Siemens SIMATIC ET 200SP HA DQ 32x24VDC/0.5A HA User manual

SIMATIC
ET 200SP HA
Digital output module DQ
32x24VDC/0.5A HA
(6DL1132-6BL00-0PH1)
Manual
09/2018
A5E39265993-AA
Security information 1
Preface 2
Product overview 3
Wiring 4
Parameters 5
Displays and interrupts 6
Technical specifications 7
Drivers, parameters,
diagnostics messages and
address space A

Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will be
used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property
damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified
personnel are those who, based on their training and experience, are capable of identifying risks and avoiding
potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software described.
Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in
this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E39265993-AA
Ⓟ 10/2018 Subject to change
Copyright © Siemens AG 2018.
All rights reserved

Table of contents
1 Security information......................................................................................................................................5
2Preface.........................................................................................................................................................7
3Product overview..........................................................................................................................................9
3.1 Properties of the I/O module DQ 32x24VDC/0.5A HA.............................................................9
4Wiring.........................................................................................................................................................11
4.1 Pin assignment of the I/O module DQ 32x24VDC/0.5A HA (1-wire connector).....................11
4.2 Pin assignment of the I/O module DQ 32x24VDC/0.5A HA (2-wire connector).....................13
4.3 Schematic circuit diagram......................................................................................................14
4.4 Pulling I/O module in runtime / output disable switch activated.............................................15
5 Parameters.................................................................................................................................................17
5.1 Parameters of the I/O module DQ 32x24VDC/0.5A HA.........................................................17
5.2 Module/channel parameters...................................................................................................18
5.3 Explanation of the module/channel parameters.....................................................................19
6 Displays and interrupts...............................................................................................................................21
6.1 Status and error displays of the I/O module DQ 32x24VDC/0.5A HA....................................21
6.2 Interrupts................................................................................................................................24
7 Technical specifications..............................................................................................................................25
A Drivers, parameters, diagnostics messages and address space...............................................................29
A.1 Concept of the driver and diagnostics blocks.........................................................................29
A.2 Parameters, diagnostics messages and address space without PCS 7................................31
A.2.1 Parameter assignment...........................................................................................................31
A.2.2 Parameter assignment and structure of the module/channel parameters.............................32
A.2.3 Diagnostics messages and maintenance events...................................................................34
A.2.4 Address space.......................................................................................................................35
Index...........................................................................................................................................................37
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
Manual, 09/2018, A5E39265993-AA 3

Table of contents
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
4Manual, 09/2018, A5E39265993-AA

Security information 1
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines, and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines and
networks. Systems, machines and components should only be connected to the enterprise
network or the internet if and to the extent necessary and with appropriate security measures
(e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens’ guidance on appropriate security measures should be taken into
account. You can find more information about industrial security by visiting:
https://www.siemens.com/industrialsecurity.
Siemens’ products and solutions undergo continuous development to make them more secure.
Siemens strongly recommends you apply product updates as soon as available and always
use the latest product versions. Use of product versions that are no longer supported, and
failure to apply latest updates may increase customer’s exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under
https://www.siemens.com/industrialsecurity.
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
Manual, 09/2018, A5E39265993-AA 5

Security information
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
6Manual, 09/2018, A5E39265993-AA

Preface 2
Validity of the documentation
This manual describes the following I/O module:
System family I/O module Article number
SIMATIC;
Distributed I/O System;
ET 200SP HA
DQ 32x24VDC/0.5A HA 6DL1132-6BL00-0PH1
It supplements the ET 200SP HA Distributed I/O system system manual.
Functions that generally relate to the system are described in this manual.
The information in this device manual and the system/function manuals enables you to put the
ET 200SP HA into operation.
Configuring the ET 200SP HA
You can configure the following components of the ET 200SP HA when the following updates
are installed:
Component of the ET 200SP HA Required updates
DQ 32x24VDC/0.5A HA HSP0276 V02.00.00
Appendices
The appendices provide information that is relevant for using the ET 200SP HA outside the
PCS 7 environment.
Conventions
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product or on the section of the documentation to which particular attention
should be paid.
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
Manual, 09/2018, A5E39265993-AA 7

Preface
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
8Manual, 09/2018, A5E39265993-AA

Product overview 3
3.1 Properties of the I/O module DQ 32x24VDC/0.5A HA
View of the module
DIAG MT

DQ HA
32x24V DC/0, 5 A
7
DQ . 6 +
8
1
DQ . 0 +
2
3
DQ . 2+
4
5
DQ . 4 +
6
1P1
L+
24VDC
M
1P2
2P1
L+
24VDC
M
2P2
MAX. 10 A
V 1.0.0
CC 00
PW R
6DL1132-6BL00-0PH1
X 2
3 4
DQ . 7+
DQ .1+
DQ . 3 +
DQ . 5 +
DQ a
15
DQ . 6 +
16
9
DQ . 0 +
10
11
DQ . 2+
12
13
DQ . 4 +
14
DQ . 7+
DQ.1+
DQ . 3 +
DQ . 5 +
DQ b
2324
17 18
19 2 0
2122
31
25
27
29
32
26
28
30

DQ . 6 +
DQ . 0 +
DQ . 2+
DQ . 4 +
DQ . 7+
DQ.1+
DQ . 3 +
DQ . 5 +
DQ c
DQ . 6 +
DQ . 0 +
DQ . 2+
DQ . 4 +
DQ . 7+
DQ.1+
DQ . 3 +
DQ . 5 +
DQ d

.0 .1
.2 .3
.4 .5
.6 .7
DQ a

.0 .1
.2 . 3
.4 .5
.6 .7
DQ b
.0 .1
.2 . 3
.4 .5
.6 .7
DQ c
.0 .1
.2 . 3
.4 .5
.6 .7
DQ d
①Module type and designation ⑧Output disable switch
②LED for diagnostics ⑨Module type color coding
③LED for maintenance ⑩Product version
④2D matrix code ⑪Function status and firmware version
⑤Wiring diagram ⑫Color code for selection of the color-coded labels
⑥LEDs for channel status ⑬Serial number
⑦LED for supply voltage ⑭Article number
Figure 3-1 View of the DQ 32×24VDC/0.5A HA
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
Manual, 09/2018, A5E39265993-AA 9

Properties
The I/O module has the following technical properties:
● 32 digital outputs with the following properties that can be individually configured for each
channel
– Diagnostics
– Substitute values
● Source output (PNP, switching to P potential)
● Module-specific configurable diagnostics for missing supply voltage L+
● Output current (Total current of all channels: Max. 10 A; single channel: Max. 0.5 A)
● Suitable for solenoid valves, DC contactors, and indicator lights
The I/O module supports the following functions:
● Firmware update
● I&M identification data
● Parameter reassignment in RUN
● Value status QI
You can configure the I/O module with HW Config and integrate it into your system.
Output disable switch
If you want to pull the I/O module in runtime, you have to press the output disable switch for
3 seconds for the I/O module to be deenergized.
When the output disable switch has been pressed for 3 seconds, the LED DIAG flashes red,
the LED MT lights up yellow and the I/O module generates a diagnostics message. See section
Status and error displays of the I/O module DQ 32x24VDC/0.5A HA (Page 21).
Note
Pressing the output disable switch interrupts any ongoing firmware update. A firmware update
cannot be performed when the device is deenergized.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color-coded labels
● Reference identification label
● Shield connector
Product overview
3.1 Properties of the I/O module DQ 32x24VDC/0.5A HA
Digital output module DQ 32x24VDC/0.5A HA (6DL1132-6BL00-0PH1)
10 Manual, 09/2018, A5E39265993-AA