Siegenia DRIVE IO-Modul User manual

OPERATING INSTRUCTIONS
DRIVE
IO-Modul
IO-Modul smart
Comfort systems
Door systems
Window systems
IO module the concealed tilt sash locking drive
DRIVE CL

3/16
Operang instrucons for DRIVE CL
IO module/IO module smart
3/1609.2021H47.MOTS017EN-00
Content
1 INTRODUCTION.........................................4
1.1 Producer and service .................................... 4
  ............. 4
1.3 Intended use ................................................. 4
1.4 Improper use................................................. 4
1.5 Maintenance and service notes.................... 4
  ..... 4
1.7 Dimensions ................................................... 4
1.8 Symbols used ................................................ 4
  ........................ 4
1.10 Applicable documents................................... 5
1.11 Appropriate disposal..................................... 5
2 SAFETY.......................................................5
2.1 Structure of the warning notes..................... 5
2.2 Warning notes used ...................................... 5
2.3 Warning notes............................................... 5
3 FUNCTIONS................................................6
3.1 IO module ..................................................... 6
3.2 IO module smart ........................................... 6
4 CONNECTION DIAGRAM IO-MODUL
IO-MODUL SMART WITH DRIVE CL...........7
5 OPERATION................................................7
  .......................................... 7
  ........................................... 8
5.3 Menu structure IO module ........................... 9
 ..................................................... 10
5.4.1 Volume of the buzzer.................................. 10
  ....................... 10
 ...................... 11
 ...................... 11
5.4.5 Adjustment of switching mode
for Out 1 to 3............................................... 11
 ................................... 12
 ................................... 12
5.4.8 Device services............................................ 13
5.4.9 System services ........................................... 13
5.4.10 WIFI (only for IO module smart) ................. 14

for DRIVE CL Operang instrucons
IO module/IO module smart
09.20214/16 H47.MOTS017EN-00
1 Introducon

begin the assembly work. Observe the notes in Chapter
2 "Safety", in order to prevent personal injury or


point lock and must be accessible to the specialist

1.1 Producer and service
KFV Karl Fliether GmbH & Co. KG
A company of the SIEGENIA GROUP
Siemensstraße 10
42551 Velbert
Tel.: [phone]
Fax: [phone]
E-mail: [e-mail]
Please contact your contractual partner in case of

1.2 Target group of this documentaon

1.3 Intended use
• The IO module/IO module smart serves as an

DRIVE CL.
• The IO module/IO module smart is intended for
indoor use (IP20) with a room temperature of 0°C to

boxes or surface mounted in approved branch boxes.
• 

• Use the IO module/IO module smart only when it is

• Repair of the IO module/IO module smart is not
permissible. The IO module/IO module smart must
be replaced in case of faults.
1.4 Improper use
• The IO module smart must not be installed in a
metal casing, as this could lead to shielding of the
WIFI signal.
• The IO module/IO module smart must not be used
in event of air humidity > 80 %. The device is not
approved for use in swimming pools and/or wet

• The IO module/IO module smart and its connected
electromechanical components must not be

1.5 Maintenance and service notes
Never use cleaning agents that are aggressive or
contain solvents. This could damage the surfaces of the
components.
1.6 Installaon condions and requirements


1.7 Dimensions
All measurements are given in mm.
1.8 Symbols used
The following pictograms are used in this document:
general warning symbol


the corresponding point
The following symbols for the LEDs are used in this
document:

LED lights up


indicated colours
1.9 Other types of presentaons

their meanings:
• Items of text following this marker are found in lists.
– Items of text following this marker are found in
subordinate lists.
fItems of text with this marking in front of them are

order.
Cross reference
 
brackets.

5/16
Operang instrucons for DRIVE CL
IO module/IO module smart
5/1609.2021H47.MOTS017EN-00
1.10 Applicable documents



components.
1.11 Appropriate disposal
Electrical devices should not be disposed of as house-
hold waste. Bring the device, accessories and packaging
to an environmentally-friendly recycling facility.
2 Safety
• All work on the 230 V AC mains power supply
must be carried out in compliance with the current


• 

• 
• 
electronics.
2.1 Structure of the warning notes

• 
personal injury and material damage,
• classify the level of danger by the signal word,
• designate the danger of personal injury via the
hazard sign,
• 
• show measures to prevent danger and prohibit

The warning notes are set up according to the following
principle:
SIGNAL WORD
Type and source of danger

• 

of personal injury.



due to electric shock.



2.2 Warning notes used
DANGER
The signal word "Danger" designates an immediately
threatening danger. If this danger is not prevented, it
leads to death or severe injuries.
WARNING

danger. If this danger is not prevented, it could lead to
death or severe injuries.
CAUTION


prevented, it could lead to minor or moderate injuries.
NOTE


these notes prevents damage to the components.

This symbol indicates special features and designates

2.3 Warning notes
DANGER
Risk of fatal injury from electric shock
Exposed electrical components
• All work on a 230 V AC mains power supply may only be

If energy-carrying cables are routed in parallel to data
cables (ISDN, DSL, etc.), this could lead to interference e.
g. in the speed of the data transmission.

for DRIVE CL Operang instrucons
IO module/IO module smart
09.20216/16 H47.MOTS017EN-00
3 Funcons
3.1 IO module
• 
locking drive DRIVE CL
• 
• 
• 
• 
• 

3.2 IO module smart
• Extension of the WIFI-capable control for the

SIEGENIA Comfort app
(available free of charge from Google Play Store or
Apple App Store)
• 
locking drive DRIVE CL
• 
• 
• 
• 
• 
• 
• 
• 


7/16
Operang instrucons for DRIVE CL
IO module/IO module smart
7/1609.2021H47.MOTS017EN-00
4 Connecon diagram IO-ModulIO-Modul smart with DRIVE CL
Item name
1 DRIVE CL
2 IO-Modul/IO-Modul smart
3 Power supply
4
1
2
3
4
5 Operaon
5.1 Buons and LEDs


Item name
1
2 Menu LED
3 WIFI LED (only for IO module smart)


4 Status LED
4
1 2 3

for DRIVE CL Operang instrucons
IO module/IO module smart
09.20218/16 H47.MOTS017EN-00
5.2 Menu navigaon


9).
1. 
(menu LED lights up in 1 colour).
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
2. 

+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
3 s
3. 

+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
4. 
adjustment.
+24 V
–
1
2
3
4
5
6
7
8
9
10
Input 1
Input 2
Out 1
Out 2
Out 3
3 s
5. 

further input on the IO module follows.

9/16
Operang instrucons for DRIVE CL
IO module/IO module smart
9/1609.2021H47.MOTS017EN-00
5.3 Menu structure IO module
Volume of
the buzzer
Out 3 Device
services
System
services 1)
100 %  Restart the
device
Couple
devices
Level 2 Level 1
75 %  Default

Separate
devices
(50 %) (Funcon R) SW version Unblock ACS
25 %  Factory

0 %  WIFI on

Out 1
(Funcon P)


 
 
Out 2 Out 1–3
Switching mode
Input 1 Input 2 WIFI
 (Locking
bolt)
(Funcon 13) (Funcon 14) Reset WIFI
(Funcon Q) N/C contact 









WPS mode

Some menu items under „System services“ and „WIFI“ can only be carried with a WIFI-capable device that is integrated in the SI-BUS system. The

The "System services" menu can be retrieved up to 10 minutes following the system start. The "WIFI" menu can be retrieved up to 5 minutes
following the system start
The default values on delivery are displayed in bold italics in brackets (example: (50%)).

for DRIVE CL Operang instrucons
IO module/IO module smart
09.202110/16 H47.MOTS017EN-00
5.4 Funcons
5.4.1 Volume of the buzzer



LED colour in
level 1
Alternang LED colours
in level 2 value Descripon
Magenta
Magenta/
White 100 % The volume of the buzzer is set to 100 %.
 75 % The volume of the buzzer is set to 75 %.
Magenta/
Orange (50 %) The volume of the buzzer is set to 50 %.
Magenta/
Red 25 % The volume of the buzzer is set to 25 %.
Magenta/
 0 % The volume of the buzzer is set to 0 %.
5.4.2 Feedback funcon for Out 1
LED colour in
level 1
Alternang LED colours
in level 2 Funcon Feedback
yellow
Yellow/
White (P) 
  The window is closed and locked.
Yellow/
Orange R
Depending on the selected adjustment:
• Close WITH locking:
the window is closed and locked.
• Close WITHOUT locking:
the window is closed but not locked.
Yellow/Red S The window is unlocked and open.
Yellow/
 F