SHENZHEN HDCVT CV-HDM-962 User manual

HDMI 1.4 Matrix 6×2
User manual
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this
manual for future reference.
I. Introduction

The HDMI matri 6*2 with 4k 2k supported which allows HDMI signal from any of its si
sources to be routed to and displayed on any of its two connected HDMI displays
simultaneously. It supports 3D, 3Gbps bandwidth, 12-bit Deep Color, Hi-Def lossless audio and
other features defined by HDMI specifications. The management of source/ sink scenarios can
be operated easily through on-panel buttons, IR remote control.
II. Features
Compliant with HDMI 1.4a, CTS 1.4a, DVI 1.0.
HDMI 1.4 support: Audio Return Channel (ARC), 3D TV support, CEC1.4.
Support 3D Video & 4K 2K, 8, 10, 12 & 16 bits per color depth.
Support MHL input, Share your smart phone photos, music and movies on the TV.
Support PIP display function.
Audio support: HDMI 1.4 compatible audio interface Dolby TrueHD DTS-HD Master Audio
7.1CH
2

Full audio input and output support
III. Package
HDMI 1.4 Matri 6*2------------------------------1PCS
5V/2A DC Power Supply Adapter---------------------1PCS
Remote control---------------------------------------1PCS
Operation Manual ----------------------------------1PCS
MHL to HDMI Cable (optional)
IV. pecifications
Frequency Bandwidth 2.97Gbps
Input Ports 6 HDMI Female.
Output port 2 HDMI Female; 1 Toslink,1 Earphone
3

HDMI Audio Output PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1, D-TrueHD, DTS-HD
Power Supply 5V/2A DC (US/EU standards, CE/FCC/UL certified)
ESD Protection Human Body Model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) 250(D) 110 (W) 26(H)
Weight (g) 720
Power Consumption(ma ) 10W
Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F
Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F
V. Operation controls and Functions
Front Panel
4

ON/OFF: Power on/off switch.
Input LED: These red LED illuminate when the output select to the corresponding input.
Audio EDID LED: These red LED illuminate when the audio EDID select to corresponding
audio.
ARC LED: This red LED illuminate when the ARC function open.
POWER LED: This red LED illuminate when the device is connected with power supply.
OUTA: Press this button to select the input source to HDMI OUT A.
OUTB: Press this button to select the input source to HDMI OUT B.
EDID: Press this button to select the 2.0CH,5.1CH,7.1CH audio output mode.
ARC：Press this button to open or close the ARC function.
5

RST: Press this button the matri will reset to factory state(INPUT1, 2.0CH AUDIO
MODE,ARC function closed)
Rear Panel
Input Source: These slot is where you connect the HDMI source output from DVD, PS3.
HDMI OUT: This slot is where you connect the HDTV or monitor with HDMI cable.
Toslink OUT: This slot is where you connect to the amplifier with optical fiber cable.
Stereo OUT: This slot is where you connect to the speaker with 3.5mm earphone cable.
DC IN: Plug the 5V DC power supply into the unit and connect the adapter to AC wall outlet.
6

Attention:
1. The Toslink and Stereo audio follow the OUT A HDMI
audio.
2. The In6 （The si th input port ）support MHL input
only,use MHL to HDMI Cable to connect smart phone and
matri .
Remote control
STANDBY: Press this button will standby or power on the
matri .
Audio EDID: Press this button will Select the audio output
mode (2.0CH,5.1CH,7.1CH), and the LED will indicate
the corresponding state .
ARC: Press this button will Open or close the ARC function,
7

and the LED will indicate the corresponding state.
PIP: Press this button will Open or close the PIP function.When open PIP function,the OUTA
and OUTB will switch to the same input source.
Select: Press this button will select the PIP source.
Enter: Press this button will confirm the select PIP source.
OUTA: Press these buttons will fast switch to select input source to HDMI OUTA. and the LED
will indicate the corresponding input source.
OUTB: Press these buttons will fast switch to select input source to HDMI OUTB. and the LED
will indicate the corresponding input source.
ARC function: If you need to use ARC, your HDTV must support this function, when you open
the ARC function, the Toslink of the Matri will output the HDTV current display content
audio. Otherwise it will output the Matri input source audio.
8

VI. Application Example
9