Sharper Image Body Furnace Specification sheet

GET STARTED

WELCOME TO BODY FURNACE®
Thank you for purchasing the Body Furnace with
Bluetooth Wireless Technology. With app-enabled
custom heat settings, Body Furnace represents the next
generation of personal heating technology. Body Furnace
uses patented reflective heat technology to direct heat
to your core, allowing your body to maintain a stable
temperature and keep your extremities warm.
Perfect for outdoor events, sporting and camping, Body
Furnace is intended to be used in any cold setting and
enables outdoor enthusiasts to enjoy their favorite
activities in comfort. These operating instructions provide
directions on how to properly use and maintain your
new device.
We are confident your cold weather activities will be
more comfortable and enjoyable than ever before.
Enjoy your purchase,
Brownmed
www.body-furnace.com

PACKAGE CONTENTS
• Body Furnace Heating Unit
• Universal Strap
• USB Wall Charger
• USB Cord
• Instruction Booklet
Things you need to know before using the Body Furnace.
• Maintaining a comfortable heat level is easy with the
use of the Body Furnace personal app.
• Do not use directly on skin. Always wear Body Furnace
over a thin insulating layer.
• For best results, turn Body Furnace on before going
outdoors.
• Only use the charging unit included with the device.
• The Body Furnace is durable enough to carry without
a protective case, just throw in with your gear and go.
• Once Body Furnace has been fully charged, it will
provide up to 6 hours of constant heat on low.
Ambient temperature and operating environment
will affect overall run time.

- QUICK START 4
FIRST TIME POWER-ON APP MODE
Begin by downloading smart phone
app and pairing the Body Furnace
with your smart phone. Ensure
the Body Furnace unit is ready for
pairing by following the steps to
power-on in manual mode.
Control
Button
LED Indicator Lights
BLUETOOTH
Hold 5 seconds while off.
Repeat until connected.
BLUETOOTH CONNECTED

QUICK START - 5
FIRST TIME POWER-ON MANUAL MODE
USING THE BODY FURNACE ON-UNIT CONTROLS
To operate the Body Furnace without the use of
Bluetooth® technology, use the control button located
on the front of the Body Furnace unit.
While the unit is off, press and hold the control button
for 2 seconds until the blue light illuminates.
Release the button and press again to cycle through
3 temperature modes.
OFF
ON / NO HEAT
hold 2 seconds
Adjusting heat
Low 100° F
Med 120° F
High 140° F

- QUICK START 6
USING UNIVERSAL STRAP
First, pull one end of strap through one loop on end
of Body Furnace. Press gently to keep strap closed
and in place.
Wrap the universal strap around back holding
Body Furnace on your core.

QUICK START - 7
USING UNIVERSAL STRAP
Pull strap through second loop and adjust fit by pulling
both strap ends outward then back until the strap fits
comfortably. Press firmly on the hook and loop tabs
to ensure a firm hold.

- QUICK START 8
ADJUSTING HEAT - IN APP METHOD
Once your smart device
is paired with the Body
Furnace use the arrows
or the control wheel to
customize your
heat settings.

QUICK START - 9
ADJUSTING HEAT - ON-UNIT METHOD
While the unit is off, press and hold the control button
for 2 seconds until the blue light illuminates.
Release the button and press again to cycle through
3 temperature modes.
Control
Button
LED Indicator Lights
Adjusting heat
Low 100° F
Med 120° F
High 140° F

- QUICK START 10
RECHARGING AND STORAGE
Recharging is simple. Insert charge cable USB into
charging adapter. Insert the other end of the charge cable
into the charge port located under the logo on the front
of the unit.
Store Body Furnace in its original
packaging in a cool, dry place.