Siemens WM T Series Specification sheet

Register
your
product
online
siemens-home.bsh-group.com/welcome
en ,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV
Washing machine
WM..T...

2
Your new washing machine
You have chosen a Siemens washing
machine.
Please take a few minutes to read and
become familiar with the advantages of
your washing machine.
To meet the high quality demands
required by Siemens, every washing
machine that leaves our factory is
carefully checked to ensure that it
functions correctly and is in perfect
condition.
For more information on our products,
accessories, replacement parts and
services, see our website www.siemens-
home.bsh-group.com or contact our
after-sales service centres.
If the operating and installation
instructions describe different models,
any differences will be pointed out at the
relevant points in the text.
Read these operating and installation
instructions before switching on the
washing machine.
Display rules
:Warning!
This combination of symbol and signal
word indicates a possibly dangerous
situation. Not heeding the warning can
cause death or injuries.
Caution!
This signal word indicates a possibly
dangerous situation. Not heeding the
caution can cause property and/or
environmental damage.
Note/tip
Information about the optimum use of
the appliance/any other useful
information.
1. 2. 3. / a) b) c)
The steps are represented by numbers
or letters.
■/ -
Lists are represented by a small box or
a dash.

en
3
Contents enInstruction Manual and Installation Instructions
8Intended use. . . . . . . . . . . . . . . . .5
(Safety instructions . . . . . . . . . . .5
Children/people/pets . . . . . . . . . . . . . 5
Installation. . . . . . . . . . . . . . . . . . . . . . 6
Operation . . . . . . . . . . . . . . . . . . . . . . 9
Cleaning/Maintenance . . . . . . . . . . . 10
7Environmental protection . . . . .11
Packaging/used appliance . . . . . . . . 11
Tips on economical use . . . . . . . . . . 11
5Positioning and connecting . . .12
Included with the appliance . . . . . . . 12
Safety instructions. . . . . . . . . . . . . . . 13
Installation surface . . . . . . . . . . . . . . 13
Installation on a base or a wooden joist
floor . . . . . . . . . . . . . . . . . . . . . . . . . 13
Installation on a platform with drawer 14
Installing the appliance in a kitchenette
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Removing the transport locks . . . . . . 14
Hose and cable lengths . . . . . . . . . . 15
Water inlet. . . . . . . . . . . . . . . . . . . . . 15
Water outlet . . . . . . . . . . . . . . . . . . . 16
Levelling . . . . . . . . . . . . . . . . . . . . . . 17
Electrical connection. . . . . . . . . . . . . 17
Before washing for the first time . . . . 18
Transportation. . . . . . . . . . . . . . . . . . 18
*Familiarising yourself with your
appliance . . . . . . . . . . . . . . . . . .20
Washing machine . . . . . . . . . . . . . . . 20
Controls . . . . . . . . . . . . . . . . . . . . . . 21
ZLaundry. . . . . . . . . . . . . . . . . . . .23
Prepare the laundry . . . . . . . . . . . . . 23
Sorting laundry . . . . . . . . . . . . . . . . . 23
Starching . . . . . . . . . . . . . . . . . . . . . 24
Dyeing/bleaching . . . . . . . . . . . . . . . 24
CDetergent . . . . . . . . . . . . . . . . . .24
Correct selection of detergent . . . . . 24
Saving energy and detergent . . . . . .25
0Programme default settings. . . 25
Temperature . . . . . . . . . . . . . . . . . . .25
Скорость отжима (Spin speed) . . . .25
Ready in time . . . . . . . . . . . . . . . . . .25
Memory programme . . . . . . . . . . . . .26
Remote start . . . . . . . . . . . . . . . . . . .26
\Additional programme settings27
Дополнительное полоскание (Rinse+)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Speed . . . . . . . . . . . . . . . . . . . . . . . .27
Антисмин. (Less iron) . . . . . . . . . . . .27
Предв. Стирка (Prewash) . . . . . . . . .27
Замачивание (Soaking) . . . . . . . . . .27
Без отжима (Rinse hold) . . . . . . . . .28
i-Dos . . . . . . . . . . . . . . . . . . . . . . . . .28
1Operating the appliance . . . . . . 28
Preparing the washing machine . . . .28
Switching on the appliance/selecting a
programme . . . . . . . . . . . . . . . . . . . .28
Calling up additional programmes . .29
Change the programme default settings
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Select additional programme settings29
Placing laundry into the drum . . . . . .29
Measure and add detergent and care
products . . . . . . . . . . . . . . . . . . . . . .30
Start the programme . . . . . . . . . . . . .30
Блокировка включена (Childlock)/
operation lock . . . . . . . . . . . . . . . . . .30
Adding laundry . . . . . . . . . . . . . . . . .31
Changing the programme . . . . . . . . .31
Cancel the programme . . . . . . . . . . .31
Programme end during rinse hold. . .31
Programme end . . . . . . . . . . . . . . . .31
Removing laundry/switching off the
appliance. . . . . . . . . . . . . . . . . . . . . .32
oHome Connect . . . . . . . . . . . . . . 32
Calling up the Home Connect menu .33
Connecting to the home network and
the Home Connect app . . . . . . . . . . .33

en
4
Activating/deactivating Wi-Fi . . . . . . 35
Resetting your network settings. . . . 35
Updating the software . . . . . . . . . . . 36
Remote diagnostics. . . . . . . . . . . . . 36
Information on data protection. . . . . 36
Declaration of Conformity . . . . . . . . 36
aIntelligent dosing system. . . . . 37
Familiarising yourself with i-Dos. . . . 37
i-Dos Detergent drawer . . . . . . . . . . 37
Before setting up i-Dos . . . . . . . . . . 37
Automatic dosing. . . . . . . . . . . . . . . 38
i-DosSetting the content of the M/¨
dispenser. . . . . . . . . . . . . . . . . . . . . 38
i-Dos Setting the dosage . . . . . . . . . 38
Filling the dispensers. . . . . . . . . . . . 39
Manual dosing . . . . . . . . . . . . . . . . . 40
Emptying the i-Dos detergent drawer,
cleaning the i-Dos detergent drawer and
its housing, cleaning the i-Dos pump
unit. . . . . . . . . . . . . . . . . . . . . . . . . . 41
QAppliance settings . . . . . . . . . . 42
Activating the setting mode . . . . . . . 43
Changing the signal volume . . . . . . 43
Changing the brightness of the touch
display . . . . . . . . . . . . . . . . . . . . . . . 43
Select/deselect the memory function for
drum care . . . . . . . . . . . . . . . . . . . . 43
Exiting setting mode . . . . . . . . . . . . 43
HSensors . . . . . . . . . . . . . . . . . . . 44
Automatic load sensing . . . . . . . . . . 44
Unbalanced load detection system . 44
VoltCheck . . . . . . . . . . . . . . . . . . . . 44
2Cleaning and maintenance . . . 44
Machine housing/control panel . . . . 44
Drum . . . . . . . . . . . . . . . . . . . . . . . . 45
Descaling. . . . . . . . . . . . . . . . . . . . . 45
The drain pump is blocked, emergency
draining . . . . . . . . . . . . . . . . . . . . . . 45
The drain hose at the siphon is blocked
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Filter in the water supply blocked . . 46
3Faults and what to do about them.
. . . . . . . . . . . . . . . . . . . . . . . . . . 46
Emergency release. . . . . . . . . . . . . . 46
Information on the display panel . . . 47
Faults and what to do about them.. . 49
JTechnical data . . . . . . . . . . . . . 52
4After-sales service . . . . . . . . . . 52
rAqua-Stop warranty . . . . . . . . . 53

Intended use en
5
8Intended use
Intendeduse ■This appliance is intended for private
domestic use only.
■Do not install or operate this
appliance anywhere that is liable to
experience frost and/or outdoor
conditions. There is a risk that the
appliance will be damaged if
residual water in it freezes. If hoses
freeze up, they may crack/burst.
■This appliance must only be used for
washing domestic laundry,
consisting of machine-washable
items and hand-washable woollens
(see label on item). Using the
appliance for any other purpose is
outside of the scope of its intended
application and is forbidden.
■This appliance is suitable for
operation with mains water and
commercially available detergents
and care products (must be suitable
for use in washing machines).
■This appliance is intended for use up
to a maximum height of
4000 metres above sea level.
Before you switch on the appliance:
Check that there is no visible damage to
the appliance. Do not operate the
appliance if it is damaged. Should you
have any problems, please contact your
specialist dealer or our customer
service.
Read and follow the operating and
installation instructions and all other
information provided with this appliance.
Retain the documents for subsequent
use or for subsequent owners.
(Safety instructions
Safetyinstructions The following safety information
and warnings are provided to
protect you from injury and to
prevent material damage to
your surroundings.
It is nevertheless important to
take the necessary precautions
and to proceed with care when
installing, maintaining, cleaning
and operating the appliance.
Children/people/pets
:Warning
Risk of death!
Children and other people who
are unable to assess the risks
involved when using the
appliance may injure
themselves or may find
themselves in life-threatening
situations. Therefore please
note:
■The appliance may be used
by children over the age of 8
years and by persons with
reduced physical, sensory or
mental capacity or by
persons with a lack of
experience or knowledge as
long as they are supervised
or have received instruction
on how to use the appliance
safely and they have
understood the potential
risks of using the appliance.
■Children must not play with
this appliance.

en Safety instructions
6
■Do not allow children to
clean or maintain this
appliance unsupervised.
■Keep children under 3 years
and pets away from this
appliance.
■Do not leave the appliance
unattended when children or
other people who are unable
to assess the risks are in the
vicinity.
:Warning
Risk of death!
Children may lock themselves
inside appliances and find
themselves in a life-threatening
situation.
■Do not position the
appliance behind a door, as
this may obstruct the
appliance door or prevent it
from opening completely.
■Once an appliance has
reached the end of its life,
pull the mains plug from the
socket before severing the
mains cable, and then
destroy the lock on the
appliance door.
:Warning
Risk of suffocation!
If allowed to play with the
packaging/plastic film or
packing components, children
may become caught in these or
pull them over their heads and
suffocate.
Keep packaging, plastic film
and packing components away
from children.
:Warning
Risk of poisoning!
Detergents and care products
may result in poisoning if
consumed.
If accidentally swallowed, seek
medical advice. Keep
detergents and care products
out of the reach of children.
:Warning
Risk of burns!
When washing at high
temperatures, the glass in the
appliance door becomes hot.
Stop children from touching the
appliance door when it is hot.
:Warning
Eye/skin irritation!
Contact with detergents or care
products may cause eye/skin
irritation.
Rinse eyes/skin thoroughly if
they/it come(s) into contact
with detergents or care
products. Keep detergents and
care products out of the reach
of children.
Installation
:Warning
Risk of electric shock/fire/
material damage/damage to
the appliance!
If the appliance is not installed
properly, this may lead to a

Safety instructions en
7
dangerous situation. Ensure
the following:
■The mains voltage on your
power socket must match
the rated voltage specified
on the appliance
(identification plate). The
connected loads and the
required fuse protection are
specified on the identification
plate.
■The mains plug and the
protective contact socket
must match and the earthing
system must be correctly
installed.
■The installation must have an
adequate cross section.
■The mains plug must be
freely accessible at all times.
If this is not possible, in
order to comply with the
relevant safety regulations, a
switch (all pole
disconnection) must be built
into the permanent
installation in accordance
with electrical installation
regulations.
■If using a residual current
circuit breaker, only use one
that bears the following
mark: z. The presence of
this mark is the only way to
be sure that it fulfils all the
applicable regulations.
:Warning
Risk of electric shock/fire/
material damage/damage to
the appliance!
If the appliance's mains cable is
altered or damaged, this may
result in electric shock, short
circuiting or fire due to
overheating.
The mains cable must not be
kinked, crushed or altered, and
must not come into contact with
any heat sources.
:Warning
Risk of fire/material damage/
damage to the appliance!
The use of extension cords or
power strips may result in fire
due to overheating or short
circuiting.
Connect the appliance directly
to an earthed socket that has
been correctly installed. Do not
use extension cords, power
strips or multi-way couplers.
:Warning
Risk of injury/material
damage/damage to the
appliance!
■The appliance may vibrate or
move when in operation,
potentially resulting in injury
or material damage.
Place the appliance on a
clean, even, solid surface
and, using a spirit level to
guide you, level it with the
screw-in feet.
Risk of injury/material damage/damage to the appliance!

en Safety instructions
8
■If you take hold of any of the
appliance's protruding parts
(e.g. the appliance door) in
order to lift or move it, these
parts may break off and
cause injury.
Do not take hold of any of
the appliance's protruding
parts in order to move the
appliance.
:Warning
Risk of injury!
■The appliance is very heavy.
Lifting it may result in injury.
Do not lift the appliance on
your own.
Risk of injury!
■The appliance has sharp
edges on which you could
cut your hands.
Do not take hold of the
appliance by its sharp
edges. Wear protective
gloves to lift it.
Risk of injury!
■If the hoses and mains
cables are not correctly
routed, they may constitute a
tripping hazard, which may
result in injury.
Route hoses and cables
such that they do not
constitute a tripping hazard.
Caution!
Material damage/damage to
the appliance
■If the water pressure is too
high or too low, the
appliance may not be able to
operate properly, and it may
also result in material
damage or damage to the
appliance.
Make sure that the water
pressure in the water supply
facility is at least
100 kPa (1 bar), and does
not exceed
1000 kPa (10 bar).
Material damage/damage to the appliance
■If the water hoses are altered
or damaged, this may result
in material damage or
damage to the appliance.
The water hoses must not be
kinked, crushed, altered or
severed.
Material damage/damage to the appliance
■The use of hoses supplied
by other brands to connect
to the water supply may
result in material damage or
damage to the appliance.
Use the hoses supplied with
the appliance or genuine
spare part hoses only.
Material damage/damage to the appliance

Safety instructions en
9
■The appliance is secured for
transportation by transport
locking devices. If the
transport locking devices are
not removed before the
appliance is operated, this
may result in damage to the
appliance.
It is important to completely
remove all transport locking
devices before using the
appliance for the first time.
Make sure that you retain
these transport locking
devices separately. It is
important to refit the
transport locking devices if
the appliance is to be
transported, in order to
prevent the appliance from
being damaged in transit.
Operation
:Warning
Risk of explosions/fire!
Laundry that has been
pretreated with cleaning agents
that contain solvents, e.g. stain
remover/cleaning solvent, may
cause an explosion in the drum.
Rinse the laundry thoroughly
with water before washing it in
the machine.
:Warning
Risk of poisoning!
Poisonous fumes may be given
off by cleaning agents that
contain solvents, e.g. cleaning
solvent.
Do not use cleaning agents that
contain solvents.
:Warning
Risk of injury!
■If you support your weight/sit
on the appliance door when
it is open, the appliance may
tip over, which may result in
injury.
Do not support your weight
on the appliance door when
it is open.
Risk of injury!
■If you climb onto the
appliance, the worktop may
break, which may result in
injury.
Do not climb onto the
appliance.
Risk of injury!
■If you reach into the drum
while it is still rotating, you
risk injuring your hands.
Wait until the drum has
stopped rotating.
:Warning
Risk of scalding!
When washing at high
temperatures, there is a risk of
scalding if you come into
contact with hot detergent
solution (e.g. when draining hot
detergent solution into a
washbasin).
Do not reach into the hot
detergent solution.
:Warning
Eye/skin irritation!
Detergent and care products
may spray out if the detergent

en Safety instructions
10
drawer is opened while the
appliance is in operation.
Rinse eyes/skin thoroughly if
they/it come(s) into contact
with detergents or care
products. If accidentally
swallowed, seek medical
advice.
Caution!
Material damage/damage to
the appliance
■If the amount of laundry in
the appliance exceeds its
maximum load capacity, it
may not be able to operate
properly, or this may result in
material damage or damage
to the appliance.
Do not exceed the maximum
load capacity of dry laundry.
Make sure you comply with
the maximum load capacities
specified for each of the
programs.
Material damage/damage to the appliance
■If you pour the wrong
quantity of detergent or
cleaning agent into the
appliance, this may result in
material damage or damage
to the appliance.
Use detergents/care
products/cleaning agents
and softeners in accordance
with the manufacturers'
instructions.
Cleaning/Maintenance
:Warning
Risk of death!
The appliance is powered by
electricity. There is a risk of
electric shock if you come into
contact with live components.
Therefore please note:
■Switch off the appliance.
Disconnect the appliance
from the power supply (pull
out the plug).
■Never take hold of the mains
plug with wet hands.
■When removing the mains
plug from the socket, always
take hold of the plug itself
and never the mains cable,
otherwise this may damage
the mains cable.
■Do not make any technical
modifications to the
appliance or its features.
■Repairs and any other work
on the appliance must only
be conducted by our
customer service or by an
electrician. The same applies
for replacing the mains cable
(when necessary).
■Spare mains cables can be
ordered from our customer
service.
:Warning
Risk of poisoning!
Poisonous fumes may be given
off by cleaning agents that
contain solvents, e.g. cleaning
solvent.

Environmental protection en
11
Do not use cleaning agents that
contain solvents.
:Warning
Risk of electric shock/material
damage/damage to the
appliance!
If moisture penetrates the
appliance, this may cause it to
short circuit.
Do not use a pressure washer,
steam cleaner, hose or spray
gun to clean your appliance.
:Warning
Risk of injury/material
damage/damage to the
appliance!
The use of spare parts and
accessories supplied by other brands
is dangerous and may result in injury,
material damage or damage to the
appliance.
For safety reasons, use genuine spare
parts and accessories only.
Caution!
Material damage/damage to
the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain
removers, prewash sprays, etc.)
may cause damage if they
come into contact with the
surfaces of the appliance.
Therefore please note:
■Do not allow these agents to
come into contact with the
surfaces of the appliance.
■Clean the appliance with
nothing but water and a soft,
damp cloth.
■Remove any detergent,
spray or other residues
immediately.
7Environmental
protection
Environmentalprotecti on Packaging/used appliance
Tips on economical use
■Always utilise the maximum amount
of washing for the particular
programme.
Overview of programmes ~
Supplementary sheet for the
operating and installation
instructions.
■Wash normally soiled laundry
without prewash.
■For light and normal soiling in
laundry, you can save energy and
detergent. ~Page 25
■The selectable temperatures apply
to the care labels on the textiles. The
temperatures in the machine may
deviate from this so that you get the
optimum mix of energy-saving and
washing results.
)Dispose of packaging in an
environmentally-responsible
manner.
This appliance is labelled in
accordance with European
Directive 2012/19/EU
concerning used electrical and
electronic appliances (waste
electrical and electronic
equipment - WEEE).
The guideline determines the
framework for the return and
recycling of used appliances
as applicable throughout the
EU.

en Positioning and connecting
12
■Energy- and water-consumption
information:
These indicators tell you what the
relative energy and water
consumption is for the selected
programs.
The more indicator segments are
visible, the higher the consumption.
This enables you to compare the
consumption levels of the different
programs when choosing your
program settings and to decide on
an energy- and water-saving
program setting if you wish.
–§Energy consumption
–XWater consumption
■Energy-saving mode: The touch
display lighting goes out after a few
minutes, the Übutton flashes.
Touch the touch display to activate
the lighting.
Energy-saving mode is not activated
if a programme is running.
■Automatic switch-off (only until a
program starts or after a program
has ended): If the appliance is not
operated for an extended period, it
automatically switches itself off in
order to save energy. Press the main
switch again to switch on the
appliance.
Note: If Wi-Fi is activated, the
appliance will not switch itself off
automatically.
■If the washing will be dried in a
dryer, select the spin speed
according to the dryer
manufacturer's instructions.
5Positioning and
connecting
Positioningandconnecting Included with the appliance
Note: Check that the machine has not
been damaged in transit.Never use a
damaged machine. If you have any
problems, contact the dealer from
whom you purchased the appliance or
our after-sales service.
(Mains cable
0Bag:
■Installation and operating
instructions
■After-sales service location
directory*
■Warranty*
■Cover caps for fitting over
openings once the transit
securing devices have been
removed
■Spanner*

#

3
+


Positioning and connecting en
13
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water drain hose to a siphon.
Useful tools
■Spirit level for making sure the
appliance is level
■Spanners, size:
– WAF13 for removing the transit
securing devices and
– WAF17 for making the
appliance's feet level
Safety instructions
:Warning
Risk of injury!
■The washing machine is very heavy.
Be careful when lifting/transporting
the washing machine.
■When the washing machine is lifted
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.
Caution!
Water damage
The connection points for the water
supply hose and water drain hose are
under high water pressure. To prevent
leaks and water damage, you must
follow the instructions in this section.
Notes
■In addition to the safety information
listed here, the local water and
electricity supplier may have special
requirements.
■If in doubt, have the appliance
connected by a specialist.
Installation surface
Note: The washing machine be stable
so that it does not move around.
■The installation surface must be firm
and level.
■Soft floors/floor coverings are not
suitable.
Installation on a base or a
wooden joist floor
Caution!
Damage to the appliance
The washing machine may "wander"
and tip/topple from the base when
spinning.
The feet of the appliance must be
secured with holding brackets.
Order no. WMZ 2200, WX 9756,
Z 7080X0
Note: On wooden joist floors, install the
washing machine:
■In a corner, if possible,
■On a water-resistant wooden board
(min. 30 mm thick) which is screwed
tightly to the floor.
8Water supply hose on aquaStop
models
@Water drain hose
HElbow for securing the water
drain hose*
PWater supply hose on standard/
AquaSecure models
* Depending on the model

en Positioning and connecting
14
Installation on a platform with
drawer
Platform order no.: WMZ 20490, WZ
20490, WZ 20510, WZ 20520
Installing the appliance in a
kitchenette
:Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Do not remove the appliance covering
plate.
Notes
■Recess width of 60 cm required.
■Only install the washing machine
underneath a continuous worktop
that is securely connected to
adjacent cabinets.
Removing the transport locks
Caution!
Damage to the appliance
■The machine is secured for
transportation using transport locks.
If the transport locks are not
removed, the drum, for example,
may become damaged when the
machine is operated.
Before using the appliance for the
first time, make sure that you
completely remove all four transport
locks. Keep the locks in a safe
place.
■To prevent transport damage from
occurring if the appliance is moved
at a later date, you must refit the
transport locks before transporting
the appliance.
Note: Keep the screws and sleeves in
a safe place.
1. Take the hoses out of the holders.
2. Unscrew and remove all four
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
3. Fit the covers. Lock the covers firmly
in place by applying pressure to the
snap-in hooks.

Positioning and connecting en
15
Hose and cable lengths
■Left-hand connection
■Right-hand connection
Tip: The following are available from
specialist dealers/the after-sales
service:
■An extension for Aqua-Stop or cold
water supply hose (approx. 2.50 m);
order no. WMZ2380, WZ10130,
CZ11350, Z7070X0
■A longer supply hose (approx.
2.20 m) for standard model
Water inlet
:Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve in water (it contains an electric
valve).
Notes
■Only operate the washing machine
using cold mains water.
■Do not connect the machine to the
mixer tap of an unpressurised hot-
water boiler.
■Do not use a used supply hose. Only
use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.
■Do not kink or squash the water
supply hose.
■Do not alter (shorten, cut through)
the water supply hose (otherwise its
strength is no longer guaranteed).
■Only tighten the screw connections
by hand. If the screw connections
are tightened too much with a tool
(pliers), the thread may become
damaged.
■When connecting to a 21 mm = ½"
tap, first fit an adapter* with a sealing
washer from 21 mm = ½" to 26.4
mm = ¾".
*supplied depending on the model
Optimum water pressure in the supply
network
At least 100 kPa (1 bar)
Maximum 1000 kPa (10 bar)
When the tap is open, the water flow
rate is at least 8 l/min.
If the water pressure is higher than this,
a pressure-reducing valve must be
installed.
Connection
Connect the water supply hose to the
tap (26.4 mm = ¾") and to the
PD[FP
aFP
aFP
aFP
aFP
PD[FP
aFP
aFP
PLQPP
ê
ë

en Positioning and connecting
16
appliance (not necessary for Aqua-Stop
models as this is permanently installed):
■Model: Standard
■Model: Aqua-Secure
■Model: Aqua-Stop
Note: Turn on the tap carefully,
checking the leak tightness of the
connection points. The screw
connection is under mains water
pressure.
Water outlet
:Warning
Risk of scalding!
When washing at high temperatures,
there is a risk of scalding if you come
into contact with hot detergent solution
(e.g. when draining hot detergent
solution into a washbasin).
Do not reach into the hot detergent
solution.
Caution!
Water damage
When water is being pumped away, the
outlet hose is under water pressure and
may slip out of the wash basin or
connection point.
Secure the outlet hose so that it cannot
slip out.
Caution!
Damage to the appliance/fabrics
If the end of the outlet hose is immersed
in the drained water, water may be
sucked back into the appliance and
may damage the appliance/fabrics.
Make sure that:
■The plug does not block drainage
from the wash basin.
■The end of the drain hose is not
immersed in the drained water.
■The water drains away quickly
enough.
Note: Do not kink the water drain hose
or stretch it lengthways.
Connection
■Drainage into a siphon
The connection point must be
secured using a hose clamp with a
diameter of 24–40 mm (available
from specialist dealers).
■Drainage into a wash basin
Secure the outlet hose so that it
cannot slip out.
Elbow available from after-sales
service:
Individual part number 00655300

Positioning and connecting en
17
■Drainage into a plastic pipe with
rubber sleeve or into a gully
Levelling
Level the appliance using a spirit level.
Incorrect levelling may result in intense
noise, vibrations and "wandering".
1. Loosen the lock nuts using a
wrench, by turning it in a clockwise
direction.
2. Check the alignment of the washing
machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
3. Tighten the lock nut against the
housing.
In doing so, hold the foot tight and
do not adjust its height.
The lock nuts on all four appliance
feet must be screwed tightly against
the housing.
Electrical connection
:Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
■Never touch or hold the mains plug
with wet hands.
■Only pull out the mains cable by the
plug and never by the cable, as this
could damage it.
■Never unplug the mains plug during
operation.
Observe the following information and
ensure that:
Notes
■The mains voltage and voltage
indicated on the washing machine
(rating plate) are the same.
The connected load and fuse
required are specified on the rating
plate.
■The washing machine is only
connected to an alternating current
via a properly installed earthed
socket.
■The mains plug fits the socket.
■The cable cross-section is adequate.
■The earthing system is properly
installed.
■The mains cable is only replaced by
a qualified electrician (if this is
necessary). Replacement mains
cables are available from the after-
sales service.
■No multiple plugs/couplings or
extension cables are used.
■If an earth-leakage circuit breaker is
used, only a type which displays this
symbol is used: z.
Only this symbol guarantees
compliance with the currently
applicable regulations.

en Positioning and connecting
18
■The mains plug must be freely
accessible at all times. If this is not
possible, in order to comply with the
relevant safety regulations, a switch
(2-pole switch-off) must be built into
the permanent installation in
accordance with electrical
installation regulations.
■The mains cable is not bent,
squashed, modified, cut through, or
in contact with heat sources.
Before washing for the first
time
The washing machine has been
thoroughly tested before leaving the
factory.To remove any water that may
be left over from testing, run the first
wash cycle without any laundry.
Notes
■The washing machine must be
correctly installed and connected.
See ~Page 12 onwards
■Never use a damaged machine.
Notify your after-sales service.
Preparatory work:
1. Check the machine.
2. Fill the ¨and Mdispensers.
~Page 39
3. Remove the protective film from the
control panel.
4. Plug in the mains plug.
5. Turn on the tap.
Run the program without laundry:
1. Switch on the appliance.
2. Close the door (do not load any
laundry).
3. Set the Oчиcтка барабана (Drum
Clean) 90 °C program.
4. Open the detergent drawer.
5. Pour approx. 1 litre of water into the
manual dosing compartment.
6. Pour all-purpose detergent into the
manual dosing compartment.
Note: To prevent foaming, only use
half the amount of detergent
recommended by the detergent
manufacturer.Do not use detergents
intended for woollens or delicates.
7. Close the detergent drawer.
8. Start the program.
9. Switch off the appliance once the
program has finished.
Your washing machine is now ready to
use.
Transportation
E.g. when moving house
Preparatory work:
1. Turn off the tap.
2. Release the water pressure in the
supply hose: ~"Filter in the water
supply blocked" on page 46
3. Disconnect the washing machine
from the mains power supply.
4. Drain the remaining water: ~"The
drain pump is blocked, emergency
draining" on page 45
5. Detach the hoses.
6. Empty the dispensers. ~Page 41
Caution!
Risk of damage to the appliance
caused by detergent/fabric softener
leaking from the dispensers
Leaking detergent/fabric softener
can prevent the appliance from
working correctly, e.g. due to
damage to the electronics.
Empty the dispensers before
transporting the appliance.

Positioning and connecting en
19
Fitting the transportation securing
means:
1. Remove the covers and keep them
in a safe place.
If required, use a screwdriver.
2. Insert all four sleeves.
Clip the mains cable securely in the
holders. Insert the transportation
securing bolts and tighten them with
a wrench (WAF 13).
Before switching on the appliance
again:
Notes
■The transit securing devices must
be removed. ~Page 14
■To prevent unused detergent from
flowing straight into the drain during
the next wash, pour approx. 1 litre of
water into the manual dosing
compartment, select the Слив
(Drain/Empty) program and start
this program.

en Familiarising yourself with your appliance
20
*Familiarising yourself with your appliance
Fami liari singyourself withyour appliance Washing machine




#
6 7
(Detergent drawer ~Page 30
0Controls
8Washing machine door with
handle
9S Opening the washing machine
door
9T Closing the washing machine
door
@Service flap