Shop fox W1734 User manual

Model W1734
Downdraft Sanding Table
Introduction
The Model W1734 is intended for use with a dust
collection system or a Shop Vac®-style vacuum
with at least a 21⁄2" inlet size. Note—Inlet sizes
smaller than this will not allow the Model
W1734 to work as designed.
Specifications
• Table Size ..............................15" x 25"
• Dust Port Size .............................. 21⁄2"
• Minimum Dust Collector Inlet Size ...... 21⁄2"
• Overall Size ...............15" D x 25" L x 5" H
• Weight ......................................8 LBS
Connection
Connect your downdraft sanding table to your
dust collection system or Shop Vac®-style vac-
uum with a 21⁄2" dust hose and hose clamp, as
shown in Figure 2.
Operation
To use the downdraft table, simply start your
dust collector or Shop-Vac®-style vacuum and
sand your workpiece on the table, as shown in
Figure 3.
Cleaning
Your table surface may be cleaned with a damp
rag. If your table surface gets gummy from wood
pitch, you can use a non-corrosive blade cleaner
like Oxisolv® to easily remove it without harming
the tabletop surface. DO NOT clean with prod-
ucts that will harm the paint on the table surface
like brake parts cleaner, acetone, or gasoline.
Customer Service
For questions contact Woodstock International
Technical Support at [phone], or send e-mail
to: [e-mail].
Figure 1. Model W1734.
Figure 2. Dust port connected to dust
collection system.
Figure 3. Sanding on the downdraft table.
COPYRIGHT © MAY, 2004. BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS DOCUMENT MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#6297TR. REVISED OCTOBER, 2004. PRINTED IN CHINA.

















W1734 PARTS BREAKDOWN
REF PART# DESCRIPTION
1 XPFH12 FLAT HD SCR 1/4-20 X 1
2 X1734002 TABLETOP
3 X1734003 BASE
4 XPN05 HEX NUT 1/4-20
5 X1734005 DUST CHUTE
6 XPHTEK5M TAP SCREW M4.2 x 12
7 XPW06 FLAT WASHER 1/4"
REF PART# DESCRIPTION
8 X1734008 DUST PORT 2-1/2"
9 X1734009 BLIND RIVET
10 X1734010 FOOT PAD
11 X1733011 LABEL, SHOP FOX LOGO
12 X1734012 LABEL, MODEL NUMBER
14 X1734014 HANDLE