Shenzhen Bondidea Technology BD9588G Mounting instructions

REV：A0 BD9588G USER MANUAL Page 1 /5
Shenzhen Bondidea Technology
Model： BD9588G
Specification： 2.4G Wireless Mouse
Describe： 3D Optical Mouse
Approved ： Checked： Made：
USE MANUAL

REV：A0 BD9588G USER MANUAL Page 2 /5
Shenzhen Bondidea Technology
Product Appearance and key function definition
Product Features
1、Adopt 2.4G bidirectional transmit technology，34 channels，super anti-interference;
2、Adopt high resolution, accurate position;
3、Super ability for replacement, use up freewheeling;
4、Strong dormancy power-saving design and can achieve economize electricity at level 3 .When it under deep
sleep mode the electric current will less than 100uA;
LED light will out of work and that access super save electricity mode within 10 min ,when it no use ,and it
can fall into deep sleep mode automatic;
(now the mouse almost no longer power consumption, press any key immediate wake up. )
5、Ensure you of working 360 degrees freely and say goodbye to wire;
6、No need code intelligence connection technology;
7、Ergonomic design for appearance，close to palm，use freely and can not tire.
8、The baking finish and flame plating technology of appearance are very fashion，Wear-resisting prevent
slippery.
9、Nano receiver, built-in mouse, very convenient;
10、Power on-off design, turn off the mouse power, it can prolong batteries life when no use;
11、Working voltage： 1.5V （AA）
12、Main size: 98*54*27mm
Middle Button and
Scroll Wheel Right Button
Left Button DPI Key
BD9588G
Receiver

REV：A0 BD9588G USER MANUAL Page 3 /5
Shenzhen Bondidea Technology
System Compatibility
1．Suitable Model: IBM PC/AT Compatible, Power Macintosh
2．Operation Systems: Windows 2000/XP/Vista/WIN7/MAC
3．Interface: USB
Technical Parameters
Mouse:
1． Rating working voltage 1.5V
2． Rating working current 10mA
3． Maximum acceleration 3 0 i p s
4．Resolution 800-1200-1600DPI
5．Wireless working channels 34 auto frequencies
6．Working frequency 2.408-2.474GHz
7．Working distance >10meters
Receiver:
1． Rating working voltage 5V
2．Rating working current 30mA
Pull out the receive and the battery installation steps
1．Open the mouse at the bottom of the battery cover.
2．Take out the 1 AA alkaline battery from the package.
3．Put the batteries into the battery cell according to the right pole . (Please don’t install in the opposite pole , or it will harm）
4．Pull the battery cover into the mouse and take out receive.
Receiver
Open th e battery
cover a ccording to
arrows
Power switch

REV：A0 BD9588G USER MANUAL Page 4 /5
Shenzhen Bondidea Technology
Install the receiver and connect the Parameters
1．Pull out the receiver from the bottom of the mouse . As picture three shows:
2．Pull "ON" to the mouse power switch .As picture four shows. After computer automatic identification and mouse can use.
DPI switch function
1．DPI default is 1200DPI
2．DPI key can switch between 800-1200-1600 DPI.
Nano Receiver
DPI indicator place

REV：A0 BD9588G USER MANUAL Page 5 /5
Shenzhen Bondidea Technology
Attention
1．It can prolong the batteries life if you use the mouse on the white surface.
2. Auto-sleeping and power-saving function, it will be auto-sleeping without operation within a long time, press any key or
scroll wheel to activate it.
3. Optical may not normal use in smooth desktop , glass , reflective , dark black and 3D mouse pad .。
4. Please turn off the power if you‘re in traveling or you’ll not use it for a long time.
5. When mouse work on metallic surface, the best way is to place a mouse pad under mouse or lay the receiver horizontally to
achieve the optimal receiving effect.
6. No need to connect data again when replace battery (built-in memory function.)
.
Technical Instructions
Adopt 2.4G Hz wireless high freq uency technology, s atisfying Europe R&TTE Direct ive1999/5/EC requirement, its
radiation w ill not harmful for men’s body (m uch less tha n mobile radia tion), w ireless em ission w ill oc cur elec tromagnetic
signal, please be caution to use when in the using heart pacemaker or related to body assistant instrument surroundings
Disclaimer
We made every effort to ensure that the information and procedure in this guide is accurate and complete, no liability
can be accepted for any errors or omissions and reserves the right to make any changes without further notices to any products
herein.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.