SHEWE K3072 User manual

2. Put the lid back and
ensure spout is not close or
face to wall or cabinet.
1. Fill kettle with desired
amount of water.
B
Normal
Use
1. Fill kettle with “MAX” water. 2. Put the lid back. 3. Leave the kettle back to
the base and can hear
beep sound.
A
Before
Use
4. Press the Program button
to set “212℉” temperature.
5. Press the start button
once and the lights flash,
the kettle begins to boil.
6. Once finishes boiling,
pour off water.
7. Your pour over kettle is
ready for use.

D
When any light on, press
the “Start” button for 3
seconds to set the Mute
mode.
Mute
Setting
C
Pause
Setting
During operation (lights flashing),
press “Start” button (lights stay
on) and boiling pause, press
“Start” button again within 5
mins kettle resume to work or
kettle turns off .
4. Press the start button once
and the lights flash, the
kettle begins to boil.
3. Press the Program button
to select desired temperature.
5. When the set temperature
is reached, the lights stay on
( If mute mode is not set, it
will beep 3 times ), and after
5 seconds, the lights off.
E
Keep Warm
Setting
After temperature set, press
the “Program” button for 3
seconds (lights stay on).
Press the “Start/Cancel” button
(lights flashing) kettle will start
Keep Warm for 2 hours after
water reaches setting temperature.