Shelldome SH-RO46 Instruction Manual

Covering Your World
FABRIC BUILDING INSTRUCTIONS
MODEL: SH-RO46
L4 x W6.1 x H 3.55
PICTURE MAY NOT REFLECT THE EXACT MODEL
TO OUR NEW AND VALUED CUSTOMER
ThankyouforpurchasingyournewInstantShelter.Weknowyouwillhaveasmuchplea-
sureowningyournewshelteraswehadinmakingitforyou.Oursheltershavebeen
designedforrapidassemblyandminimalmaintenance.Wehaverigorousqualitycontrol
ateverystepofthesheltersmanufacturingprocesstoinsureyouthebestunitmoneycan
buy.Ourpartsaretriplecheckedpriortopackagingtoinsureyouwillhaveeverythingyou
needbeforeyoustart.Intheunlikelyeventthatapartisdamagedormissing,youshould
immediatelycontactyourplaceofpurchaseforaspeedyreplacement.

About Safety
Covering Your World
Workingwithorunderheavypartsincludedwiththissheltercancauseseriousheadinjury.
HEAD PROTECTION IS RECOMMENDED!
YouwillbeworkingwithmetalpartswhichmayhaveSHARPedges
WEAR GLOVES
UndergroundPOWERCABLESorGASLINESmayresultininjurywhilesecuringtheshelter.Itmayalsoresult
inhavingtomovethebuilding.Acursorycheckwiththelocalbuildingauthoritieswillhelpalleviatethese
concerns.
CHECK WITH YOUR LOCAL AUTHORITIES
Itishighlyrecommendedthatscaffolding,laddersandmechanicalliftingequipmentconformtoalllocal
buildingcodeswhenerectingtheshelter.Safetystrapsandharnessesshouldbeusedatalltimes.Themetal
structureoftheshelterhasnotbeendesignedforhumanweight.Erectingshelterduringwindorrainis
unsafeandcouldresultinseriousinjury.
CLIMBING EQUIPMENT
Checkyourlocalweatherforecastpriortoplanningyourbuildingday.Wind,snowand/orrainmaycause
unsafeconditionsthatcouldleadtoseriousinjury.
CHECK LOCAL WEATHER CONDITIONS
Checkalllocalbuildingcodespriortostoringanyhazardousmaterial.Sheltermayrequireadditionalventila-
tiontomeetlocalcodes.
STORING HAZARDOUS MATERIALS
Workinginandaroundtheportableshelterduringsevereweatherisnotrecommended.Seriousinjury
couldresult.Intheeventthatextraordinarilyseverewind,snoworothersevereconditionsarepredicted
andiftimepermits,itisrecommendedthatthesheltercoverberemoved.
SEVERE WEATHER CONDITIONS
CheckShelterforcoworkersbeforelockingup.Alwaysprovideforescapeincaseofemergency.
PREVENT ENTRAPMENT

Covering Your World
Shouldtheshelterrequirerelocationordisassemblyforanyreason,itisstronglyrecom-
mendedthatthestructureanditscoverarethoroughlyinspectedpriortorebuilding.
SHELTER RELOCATION
Aswithallstructures,periodicinspectionofthecoverandallstructural-componentsis
highlyrecommended.Tighteningthecoverandthestructurewillprolongthelifeofyour
investment.
CommonSenseistheknackofseeingthingsastheyare,anddoingthingsastheyought
tobedone.
PERIODIC SHELTER INSPECTION
PriortoassemblingyourNewPortableShelter,unpackallcratesandcompleteaninven-
toryofallpartsaccordingtothefollowinglistanddiagrams
UNPACKING & IDENTIFYING PARTS
PLEASE BE SafetyCONSCIOUS!
THANK YOU FOR CHOOSING OUR SHELTER

Covering Your World
PARTS LIST FOR SH-RO46
1
Parts# Descriptions Diagram
Dimensions
( in mm )
Q'TY
1
Φ45x1550 4
2 Φ45x1550 8
3 Φ45x1550 4
4 Φ45x1140 8
5 Φ45x1400 8
6 Inside door vertical tube(lower) Φ45x1400 4
7 Inside door vertical tube(upper) Φ45x1318 4
8Φ45x1670 4
9 Φ45x1670 2
10 Φ45x420 4
11 Φ38x1277
12 Φ38x1277 12
13 Φ45x800 2
14 Door frame base rail 25x70x500 4
16 25x70x1407 2
15 25x70x1316 4
17 Φ45 2
18 2
Door sliding cable support hook
Upper door vertical support connector
Side base rail
Side base rail(end)
Purlin
Top and side roof purlin
Side door frame cross support tube
Upper door cross tube(mid)
Upper door cross tube(left/right)
Side vertical rafter(leg)
Side upper curved rafter
Roof arched rafter(lower end)
Roof arched rafter
Top roof arched rafter(left)
Upper door vertical support
9
3x25

Covering Your World
PARTS LIST FOR SH-RO46
22
Parts# Descriptions Diagram
Dimensions
( in mm )
Q'TY
19 Cover conduit 2
20 Cover conduit 6
21 Zipper tool(open/close) 1
22 Fixer 34
23 Φ6x5000 2
24 12
25 12
26 16
27 16
28 104
29 8
30 6
31 4
32 12
33 6
34 4
35
2
36 8x60x150 4
37 M12x120 8
38 25x700 6
Door sliding cable（S:18pcs）
Roof bracing cable kit
Side wall bracing cable
Single-way clamp
Anchor
Screw, washer and nut
Screw and washer for door frame
Screws for base rail
Screws for door base
Screw, washer and nut for ratchet
Ratchet tie-down
Door bracing cable kit
Fixer band
Fixer Steel plate
Door wedge anchor(#36)
Strap band (for ratchet)
Φ6x5430
3x30x75
M8x15
M8x100
M8x100
M8x75
M8x75
M16x350
Φ45
Φ6x2460
Φ6x3260
Φ45
Φ16x1000
Φ28x1020
Φ28x1020

Covering Your World
PARTS LIST FOR SH-RO46
22
39 40
door cover
Ball Type Bungee
Cover locker-up T-2
Parts# Descriptions Diagram Dimensions
( in mm )
Q'TY
40
Φ5x33
68
41 Main Cover 1
42 2
43 upper cover 2
44 #13 - 16 2
Wrench

Covering Your World
PARTS LIST FOR SH-RO46
23
L4 x W 6.1x H3.55m SH-RO46

Covering Your World
SH-RO46 Main Dimension(mm)
24
※サイズは約です。必ず現物で合わせてください。

Covering Your World
Base drawing
25
※サイズは約です。必ず現物で合わせてください。

Frame Assembly Steps
Covering Your World
Step 1: Measure according to above drawing, then Place and connect base rails as illustrated below with
#15,#16,#17,Fix to ground with #27,Then install the ratchet on it.
Step 2: Install the first row of rafters with#1,#2,and #3,#4,#5,then put into base feet,(It is very important to hold the
first row of rafter with wood, rope and etc to avoid the hurts and damage of falling down.)
26

Covering Your World
Step 3:Install the second row of rafter with #1,#2 and #4,#5,put into the base feet, then connect with first row with
#11and #12,brace them with #24,#25.
Step 4:The same step to install other rows of rafters.
27

Covering Your World
Step5: Install the door frames as illustrated below，then fasten all the screws and parts.
Tips: The tools below may needed while installing the shelter.
28

Roof Cover Assembly
Covering Your World
TIPS : Slide the roof cover over assembled frame from one side
insert the conduit to pocket on side:
Pocket for side wall conduit
Ratchet tie down for tension-
ing the Side wall (roof cover)
9
#19 #20
#41
#38

Covering Your World
Step 2 : Attach the cover (#35/#36) to the frame as following :
Note:#39 for main roof cover tensioning.
#40 for front and end covers tensioning.
Your assembled shelter will be similar to the illustration as below :
Illustration for Ratchet
#42 #43
#40
10
#39
#21