any questions not covered in this guide, please call our Customer
Service department at 1 [phone]. Customer Service agents are available Monday through
Friday, 9:00 a.m. to 6:00 p.m. ET.
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.