Siemens WM SERIES Specification sheet

Register
your
product
online
e
ns-home.com/welcome
siemens-home.bsh-group.com/welcome
en ,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV
Washing machine
WM...

2
Your new washing machine
You have chosen a Siemens washing
machine.
Please take a few minutes to read and
become familiar with the advantages of
your washing machine.
To meet the high quality demands
required by Siemens, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.siemens-
home.bsh-group.com or contact our
after-sales service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washing machine.
Display rules
:Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■/ -
Lists are represented by a small box or
a dash.

en
3
Contents enInstruction Manual and Installation Instructions
8Intended use. . . . . . . . . . . . . . . . .4
(Safety instructions . . . . . . . . . . .5
Electrical safety. . . . . . . . . . . . . . . . . . 5
Risk of injury . . . . . . . . . . . . . . . . . . . . 5
Safety for children. . . . . . . . . . . . . . . . 5
7Environmental protection . . . . . .6
Packaging/used appliance . . . . . . . . . 6
Tips on economical use . . . . . . . . . . . 6
*Getting to know the
appliance . . . . . . . . . . . . . . . . . . .7
Washing machine . . . . . . . . . . . . . . . . 7
Control panel . . . . . . . . . . . . . . . . . . . 8
Display panel . . . . . . . . . . . . . . . . . . . 8
ZLaundry. . . . . . . . . . . . . . . . . . . . .9
Prepare the laundry . . . . . . . . . . . . . . 9
Sorting laundry . . . . . . . . . . . . . . . . . . 9
Starching . . . . . . . . . . . . . . . . . . . . . 10
Dyeing/bleaching . . . . . . . . . . . . . . . 10
Soaking . . . . . . . . . . . . . . . . . . . . . . 10
CDetergent . . . . . . . . . . . . . . . . . .10
Correct selection of detergent . . . . . 10
Saving energy and detergent . . . . . . 11
0Programme default settings . . .11
Spin speed . . . . . . . . . . . . . . . . . . . . 11
Ready in time . . . . . . . . . . . . . . . . . . 11
\Additional programme
settings . . . . . . . . . . . . . . . . . . . .12
Speed Perfect (. . . . . . . . . . . . . . . 12
Eco Perfect ¦. . . . . . . . . . . . . . . . . . 12
Extra Rinse . . . . . . . . . . . . . . . . . . . . 12
Water Plus . . . . . . . . . . . . . . . . . . . . 12
Anti-crease . . . . . . . . . . . . . . . . . . . . 12
1Operating the appliance . . . . . . 13
Preparing the washing machine . . . .13
Select programme/switch on the
appliance. . . . . . . . . . . . . . . . . . . . . .13
Change the programme default
settings . . . . . . . . . . . . . . . . . . . . . . .13
Placing laundry into the drum . . . . . .13
Measure and add detergent and
care products . . . . . . . . . . . . . . . . . .14
Start the programme . . . . . . . . . . . . .15
Childproof lock . . . . . . . . . . . . . . . . .15
Adding laundry . . . . . . . . . . . . . . . . .15
Changing the programme . . . . . . . . .16
Cancel the programme . . . . . . . . . . .16
Programme end . . . . . . . . . . . . . . . .16
Removing laundry/switching off
the appliance. . . . . . . . . . . . . . . . . . .16
HSensors . . . . . . . . . . . . . . . . . . . 17
Automatic load sensing. . . . . . . . . . .17
Unbalanced load detection system . .17
MSetting the signal . . . . . . . . . . . 18
2Cleaning and maintenance. . . . 19
Machine housing/control panel . . . . .19
Drum . . . . . . . . . . . . . . . . . . . . . . . . .19
Descaling . . . . . . . . . . . . . . . . . . . . .19
Detergent drawer and housing . . . . .19
Detergent solution pump blocked . . .19
The drain hose at the siphon is
blocked . . . . . . . . . . . . . . . . . . . . . . .20
Filter in the water supply blocked . . .21
3Faults and what to do about
them. . . . . . . . . . . . . . . . . . . . . . 21
Emergency release . . . . . . . . . . . . . .21
Information on the display panel . . . .22
Faults and what to do about them. . .22

en Intended use
4
4After-sales service . . . . . . . . . . 24
JTechnical data . . . . . . . . . . . . . . 24
5Positioning and connecting. . . 25
Included with the appliance . . . . . . . 25
Safety instructions . . . . . . . . . . . . . . 25
Installation surface. . . . . . . . . . . . . . 26
Installation on a base or a wooden
joist floor . . . . . . . . . . . . . . . . . . . . . 26
Installation on a platform with
drawer . . . . . . . . . . . . . . . . . . . . . . . 26
Installing the appliance in a
kitchenette . . . . . . . . . . . . . . . . . . . . 26
Removing the transport locks . . . . . 26
Hose and cable lengths. . . . . . . . . . 27
Water inlet . . . . . . . . . . . . . . . . . . . . 27
Water outlet . . . . . . . . . . . . . . . . . . . 29
Levelling . . . . . . . . . . . . . . . . . . . . . 30
Electrical connection . . . . . . . . . . . . 30
Before washing for the first time . . . 31
Transportation . . . . . . . . . . . . . . . . . 31
8Intended use
Intendeduse ■For private domestic use only.
■The washing machine is suitable for
washing machine-washable fabrics
and hand-washable wool in water
containing detergent.
■To be operated with cold* mains
water or cold and hot* mains water
(max. 60 °C), and standard
detergents and care products which
are suitable for use in washing
machines.
■When measuring out the amount of
all detergents, additives, care
products and cleaning agents,
always follow the manufacturer's
instructions.
■The washing machine may be used
by children over the age of 8 years
and by persons with reduced
physical, sensory or mental capacity
or by persons with a lack of
experience or knowledge if they are
supervised or have been instructed
by a responsible person.
Children must not carry out any
cleaning or maintenance work
without supervision.
■This appliance is intended for use up
to a maximum height of
4000 metres above sea level.
■Keep children under the age of
3 years away from the washing
machine.
■Keep pets away from the washing
machine.
Read the Instruction Manual and
Installation Instructions and all other
information supplied with the washing
machine and use the machine
accordingly.
Retain the documents for subsequent
use.
* depending on the model

Safety instructions en
5
(Safety instructions
Safetyinstructions Electrical safety
:Warning
Danger of death!
There is a risk of electric shock
if you touch live components.
■Never touch or hold the
mains plug with wet hands.
■Only pull out the mains cable
by the plug and never by the
cable, as this could damage
it.
Risk of injury
:Warning
Risk of injury!
■When the washing machine
is lifted by its protruding
parts (e.g. the washing
machine door), the
components may break off
and cause injuries.
Do not lift the washing
machine by protruding parts.
■If you climb on the washing
machine, the worktop may
break and cause injuries.
Do not climb onto the
washing machine.
■If you lean on the washing
machine door when it is
open, the washing machine
may tip over and cause
injuries.
Do not lean on the washing
machine door when it is
open.
■Reaching into the drum
when it is turning can cause
injuries to hands.
Do not reach into the drum
when it is turning.
Wait until the drum has
stopped turning.
:Warning
Risk of scalding!
When you are washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot water e.g. if hot
water is being drained into a
wash basin.
Do not reach into the hot
detergent solution.
Safety for children
:Warning
Danger of death!
If children play with the washing
machine, they may get into life-
threatening situations or injure
themselves.
■Do not leave children
unattended near the washing
machine.
■Do not let children play with
the washing machine.
:Warning
Danger of death!
Children may lock themselves
in appliances, putting their lives
at risk.
For appliances that have
reached the end of their service
life:
■Disconnect the mains plug.

en Environmental protection
6
■Cut through the mains cable
and remove it, along with
plug.
■Destroy the lock on the
washing machine door.
:Warning
Risk of suffocation!
Children may become wrapped
in packaging/film or packing
parts if allowed to play with
them, or they may pull them
over their heads and suffocate.
Keep packaging, film and
packaging parts out of the
reach of children.
:Warning
Risk of poisoning!
Detergents and care products
may be poisonous if
consumed.
Keep detergents and care
products out of the reach of
children.
:Warning
Eye/skin irritation!
Detergents and care products
may cause irritation if they
come into contact with the eyes
or skin.
Keep detergents and care
products out of the reach of
children.
:Warning
Risk of injury!
When you wash at high
temperatures, the glass in the
washing machine door gets
hot.
Do not let children touch the
hot washing machine door.
7Environmental
protection
Environmentalprotection Packaging/used appliance
Tips on economical use
■Always fill the appliance with the
maximum amount of laundry for
each programme.
Overview of programmes ~:
Supplementary sheet for the
operating and installation
instructions.
■Wash normally soiled laundry
without a prewash.
■The selectable temperatures apply
to the care labels on the textiles. The
temperatures in the machine may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
■Energy-saving mode: The display
panel light goes out after several
minutes, Start button flashes. To
activate the light, press any button.
Energy-saving mode is not activated
if a programme is running.
■If the laundry is subsequently dried
in a tumble dryer, select the spin
speed according to the tumble dryer
manufacturer's instructions.
)Dispose of packaging in an
environmentally-responsible
manner.
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines the
framework for the return and
recycling of used appliances
as applicable throughout the
EU.

Getting to know the appliance en
7
*Getting to know the appliance
Gettingtoknowtheappliance Washing machine



#
6 7
(Detergent drawer 9S Open the washing machine door
0Control/display panel 9T Close the washing machine door
8Washing machine door with
handle
@Service flap with or without a drainage hose*
* Depending on the model

en Getting to know the appliance
8
Control panel
Note: You can find possible programme default settings and additional programme
settings in the overview; these differ depending on the model.
Display panel
Note: The table shows possible setting options and information in the display panel;
these differ depending on the model.


 # +
(Programme selector for selecting a
programme and switching the machine on and off
via the "Off" position.
@Additional programme settings : Speed
Perfect (, Eco Perfect ¦, Anti-Crease, Water
Plus or Extra Rinse. Selecting additional
programme settings ~Page 12.
0Display panel for settings and information. HStart button for starting, interrupting (e.g. to
reload laundry) and cancelling a programme.
8Programme default settings: Spin speed
and "Ready in" time. Changing the programme
default settings ~Page 11.
Setting options and information for the selected programme
2... 1400 0Spin speed in rpm (revolutions per minute);
2= without final spin
1:30 Programme duration Depends on the programme selection in h:min
(hours:minutes)
1 - 24 h Ready in time Programme ends after ... h (h = hours)
8.0 kg Max. load in kg (kilograms)
Symbols for the programme sequence and information
9'0- ‹ - : Wash, rinse, spin, programme duration or end.
²»: Childproof lock .

Laundry en
9
ZLaundry
Laundry Prepare the laundry
Caution!
Damage to the appliance/fabrics
Foreign objects (e.g. coins, paperclips,
needles, nails) may damage the laundry
or components in the washing machine.
You should therefore note the following
tips when preparing your laundry:
■Empty any pockets.
■Look out for metal items (paperclips,
etc.) and remove them.
■Wash delicates in a laundry bag
(tights, underwired bras, etc.).
■Close any zips; button up any cover
buttons.
■Brush sand out of pockets and
collars.
■Remove curtain fittings or place
curtains in a laundry bag.
Sorting laundry
Sort your laundry according to the care
instructions and manufacturer's
information on the care labels,
depending on:
■Type of fabric/fibre.
■Colour:
Note: Laundry may discolour or not
be cleaned correctly. Wash white
and coloured items separately.
Wash new bright fabrics separately
the first time you wash them.
■Soiling:
Wash laundry with the same level of
soiling together.
Examples of levels of soiling:
–Light: Do not prewash; if
necessary, select the additional
programme setting
SpeedPerfect G.
–Normal
–Heavy: Load less laundry, select
a programme with prewash
–Stains: Remove/pretreat stains
while they are fresh. First, dab the
stain with soapy water/do not
rub. Then wash the items of
laundry with the appropriate
programme. Stubborn or dried-in
stains can sometimes only be
removed by washing several
times.
■Symbols on the care labels:
The numbers in the symbols indicate
the maximum washing temperature
that may be used.
–M: Suitable for a normal
washing process; e.g. Cottons
programme.
–U: A gentle washing process is
required; e.g. Easy-Care
programme.
–V: An especially gentle washing
process is required; e.g.
Delicate/Silk programme
–W: Suitable for washing by
hand; e.g. W Wool programme.
–Ž: Do not wash the laundry in
the machine.

en Detergent
10
Starching
Note: Laundry should not be treated
with fabric softener.
Liquid starch can be used to stiffen
fabrics particularly in the Rinse and
Cottons programmes. Measure starch
into compartment Min accordance with
the manufacturer's instructions (clean
first if necessary).
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
Soaking
1. Pour soaking agent/detergent into
compartment II according
to the manufacturer’s instructions.
2. Turn the programme selector to the
Cottons 30 °C programme.
3. Press the start button.
4. After approx. 10 minutes, press the
start button again to pause the
programme.
5. After the required soaking time,
press the start button again, if the
programme is to be continued or
changed.
Notes
■Load laundry of the same colour.
■No additional detergent is required;
the soaking solution is used for
washing.
CDetergent
Detergent Correct selection of detergent
The care label is crucial for selecting
the correct detergent, temperature and
treatment of the laundry. ~ See also
www.sartex.ch
Visit www.cleanright.eu to find further
information on detergents, care
products and cleaning agents for
domestic use.
■Standard detergent with optical
brighteners
Suitable for heat-resistant white
laundry made from linen or cotton.
Select the Cottons / cold - max.
90 °C programme.
■Detergent for colours without
bleach or optical brighteners
Suitable for coloured laundry made
from linen or cotton.
Select the Cottons / cold - max.
60 °C programme.
■Detergent for colours/delicates
without optical brighteners
Suitable for coloured laundry made
from easy-care fibres, synthetic
fibres.
Select the Easy-Care / cold - max.
60 °C programme.
■Mild detergent
Suitable for delicate, fine fabrics, silk
or viscose.
Select the Delicate/Silk / cold - max.
40 °C programme.
■Detergent for woollens
Suitable for woollen fabrics.
Select the Wool / cold - max.
40 °Cprogramme.

Programme default settings en
11
Saving energy and detergent
For light and normal soiling, you can
save energy (lower washing
temperature) and detergent.
Note: When measuring the amount of
all detergents/additives/care products
and cleaning agents, please always
check the manufacturer's instructions
and information. ~Page 14
0Programme default
settings
Programmedefaultsettings Note: You can find possible
programme default settings in the
overview; these differ depending on the
model.
The programme default settings for all
programmes are preset at the factory
and are displayed in the display panel
after the programme is selected.
Spin speed
(0)
Depending on the programme
progress, you can change the spin
speed (in rpm; revolutions per minute)
before and during the programme.
To do this, press the spin speed button
repeatedly until the required spin speed
is displayed in the display panel. The
maximum speed that can be selected
depends on the model and programme
that has been selected.
Setting 2: Rinse hold = without final
spin. The laundry remains in the water
after the final rinse to prevent creasing if
the laundry will not be taken out of the
washing machine immediately.
Ready in time
(0)
Before starting the programme, the
programme end Ready in time can be
preselected in hourly increments (h =
hours) up to a maximum of 24 hours.
1. Select the required programme.
Note: The programme duration is
displayed in the display panel.
2. Press the Ready in button repeatedly
until the required number of hours is
displayed in the display panel.
Saving Soiling/note
Reduced temper-
ature and deter-
gent quantity as
per the recom-
mended dosage
Light
No visible dirt or stains. Cloth-
ing has taken on some body
odour, e.g.:
■Light summer/sports
clothing (worn for a few
hours)
■T-shirts, shirts, blouses
(worn for up to one day)
■Guest bed linen and hand
towels (used for one day)
Normal
Visible dirt or a few light
stains, e.g.:
■T-shirts, shirts, blouses
(sweat soaked, worn a
few times)
■Towels, bedding (used for
up to one week)
Temperature as
per the care label
and detergent
quantity as per
the recom-
mended dosage
for heavy soiling
Heavy
Dirt and/or stains clearly visi-
ble, e.g. tea towels, baby
items, work clothing

en Additional programme settings
12
3. Press the Start button.
The set Ready in time is now active. The
selected programme starts
automatically and ends after the
selected number of hours.
After the programme has started, the
programme duration, e.g. 2:30
(hours:minutes) is displayed in the
display panel.
Adding laundry after the "Ready in"
time is active:
1. Press the Start button.
2. YES lights up in the display panel.
The washing machine door can be
opened and laundry can be added.
3. Close the washing machine door.
4. Press the Start button again. The
preselected time continues to run.
\Additional programme
settings
Additionalprogrammesettings Note: You can find possible additional
programme settings in the overview;
these differ depending on the model.
Speed Perfect (
((speed Perfect)
Washes in a shorter time but with a
washing outcome comparable to that of
the programme without selecting the
additional ( speed Perfect programme
setting.
Note: Do not exceed the maximum
load for the programme. See the
supplementary sheet for the operating
and installation instructions; programme
overview.
Eco Perfect ¦
(¦eco Perfect, Eco ü)
Energy-optimised washing by reducing
the temperature while achieving
washing result that is consistent with the
standard program.
Note: The washing temperature is
lower than the selected temperature.
The Allergy/Hygiene/Sensitive program
is recommended for washes with
particularly high hygienic requirements.
If you do not have an Allergy/Hygiene/
Sensitive program on the program
selector, select a higher temperature or
select the additional preset
speed Perfect Gprogram.
Extra Rinse
(Extra Rinse; Rinse plus; extra l)
Extra rinse. For areas with very soft
water or for an even better rinsing
result.
Water Plus
(9)
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for an even
better rinsing result.
Anti-crease
(Anti-Crease; menos S)
For gentle final spin with subsequent
fluffing. Residual moisture in the laundry
is slightly increased.

Operating the appliance en
13
1Operating the
appliance
Operatingtheappliance Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~Page 25.
1. Plug in the mains plug.
2. Turn the tap on.
3. Open the washing machine door.
4. Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note: If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
~Page 15.
Use the programme selector to select
the required programme. Can be
rotated in either direction.
The appliance is switched on.
The programme default settings and
loading information for the selected
programme appear in the display panel:
■The programme duration,
■The preset spin speed and
■The maximum load.
Change the programme
default settings
You can change the programme default
settings:
To do this, repeatedly press the
required button for the programme
default settings until the required setting
is displayed in the display panel. Then
press the "Start" button to start the
programme.
The programme default settings are not
saved when the appliance is switched
off.
Programme default settings
~Page 11.
Placing laundry into the drum
:Warning
Risk of death!
Items of laundry pretreated with
cleaning agents that contain solvents,
e.g. stain remover/cleaning solvent,
may cause an explosion after being
loaded into the washing machine.
Hand-rinse these items of laundry
thoroughly beforehand.
Notes
■Mix items of laundry of varying sizes.
Laundry items of different sizes
distribute themselves better during
the spin cycle. Individual items of
laundry may lead to imbalances.
■Observe the maximum specified
load. Overfilling has a negative
impact on the washing result and
promotes creasing.
1. Unfold presorted items of laundry
before placing them in the washing
drum.

en Operating the appliance
14
2. Make sure that no items of laundry
are trapped between the washing
machine door and the rubber seal,
and close the door.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Measuring
Dose the detergents and care products
according to:
■Water hardness. Ask your water
supply company.
■The manufacturer’s specifications on
the packaging.
■The amount of laundry.
■Soiling ~Page 9.
Filling
:Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Note: Dilute viscous fabric softener and
fabric conditioner with water; this
prevents blockages.
Pour the detergent and care products
into the appropriate compartments:
1. Pull out the detergent drawer as far
as possible.
2. Add detergent and/or care products.
3. Close the detergent drawer.
Measuring aid* for liquid detergent
*Depending on the model
Position the measuring aid for
measuring liquid detergent:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. Slide the measuring aid forwards,
fold it down and click it into place.
Measuring aid* AFor liquid detergent
Compartment II Detergent for the main wash,
water softener, bleach, stain
remover
Compartment iSoftener, starch,
do not exceed the maximum
Compartment IDetergent for prewash

Operating the appliance en
15
3. Reinsert the drawer.
Note: Do not use the measuring aid for
gel detergents and washing powder, or
for programmes with prewash or when
the Ready in time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Start the programme
Press the Start button to start the
programme.
During the programme, the display
panel shows the Ready in time or, after
starting the wash programme, the
programme duration and the symbols
for the programme progress.
Display panel ~Page 8.
Note: To secure the programme
against being inadvertently adjusted,
select the childproof lock.
Childproof lock
Prevent the set functions of the washing
machine from being accidentally
changed by activating the childproof
lock when the programme has started.
To activate the childproof lock, press
and hold the "Start" button for approx.
five seconds. ²» appears in the display
panel and then goes out again after a
few seconds.
To deactivate the childproof lock, press
and hold the "Start" button for approx.
five seconds.
Notes
■²» lights up: The childproof lock is
active and the programme selector
has been adjusted. To prevent the
programme from stopping, turn the
programme selector back to the
original programme.
■The childproof lock remains active
after the programme has ended and
the appliance is switched off. You
must always deactivate the
childproof lock if you want to start a
new programme.
Adding laundry
After starting the programme, you can
add or remove laundry:
1. Press the "Start" button to pause the
programme.
The "Start" button indicator lamp
flashes and the machine checks
whether it is possible to add laundry.
Note: Do not leave the washing
machine door open for too long
when adding laundry as water from
the laundry may leak out.
If the following appears in the display
panel:
–YES lights up, it is possible to
add laundry.
–NO flashes, wait until YES lights
up.
Only open the washing machine
door if YES is lit up.
–NO lights up, it is not possible to
add laundry.
For safety reasons, the washing
machine door remains locked
when the water level or
temperature is high, or while the
drum is rotating, and it is not
possible to add laundry during
this time.
2. To continue the programme, press
the "Start" button again.

en Operating the appliance
16
Changing the programme
1. Press the Start button to pause the
programme.
2. Select a different programme.
3. Press the Start button again. The
new programme starts from the
beginning.
Cancel the programme
1. Press the Start button to cancel the
programme.
2. To cool the laundry: Set the
programme to Rinse.
3. Press the Start button again. The
rinse programme starts.
After the programme has ended, you
can remove the laundry.
Programme end
‹appears in the display panel and the
start button indicator lamp is off.
If the 9symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and automatically
switched on a rinse cycle to remove the
foam.
Note: Add less detergent for the next
washing cycle with the same load.
Removing laundry/switching
off the appliance
1. Open the washing machine door
and remove the laundry.
Notes
– If you cannot open the washing
machine door, the appliance is
still locked. Wait until the
programme ends.
– If the display panel does not light
up, energy-saving mode is active.
To activate, select any button.
2. Set the programme selector to the
Off position. The appliance is
switched off.
3. Turn off the tap.
Note: Not required for Aqua-Stop
models.
Notes
■Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■Remove any foreign objects from the
drum and the rubber seal – risk of
rusting.
■Leave the washing machine door
and detergent drawer open so that
any residual water can dry away.

Sensors en
17
HSensors
Sensors Automatic load sensing
The automatic load sensing function
adapts the water consumption ideally to
each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the speed is reduced or the
spin cycle is not performed for safety
reasons.
Note: Place large and small items of
laundry evenly in the drum. ~Page 22

en Setting the signal
18
MSetting the signal
Settingthesignal
1. Set the button and information signals
Set the programme selector to the "Off" position
and then turn the dial one position to the right.
Press the button for Eco Perfect ¦, hold it down
and, at the same time, turn the programme
selector one further position to the right.
2. Set the volume for button signals
The current signal volume now appears.
Press the spin speed button repeatedly until
the required signal volume is set.
Go to point 3to set the vol-
ume for the information sig-
nals, or
Set the programme selector
to the "Off" position to exit the
menu.
3. Set the volume for the information signals
Turn the programme selector
one further position.
Press the spin speed button
repeatedly until the required infor-
mation signal volume is reached.
Set the programme selector to the
"Off" position to exit the menu.

Cleaning and maintenance en
19
2Cleaning and
maintenance
Cleaningandmaintenance :Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and unplug the
mains plug.
:Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
■Wipe the housing and the control
panel with a soft, damp cloth.
■Remove the detergent residue
immediately.
■Do not clean with a water jet.
Drum
Use chlorine-free cleaning agents and
not steel wool.
Descaling
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
after-sales service.
Detergent drawer and housing
If the washing machine contains
detergent or fabric softener residues:
1. Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
2. To remove the insert: Push the insert
upwards from below with your finger.
3. Clean the detergent dispenser tray
and insert with water and a brush,
and dry it. Clean the inside of the
housing as well.
4. Fit the insert and lock it in place
(push the cylinder onto the guide
pin).
5. Push in the detergent drawer.
Note: Leave the detergent drawer open
so that any residual water can
evaporate.
Detergent solution pump
blocked
:Warning
Risk of scalding!
Washing water is hot when washing at
high temperatures. If you come into
contact with the hot detergent solution,
you may be scalded.
Allow the detergent solution to cool
down.
1. Turn off the water tap so that no
more water can flow in and has to be
drained via the detergent solution
pump.

en Cleaning and maintenance
20
2. Switch off the appliance and pull out
the mains plug.
3. Open and remove the service flap.
4. Fold out the water gutter in front of
the pump cover.
5.
– Remove the drainage hose from
its holder and remove the sealing
cap.
Allow the detergent solution to
flow out into a suitable container.
Replace the sealing cap on the
drainage hose and place the
drainage hose back in the
retainer.
–Without the drainage hose
Carefully turn the pump cover
once through 180°, but do not
remove it. The water now runs out
of the detergent solution pump.
Repeat the process until no more
detergent solution flows out.
6. Now carefully unscrew the pump
cover. Residual water may run out.
Clean the interior, pump cover
thread and pump housing. The
impeller in the detergent solution
pump must be able to rotate.
Refit the pump cover and screw it on
tightly. The handle should be vertical.
7. Fold in the water gutter.
8. Place the service flap back on, lock
it into place, and close it.
Note: To prevent unused detergent
from flowing straight into the drain
during the next wash: Pour 2 litre of
water into compartment II and start the
Empty programme.
The drain hose at the siphon
is blocked
1. Switch off the appliance. Disconnect
the mains plug.
2. Loosen the hose clamp. Carefully
remove the drain hose, residual
water may leak out.
3. Clean the drainage hose and siphon
connecting piece.