Showgear RCA-FSG-18 User manual

RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode:
□D7674 □D7675 □D7676 □D7677
USER MANUAL
ENGLISH
V1

1
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Preface
Thank you for purchasing this Showgear product.
The purpose of this user manual is to provide instructions for the correct and safe use of this product.
Keep the user manual for future reference as it is an integral part of the product. The user manual shall be
stored at an easily accessible location.
This user manual contains information concerning:
●Safety instructions
●Installation and operation of the product
●Intended and non-intended use of the product
●Maintenance procedures
●Troubleshooting
●Transport, storage and disposal of the product
Non-observance of the instructions in this user manual may result in serious injuries and damage of
property.
©2022 Showgear. All rights reserved.
No part of this document may be copied, published or otherwise reproduced without the prior written
consent of Highlite International.
Design and product specifications are subject to change without prior notice.
For the latest version of this document or other language versions, please visit our website
www.highlite.com or contact us at [e-mail].
Highlite International and its authorized service providers are not liable for any injury, damage, direct or
indirect loss, consequential or economic loss or any other loss arising from the use of, or inability to use or
reliance on the information contained in this document.

2
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Table of contents
1. Introduction..........................................................................................................................................................3
Before Using the Product ..................................................................................................................................3
Included Parts D7674 / D7675 / D7676 / D7677 ............................................................................................4
Included Items D7674 / D7675 / D7676 / D7677 ...........................................................................................6
Intended Use .......................................................................................................................................................7
Text Conventions ................................................................................................................................................7
Symbols and Signal Words................................................................................................................................7
Symbols on the Information Label ..................................................................................................................7
2. Safety ....................................................................................................................................................................8
Warnings and Safety Instructions ....................................................................................................................8
Requirements for the User.................................................................................................................................9
3. Description of the Product................................................................................................................................10
Front View ..........................................................................................................................................................10
Product Specifications ....................................................................................................................................11
Dimensions D7674.............................................................................................................................................12
Dimensions D7675.............................................................................................................................................13
Dimensions D7676.............................................................................................................................................14
Dimensions D7677.............................................................................................................................................15
4. Installation ..........................................................................................................................................................16
Safety Instructions for Installation ..................................................................................................................16
Installation Site Requirements ........................................................................................................................16
Tools for Assembling.........................................................................................................................................16
Assembling the Cabinet .................................................................................................................................17
Equipment Installation.....................................................................................................................................24
5. Maintenance .....................................................................................................................................................26
Preventive Maintenance................................................................................................................................26
Basic Cleaning Instructions ...................................................................................................................26
Corrective Maintenance................................................................................................................................26
6. Deinstallation, Transportation and Storage ....................................................................................................27
Instructions for Deinstallation..........................................................................................................................27
Instructions for Transportation ........................................................................................................................27
Storage...............................................................................................................................................................27
7. Disposal ..............................................................................................................................................................27

3
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
1. Introduction
Before Using the Product
Important
Read and follow the instructions in this user manual before installing, using or servicing this
product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your
Highlite International dealer.
Your shipment includes:
Showgear RCA-FSG-18 / RCA-FSG-22 /
RCA-FSG-32 / RCA-FSG-42
Parts, as shown on page 4 and 5
Screws, as shown on page 6
User manual
Fig. 01

4
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Included Parts D7674 / D7675 / D7676 / D7677
Image
Item
Name
D7674, D7675, D7676, D7677
A
Bottom plate
1 x
B
Frame
2 x
C
Top plate
1 x
D
Side panel
2 x
E
Mesh door
1 x

5
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Image
Item
Name
D7674, D7675, D7676, D7677
F
Glass door
1 x
G
Vertical
bracket
4 x
H
Horizontal
bracket
6 x
I
Metal plate
2 x
J
Adjustable
foot
4 x
K
Wheel
4 x

6
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Included Items D7674 / D7675 / D7676 / D7677
Image
Item
Name
D7674
D7675
D7676
D7677
L
Nut (M6)
(wrench 13)
16 x
16 x
16 x
16 x
M
Cage nut (M6)
20 x
20 x
20 x
40 x
N
Screw 8 x 12 mm
(hex 5)
16 x
16 x
16 x
16 x
O
Screw 6 x 12 mm
(T20)
20 x
20 x
20 x
40 x
P
Screw 5,5 x 10 mm
(T20)
100 x
100 x
104 x
120 x
Q
Ring
2 x
2 x
2 x
2 x
R
Set of keys
2 x
2 x
2 x
2 x
S
Hex key (T20)
1 x
1 x
1 x
1 x
T
Side panel screw
M5 x 6 mm
4 x
4 x
4 x
4 x
U
Self-tapping screw
M4 x 8 mm
8 x
8 x
8 x
8 x

7
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Intended Use
This product is intended for professional use as a server rack cabinet in theaters, entertainment facilities,
public venues, and similar. It is suitable only for indoor use. This product is not suitable for households.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Text Conventions
Throughout the user manual the following text conventions are used:
References: References to chapters and parts of the product are in bold lettering, for example:
“Refer to 2. Safety”, “turn the adjustment screw (02)”
0–255: Defines a range of values
Notes: Note: (in bold lettering) is followed by useful information or tips
Symbols and Signal Words
Safety notes and warnings are indicated throughout the user manual by safety signs.
Always follow the instructions provided in this user manual.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
Attention
Indicates important information for the correct operation and use of the
product.
Attention
Heavy object
Important
Read and observe the instructions in this document.
Symbols on the Information Label
This product is provided with an information label. The information label is located on the backside of the
product.
The information label contains the following symbols:
This product is designed for indoor use.
Read and follow the instructions in the user manual before installing, operating or
servicing the product.

8
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
2. Safety
Important
Read and follow the instructions in this user manual before installing, using or servicing this
product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual.
Warnings and Safety Instructions
DANGER
Danger for children
This product is not suitable for installation in locations where children are likely to be present.
●Do not leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within
children’s reach. Packaging material is a potential source of danger for children.
WARNING
Stability hazard
This product may fall or tip over, causing serious personal injury and material damage.
●Do not push the cabinet from the side panels to move it.
●When moving the cabinet on the wheels, push it from behind. Do not pull the cabinet towards you.
●Make sure that the cabinet is fully assembled and secured before you install equipment in the
cabinet.
●Do not exceed the maximum load capacity of the cabinet. Make sure that the cabinet can support
the total weight of all equipment installed.
●When you install equipment in the cabinet, start with the bottom of the cabinet. Put heavier
equipment at the bottom of the cabinet.
Attention
Heavy object
This product is heavy. Minimum two persons are necessary to assemble or to move the cabinet.
Attention
General safety
●Do not put any object on the cabinet.
●Do not stack the cabinets.
●Do not use the wheels to support the cabinet or to relocate the cabinet. The wheels are designed to
move the cabinet only over short distances.
●Make sure that there is sufficient space for ventilation around the cabinet.
●Do not block or cover the ventilation openings of the cabinet. Do not insert objects into the
ventilation openings of the cabinet.
●Keep the cabinet away from moisture, temperature extremes, flammable liquids and gasses,
conductive contaminants, dust and direct sunlight.

9
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Attention
For professional use only
This product shall be used only for the purposes it is designed for.
This product is intended for professional use as a server rack cabinet in theaters, entertainment facilities,
public venues, and similar. Any incorrect use may lead to hazardous situations and result in injuries and
material damage.
●This product is not suitable for households.
This product does not contain user-serviceable parts. Unauthorized modifications to the product will
render the warranty void. Such modifications may result in injuries and material damage.
Attention
Do not expose the product to conditions that exceed the rated IP class conditions.
This product is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater
than 12 mm, such as fingers, and no protection against harmful ingress of water.
Requirements for the User
This product may be used by ordinary persons. Assembling, installation, and maintenance shall be carried
out only by instructed or skilled persons. Contact your Highlite International dealer for more information.
Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled
person, for specific tasks and work activities associated with the installation, service and maintenance of
this product, so that they can identify risks and take precautions to avoid them.
Skilled persons have training or experience, which enables them to recognize risks and to avoid hazards
associated with the installation, service and maintenance of this product.
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons
include not only users of the product but also any other persons that may have access to the product or
who may be in the vicinity of the product.

10
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
3. Description of the Product
The Showgear RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 is a lockable 19-inch network
cabinet with an 18 rack / 22 rack / 32 rack / 42 rack unit height. It comes with both swivel wheels and
rubber feet. This network cabinet can be opened at every side since it has two detachable side panels
and a mesh door at the back and glass door at the front of the cabinet. This makes it easy to install and
install equipment.
The RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42 has a black, metal housing and comes with a
dedicated 19-inch rack installation kit, bolt & washer, cage nut, keys and screws.
Front View
Fig. 02
1 x Mesh door with key lock
M12 Adjustable feet
4 x Wheel
Side panel with locking mechanism
Ventilation openings
1 x Glass door with a key lock

11
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Product Specifications
Model:
RCA-FSG-18
RCA-FSG-22
RCA-FSG-32
RCA-FSG-42
Physical:
Rack units:
18 U
22 U
32 U
42 U
Inner rack
dimensions:
19” x 18 U (LxH)
19” x 22 U (LxH)
19” x 32 U (LxH)
19” x 42 U (LxH)
Dimensions:
827 x 604 x 1003 mm
(LxWxH)
827 x 604 x 1177 mm
(LxWxH)
827 x 604 x 1622 mm
(LxWxH)
827 x 604 x 2067 mm
(LxWxH)
Weight:
61 kg
70 kg
90 kg
112 kg
Maximum Load
750 kg
Product Properties:
Housing:
Metal
Color:
Black
IP rating:
IP20
Rack Rail Type:
Fixed
Wheels:
4 x 40 mm swivel wheels without brake
Feet:
Adjustable feet with rubber feet
Door:
1 x Mesh door with a key lock
1 x Glass door with a key lock
Side panel:
2 x Detachable side panel
Keys:
2 x Set of 2 keys

12
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Dimensions D7674
Fig. 03
Fig. 04
Fig. 05
Fig. 06

13
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Dimensions D7675
Fig. 07
Fig. 08
Fig. 09
Fig. 10

14
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Dimensions D7676
Fig. 11
Fig. 12
Fig. 13
Fig. 14

15
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Dimensions D7677
Fig. 15
Fig. 16
Fig. 17
Fig. 18

16
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
4. Installation
Safety Instructions for Installation
WARNING
Incorrect installation can cause serious injuries and damage of property.
Installation must be carried out only by instructed or skilled persons.
Installation Site Requirements
Attention
Make sure that there is enough space for ventilation around the cabinet.
●The cabinet must be installed only indoors.
●The cabinet must be placed on a flat leveled surface.
●Keep the cabinet away from moisture, temperature extremes, flammable liquids and gasses,
conductive contaminants, dust and direct sunlight.
Tools for Assembling
To assemble this cabinet, you need:
●Phillips screwdriver (PH1)
●Hex key (5 mm)
●Socket wrench (13)
●Water Level
●Torx T20

17
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Assembling the Cabinet
Attention
Heavy object
This product is heavy. Minimum two persons are necessary to assemble or to move the cabinet.
To assemble this cabinet follow the steps below:
Unpack all packages and carefully lay the parts out on the floor.
Put the 2 frames (B) on the bottom plate (A), as shown in Fig. 19.
Use a socket wrench and a hex key (S) to attach the 2 frames (B) to the bottom plate (A) with 8 nuts
(L) and 8 screws (N), as shown in Fig. 20.
Fig. 19
Fig. 20

18
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Carefully put the cabinet on its side, to make the execution of the following steps easier.
Use a hex key (S) to attach the 4 wheels (K) to the bottom of the bottom plate (A) with 4 x 4 screws
(O), as shown in Fig. 21.
Note:
After the wheel installation do not put the cabinet on its wheels, as shown in Fig 22.
Fig. 21
Fig. 22
Attach the adjustable feet (J) to the bottom of the bottom plate (A), by turning them clockwise, as
shown in Fig. 23.
Tighten the top nut of the adjustable feet (J) with a wrench, as shown in Fig. 24.
Fig. 23
Fig. 24

19
RCA-FSG-18 / RCA-FSG-22 / RCA-FSG-32 / RCA-FSG-42
Product code: D7674 / D7675 / D7676 / D7677
Make sure that the adjustable feet (J) are extended more than the wheels (K). If necessary, use a
wrench to turn the bottom nut of the adjustable feet (J) counterclockwise, as shown in Fig. 25. This
will prevent the cabinet from rolling on the wheels when you put it in upright position.
Put the cabinet in upright position.
Make sure that the cabinet is completely leveled in all directions, as shown in Fig. 26. Adjust the
adjustable feet (J) if necessary. See step 08.
Fig. 25
Fig. 26
Put the top plate (C) on top of the 2 frames (B), as shown in Fig. 27.
Attach the 4 corners of the top plate (C) to the 2 frames (B) with 4 x 2 screws (N), as shown in Fig. 28.
Fig. 27
Fig. 28