shokz OpenMove User manual

User Guide
OPENMOVE
S661

Restore Factory Settings
Contents
HOW IT WORKS
How to Wear
Volume
Multifunction Button
Check Battery Status
Headphone Controls
ON/OFF
Pairing
Multipoint Pairing
EQ Modes
Turn Multipoint Pairing Off
Switching EQ modes
EXTRA FEATURES
Warranty
Changing languages
Storage and Maintenance
Charging Tips
CARE AND MAINTENANCE
CONTENTS
01
04
05
06
07
08
09
11
13
14
15
21
23
25
28
29
31

REGULATORY AND LEGAL INFORMATION
WHAT’S IN THE BOX
TROUBLESHOOTING
CONTENTS
02
32
33
34

How It Works
03

USB-C Charging Port
Volume - Button
LED Indicator
Power/Volume + Button
Multifunction Button
Headphone Controls
HEADPHONE CONTROLS
04

ON/OFF
Turn on the headphones：
Press and hold the Power/Volume + Button until the LED
Indicator flashes blue.
*Audrey will say：“Welcome to Shokz”
Turn off the headphones：
Press and hold the Power/Volume + Button until the LED
Indicator flashes red.
*Audrey will say：“Power off”
Power/Volume + Button
ON/OFF
05

1. Start with OpenMove turned off.
2. Press and hold the Volume + Button until the LED Indicator
flashes red and blue alternately.
3.Open your device's Bluetooth settings and select " OpenMove
by Shokz." Audrey will say "connected."
Settings
BLUETOOTH
OpenMove by Shokz
Connected
Pairing
PAIRING
06

*Wearing your headphones the wrong way could cause
discomfort. The transducers should rest in front of your
ears.
Pick up the headphones, bring them
behind the back of the base of your neck,
position the earhooks on your ears, then
enjoy your music!
How to Wear
HOW TO WEAR
07

How to change volume:
While your audio is playing, adjust headphone volume by
pushing either the Volume + or Volume ‒buttons.
Operate volume controls
while audio is playing.
Volume
*Listening with headphones at high volume may affect your
hearing and the audio will be distorted.
*A “beep” will sound when the volume is at its max.
Power/Volume + Button
Volume - Button
VOLUME
08

Multifunction Button
Multifunction Button
Click once
End call
Click once
Answer call
Click once
Play/pause music
Double-click while music is playing
Next song
Triple-click while music is playing
Previous song
MULTIFUNCTION BUTTON
09

Multifunction Button
Press and hold for 2 seconds
when device is on standby
Double-click on standby
Activate voice assistant
Ignore a call
Redial last number
*Only applicable for phone calls, not online calls
Press and hold for 2 seconds
during an incoming call
MULTIFUNCTION BUTTON
Press and hold for 2 seconds
when receiving a second call
Answer call waiting and
end current call
Click once
Click once
Play music
Pause music
Next song
Previous song
Click once
Click once during a call
Double-click while music is playing
Triple-click while music is playing
Double-click while on pairingSwitch language
Answer call
End call
10

Operate controls while
audio is not playing
Check Battery Status
How to check battery status：
Click the Volume + or Volume - button while music is paused，
Audrey will tell you the battery status:
* "Battery high/Battery medium/Battery low/Charge me"
CHECK BATTERY STATUS
Power/Volume + Button
Volume - Button
11

Extra Features
12

EQ Modes
EQ MODES
Vocal Booster Mode：
Enhanced intermediate frequencies
for audiobooks, podcasts, etc.
Standard Mode：
Balanced frequency for listening to music
13

Switching EQ Modes
Operate controls while music
is playing
How to switch EQ mode：
Press and hold both buttons（Power/Volume + Button and Volume -
Button）while music is playing until you hear a beep.
*Audrey will say：“Standard Mode/Vocal Booster Mode.”
SWITCHING EQ MODES
Power/Volume + Button
Volume - Button
14

Switch between two devices
seamlessly with multipoint pairing
Pair Two Devices
Multipoint Pairing
MULTIPOINT PAIRING
15

Multipoint Pairing
Operate controls with
headphones powered off
1. Start with your headphones powered off.
2. Press and hold Volume + until Audrey will say “pairing”
and the LED indicator flashes red and blue alternately.
Audrey will say “pairing”
MULTIPOINT PAIRING
16

3.Press and hold the multifunction button and Volume +
button until Audrey say "multipoint enabled."
Power/Volume + Button
Multifunction Button
Audrey will say "multipoint enabled."
MULTIPOINT PAIRING
17

First Device
4.Open first device's Bluetooth® menu and select "OpenMove
by Shokz."Audrey will say "connected".
5.Turn your headphones off.
Settings
BLUETOOTH
OpenMove by Shokz
Connected
Audrey will say "connected".
MULTIPOINT PAIRING
18

Second Device
Bluetooth : turn on
OpenMove by Shokz
connected
6.Re-enter pairing mode by pressing and holding Volume +
until Audrey says “pairing”and the LED indicator flashes red
and blue alternately.
7.Open second device's Bluetooth® menu and select
"OpenMove by Shokz."Audrey will say "connected."
8.Turn your headphones off.
Audrey will say "connected".
MULTIPOINT PAIRING
19