Siemens WM14P360GB User manual

1 2 3 4 5 6
Individual settings
ʑAudible signal
1. Activate the
mode for
setting the
signal volume
Set to º1 step to
the right
Press and
hold +Release1 step to the right
1400
1200
800
400
ccc1400
1200
800
400
ccc
Set to º
Button signals Information signals
Setting the
volume*
* you may need to select the function several times.
1 step to
the right
1400
1200
800
400
ccccc1400
1200
800
400
ccccc
1 step to
the right
Setting the
volume*
2. Set the volume
for ...
Spin speed
1 - 24 Finish in Programme end after
Status
indicators
Programme Status indicators:
1ü2ce–¯– Wash, Rinse, Spin, End of programme
––– Rinse Stop reached
– Æ– Pause
Programme selector Display panel/
option button/
status indicators
Start/
Pause
Additional
functions
Sorting and loading the laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperatur e.
Do not exceed the maximum load ap age 7.
Observe the important information apage 9.
Insert items of laundry of varying sizes.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door a nd the rubber seal.
Adding detergent and care products
Measure accordingly:
Amount of laundry, level of soiling, wate r hardness (ask your water supply
company) and manufacturer's instructions.
Models without insert for liquid d etergent:
Pour liquid detergent into the appro priate dispenser and place in the drum.
During operation: Open the detergen t drawer with care.
Insert for liquid detergent (depending o n model), page 10.
Your washing machine Intended use
Contents Page
ʋIntended u se ...................................................................................... 1
ʋProgrammes ...................................................................................... 1
ʋSetting a nd adjusting the programme .......................................... 3
ʋWashing .......................................................................................... 3/ 4
ʋAfter wa shing ..................................................................................... 4
ʋIndividual se ttings ................................................... ...................... 5/6
ʋOverview of programmes ................................................................ 7
ʋSafety instruc tions ....... ...................................................................... 8
ʋConsumption v alues ....................................... .................................. 8
ʋImportant inform ation ....................................................................... 9
ʋInsert for liquid deterge nt .................................................. ............ 10
ʋCare ................................................................................................. ..10
ʋInformation on the display panel ................................................. 10
ʋInstructions f or blockag es ............................................................. 11
ʋWhat to do if... ............................................................................ 12/13
ʋEmergency r elease .......................................................................... 13
ʋAfter-sales ser vice.................... ........................................................ 13
Protection of the environment/Conservation tips
– Always fill the washing ma chine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled l aundry without a prewash.
– Instead of Cottons/Co loureds 90 °C, select Eco 60 °C and the
Intensive Wash additional f unction. Comparable cleaning result
with significantly lower energy consumption.
– Measure the detergent acc ording to the manufacturer's
instructions and water hardness.
– If the laundry is the n dried in the tumble dryer, select the
appropriate spin speed according to t he instructions of the dryer
manufacturer.
Preparation Before washing for the first time
Run a wash cycle without any laundry apage 9
Set and adjust the programme 1
2
Washing
Compartment ~: fabric softener, starch
Compartment I: Detergent for prewash
ʋFor domestic use only
ʋFor machine-washable fabrics and ha nd-washable wool
in detergent solution
ʋTo be operated with cold drinking water and comme r-
cially available detergents and care pro ducts which are
suitable for use in washing machines
– Do not leave children unattended near the
washing machine.
– The was hing machine is not to be used by
children or persons not familiar with the operating
instructions.
– Keep pets away from the washing machine.
Dilute thick fabric softener and care produ cts with water.
This prevents blockages.
Detergent drawer
with compartments I, II, ~
Control panel
Washing machine
door handle
Service flap
Washing machine door
Correct installation according to the
separate Installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connect the mains plug
– Make sure your hands are dry.
– Take hold of the plug only.
Turn the tap on
Additional functions, option
button and spin speed
aIndividual settings, page 5.
Select Start
Washing
End of programme when ...
... Start flashes and –¯– appears in the display panel.
Cancel the programme
Programmes at high temperatures:
– Cool laundry: Select Rapid 15 ’.
– Select Start.
Programmes at lower temperatures:
– Select Spin or Empty.
– Select Start.
Change the programme if...
... you have selected the wrong program me by mistake:
– Reselect the programme.
– Select Start. The new programme starts from the
beginning.
Cancel programme
– Select Start. – Æ– in the display panel.
– if required, add laundry (do not leave the washing
machine door open for too long as wate r from the
laundry could leak out).
– Select Start.
Individual settings
ʑOption button Finish in
When you select the programme, the relevan t programme duration is displayed. You can
delay the start of the programme before it begins. Th e Finish in time can be set in increments
of one hour up to a maximum of 24 hours. Press the Finish in button repeatedly until the
required number of hours is displayed ( h = hour). Select Start. It is not possible to make
adjustments once the programme has started.
ʑSpin speed (rpm) / c(Rinse Stop = no final spin)
You can change the spin speed shown or select c(Rinse Stop = no fi nal spin, laundry
remains in the water after th e last rinse, display panel –––). The maximum selectable spin
speed depends on the model and on which programm e is currently selected.
ʑAdditional functions aand overview of programmes, page 7
Intensive Wash Extend the washing time for a more intensive washing of heavily
soiled items.
Prewash For heavily soiled items. Prewa sh at 30 °C.
Less Ironing Special spin sequence with subsequent fluffing. Gentle final spin at
reduced speed. Residual moisture in the laundry is increased slig htly.
Extra Rinse Additional rinse cycle. For areas with very soft water or for further
enhancing the washing result.
ʑStart
For starting or interrupting the prog ramme.
All buttons are sensitive and
need only to be touched
lightly. If you press and hold
the Finish in option button for
too long, the appliance
automatically cycles through
the setting options.
3
Programmes
Detailed programme overview apage 7.
The spin speed can be selected on an individual basis,
irrespective of which programme is selected and how far
through it is.
Cottons/Coloureds Hard-wearing fabrics
Eco Hard-wearing fabrics
Mixed Fabrics Different types of laundry
Rapid 15’ SuperQuick programme,
also suitable as a rinse programme
Spin Extra spin with selectable spin speed
Empty the rinsing water when is activa ted
(Rinse Stop = no final spin)
ÿüWool Hand/machine-washable wool
Delicates/Silk Delicate washable fabrics
Easy-Care Easy-care fabrics
Switching off
Turn the programme selector to Off.
Turning the tap off
Not required for AquaStop models aInstallation
instructions, page 7.
Removing the laundry
Open the washing machine door and remove the laundry.
If (Rinse Stop = no Final spin) is activ e:
Turn the programme s elector to Empty or select the spin
speed. Select Start.
– Remove any foreign obje cts - risk of rusting.
– L eave the washing machine door and detergent
drawer open so that any residual water can dry
away.
Congratulations äyou have opted for a modern, high-quality
domestic appliance manufactured by Siemens. This washing
machine is distinguished by its econom ical water and energy
consumption.
Each machine that leaves our factory is in spected thoroughly to
ensure that it functions properl y and is in perfect condition.
For more information on our products, acce ssories, replacement
parts and services, see our website www.siemens-hom e.com or
contact our after-sales service centres.
Compartment II: detergent for main wash,
water softener, bleach, stain remover
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
7
Overview of programmes aCheck the consu mption values table on page 8 and the instructions on page 9.
The programmes are time-controlled for lightly so iled fabrics. If fabrics are heavily soiled, reduce the load or select an additional function, e.g. Intensive Wash.
Always select the additional Intensive Wash function when washing the maximum load with programmes marked with *.
Regardless of the type of laundry, Easy-Care 40 °C is, as a short programme, best suited to max. spin speed.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments Iand II.
Programmes °C max. Type of laundry Additional functions; options; information
Cottons/ Coloureds 30, 40, 60, 90 °C 8 kg* Hard-wearing fabrics, heat-resistant fabrics made
of cotton or linen Intensive Wash, Prewash,Less Ironing,Extra Rinse,
(Rinse Stop)
Eco 60 °C Easy-Care 30, 40, 60 °C
3.5 kg*
Easy-care fabrics made of cotton, linen, sy nthetic fibres or blended fabrics Intensive Wash, Prewash, Less Ironing,Extra Rinse,
(Rinse Stop)
Mixed Fabrics 40 °C Fabrics made of cotton or easy-care fabrics Intensive Wash, Prewash, Less Ironing,Extra Rinse,
(Rinse Stop);
different types of laundry can be washed together
Delicates/Silk 30 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
Intensive Wash, Prewash, Less Ironing,Extra Rinse,
(Rinse Stop);
spin between the rinse cycles only
ÿüWool cold, 30 °C Hand or machine-washable fabrics made of wool
or containing wool (Rinse Stop);
Particularly gentle wash programme to pr event shrinkage of laundry. Longer programme breaks (fabrics rest in the detergent solution)
Rapid 15’ 30 °C Easy-care fabrics made of cotton, linen, syn thetic
fibres or blended fabrics
(Rinse Stop);
Short programme, approx. 15 minutes, suitable for lightly soiled laundry or f or thorough rinsing (do not add any
detergent)
Additional programmes Spin, Empty
0510/ 9000540548 *540548* WM14P360GB
WM12P360GB
WM14P36SGB
Siemens-Electrogeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland

8
Safety instructions
– Read the Instruction manual and Installation instructions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull on the cable to disconnect the mains plug.
– Only insert/pull out the mains plug with dry hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and re move with the plug.
– Destroy the lock on the washing machine door. Thi s will prevent
children from locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children .
Risk of explosion – Items of laundry pretreated w ith cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the was hing machine.
Rinse items of laundry thoroughly by h and beforehand.
Risk of injury – The wa shing machine door can become very hot.
– Be careful when emptyi ng hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Additional function Load Electricity
consumption*** Water*** Programme
duration***
Cottons/Coloureds 30 °C** Intensive Wash 8 kg 0.61 kWh 80 l 2:12 h
Cottons/Coloureds 40 °C** Intensive Wash 8 kg 0.94 kWh 80 l 2:12 h
Cottons/Coloureds 60 °C** Intensive Wash 8 kg 1.65 kWh 80 l 2:12 h
Eco 60 °C** Intensive Wash 8 kg 1.20 kWh 56 l 3:25 h
Cottons/Coloureds 90 °C Intensive Wash 8 kg 2.73 kWh 97 l 2:12 h
Easy-Care 40 °C** Intensive Wash 3.5 kg 0.55 kWh 53 l 1:12 h
Easy-Care 40 °C**
(also suitable as a
short programme)-3.5 kg 0.54 kWh 53 l 0:45 h
Delicates/Silk 30 °C -2 kg 0.20 kWh 39 l 0:40 h
Wool cold -2 kg 0.08 kWh 40 l 0:36 h
Woolü30 °C -2 kg 0.20 kWh 40 l 0:36 h
* Programme setting for testing and energy labelling in accordance with EU Direc tive 92/75/EEC.
** Programme setting for testing in accordance with applicabl e standard EN60456.
Note on comparative tests: Whe n testing the test programmes, wash the specified load using
the maximum spin speed.
As a short programme for coloureds, s elect the Easy-Care 40 °C programme, using maximum
spin speed.
***The values d eviate from the indicated values depending on water pres sure, hardness, and inlet
temperature, ambient temperature, type, amount and so iling of the laundry, detergent used,
fluctuations in the power supply and selected additional func tions. 8
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn the tap on. Pour into compartment II:
– approx. 1 litre water
– detergent (dosage according to the ma nufacturer's instructions for light soiling and
according to water hardness)
Turn the programme selector to Easy-Care 60 °C and choose Start.
At the end of the programme, turn the pr ogramme selector to Off.
Protecting the laundry and the machine
– When determin ing the dosage of all washing powders, additives and cleani ng agents, you
must follow the manufacturer's instruc tions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a l aundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pock ets and collars.
– Remove curtain fittings or place i n the laundry bag.
Loading items of laundry
Insert items of laundry of varying sizes.
Take care not to trap items of laundry between the washing machine door and the rubber
seal.
Laundry with varying degrees of soili ng
Wash new items of clothing separatel y.
light Do not prewash.
Pretreat any stains as necessary. Select Intensive Wa sh additional
function as necessary.
heavy Do not load as mu ch laundry. Select the program with Prewash.
Pretreat any stains as necessary. Select Intensive Wa sh additional
function as necessary.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compa rtment II in accordance with the manufacturer's
instructions. Turn the programme selector to Cottons/Coloured s 30 °C and select Start. After
approx. 10 minutes, press Start,t o pause the programme. Once the required soaking time
has elapsed, press Start,again to conti nue the programme, or select a different programme.
Starching Laundry must not be treated with fa bric softener.
Starching is possible in all wash programmes i f liquid starch is used. Pour starch into the ~
fabric softener compartment in accordanc e with the manufacturer's instructions (rinse first if
necessary).
Dyeing/bleaching
Dye should only be used in normal ho usehold quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instruc tions. Do not use the washing machine for
bleaching clothes.
10
Insert for liquid detergent model-dependent
Position the insert for dispensing liquid deterge nt:
– Remove the detergent drawer completely apage 1 0.
– Slide the insert forwards.
Do not use the insert (slide upwar ds):
– For gel detergents and washing powd er
– For programmes with Prewash or the Finish in option
Care
ʑMachine housing, control panel
– Wipe with a soft, damp cloth.
– Remove detergent and cle aning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softe ner residues.
1. Pull out, press insert down, remove drawer compl etely.
2. To remove the insert: press the insert upwards from below with your
finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it.
4. Fit the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual wa ter can
evaporate.
ʑDrum
Leave the washing machine door open so t hat the drum can dry out.
Rust stains - use chlorine-free clean ing agent, not steel wool.
ʑDescaling Ensure there is no laundry in the machine
This should not be necessary if the correct de tergent dosage has been used. If it is necessary,
however, proceed according to the descaling ag ent manufacturer's instructions. Suitable
descalers can be obtained via our w ebsite or from our after-sales service (apage 13).
Information on the display panel depending on model
¨:³±Close the washing machine door properly; laundry may be caught.
¨:³Å,ÉOpen the tap completely, sup ply hose kinked or trapped; Clean the filter
apage 11, water pressure too low.
¨:³µDetergent solution pump blocked; Clean the deterg ent solution pump
apage 11.
Drainage hose/waste pipe blocked; Clean th e drainage hose at the siphon
apage 11.
¨:´Water in the base tub, appliance leaking. Ca ll the after-sales service.
¨:´,±³Washing machine door can not be locked. Open the washing m achine door
and close it with an audible "click"; s witch the appliance off and on again;
set the programme and make your settings; start the programme.
¨:,´,Motor fault. Call the after-sales serv ice.
Other displays Switch off the appliance, w ait for 5 seconds and switch it back on. If the
display appears again, call th e after-sales service apage 13.
–Risk of electric shock. Dis connect the mains plug.
–Risk of explosion. No solvents.
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off and disc onnect the mains plug.
1. Open and remove the service flap.
2. Take the drainage hose out of the retainer.
Remove the sealing cap, allow the de tergent solution to flow out.
Push the sealing cap back on.
3. Unscrew the pump cover carefully (r esidual water).
4. Clean the interior, pump cover thread and pump housing (the impeller
in the detergent solution pump must be able to rotate).
5. Replace the pump cover and screw it on tightly. The handle points upright.
Replace the drainage hose in the holder.
6. Refit the service flap and close it.
To prevent unused detergent from flowing str aight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disc onnect the mains plug.
1. Loosen the hose clamp, remove the drainage hose carefully (residual
water).
2. Clean the drainage hose and siphon co nnecting piece.
3. Reattach the drainage hose and secure the connection with the hose
clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the AquaStop safe ty device in water (it contains an electric valve).
Reduce the water pressure in the sup ply hose:
1. Turn off the tap.
2. Select any programme (except for Spin/Empty).
3. Select Start. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnec t the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose from the rear of the app liance.
Remove the filter with pliers and clean.
6. Connect the hose and check for lea ks.
Risk of scalding
– Allowthe detergent s olution to cool down.
– Turnoff the tap.
12
What to do if...
ʑWater is leaking out. – Attach/replace the drainage hose co rrectly.
– Tighten the screw connec tion of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–Start not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 11.
– Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
– Safety function active . Programme termination? apage 4.
–(Rinse Stop = no final spi n) selected? apage 3,4.
– Can be opened by emergency release only? apage 1 3.
ʑProgramme does not
start.
–Start or Finish in time selected?
– Washing machine door cl osed?
ʑDetergent solution does
not empty.
–(Rinse Stop = no final spi n) selected? apage 3,4.
– Clean the detergent solution pump apage 11.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault - water below the visible area.
ʑSpin result not
satisfactory.
Laundry wet/too damp.
– No fault - the unbalance d-load detection system interrupted
spinning, uneven laundry distribution.
Distribute large and small items of laundry evenly in the drum.
–Less Ironing selected? apage 5.
– Speed selected too low? apage 5.
ʑThe programme duration
changes during the wash
cycle.
– Not a fault – the programme s equence is optimised for the
particular wash process. This may resul t in changes to the
programme duration in the display field.
ʑDrum spins gently
several times.
– Not a fault - unbalanced-load detection syste m is adjusting the
imbalance.
ʑResidual water in the
compartment 0for care
products.
– Not a fault - the action of the care product is not affecte d.
– Clean the insert if ne cessary apage 10.
ʑOdour formation in the
washing machine.
– R un programme Cottons/Coloureds 90 °C without laundry. Use
standard detergent.
ʑStatus display³t(Wash)
flashes. Detergent may
be leaking out of the
detergent drawer.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into compartment II (not with outdoor or down fabr ics).
– Reduce the detergent dosage for the nex t wash cycle.
ʑLoud spinning, vibrations
and “wandering” during
the spin cycle.
– Are the appliance feet fixed?
Secure appliance feet aInstallation ins tructions.
– Transportation safety de vices removed?
Remove transportation safety device s aInstallation
instructions.
ʑNoises during spin and
drain cycles.
– Clean detergent-so lution pump –> page 10
ʑDisplay panel/indicator
lamps do not function
during operation.
– Power cut?
– Circuit breakers tripped o r fuses blown? Reset the circuit
breakers or change the fuses.
– If the fault occurs repeatedly, call the after-sales service.
ʑProgramme Status
longer than usual.
– Not a fault - unbalanced-load detection syste m is adjusting the
imbalance by repeatedly redistributing the laundry.
– Not a fault - foam detection system active - adds an additional
rinse cycle.
13
What to do if ...
ʑThere are detergent
residues on the laundry.
– O ccasionally, phosphate-free detergents contain water-insoluble
residues.
– Select Rapid 15’ or brush out the laundry after wa shing.
ʑ–Æ– in the display panel. – Start selected.
– To continue the progra mme, press Start.
ʑIn pause mode,
Start flashes very quickly
and a signal sounds.
– Water level too high. No t possible to add more laundry. Close
the washing machine door immediately i f necessary.
– To continue, press the Start bu tton.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme sel ector to Off and remove the mains plug from the socket.
– Turn off the water sup ply and call the after-sales service aInstallation instructions.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is re stored. However, if the laundry has to
be removed, the washing machine door can be opened as follows:
Risk of scalding
The detergent solution and laundry may be hot. If possible, leave to cool
down.
Do not reach into the drum if it is still turning.
Do not open the washing machine door if you can see water through t he
glass.
1. Turn the programme selector to Off and disconnect t he mains plug.
2. Drain the detergent solution apage 1 0.
3. Pull the emergency release dow nwards with a tool and release.
Washing machine door can then b e opened.
After-sales service
ʑIf you cannot remedy the fault yourself (What to do if ..., apage 12 , 13), contact our after-
sales service. We will always find a suitable solution t o avoid unnecessary visits by repair
personnel.
ʑYou will find the contact data for your closest after-sales service in the after-sales service
directory (depending on model).
–GB 0844 8928999 Calls from a BT land line will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.
–IE 01450 2655
ʑPlease give the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machine door*/
opened service flap* and rear of the appliance.
*depending on model
ʑTrust the manufacturer's competence. Turn to us.
You will thereby ensure that the repair s are performed by trained service personnel equipped
with original repair parts.
Instruction manual
Washing
machine
Observe the safety
instructions on
page 8.
Read these instructions and the sepa rate
Installation instructions before operating the
washing machine.
en

1 2
ʑ
cccccccccccccccc
Spin speed
1 - 24 Finish in Programme end after
Status
indicators
Programme Status indicators:
1ü2ce–¯– Wash, Rinse, Spin, End of programme
––– Rinse Stop reached
– Æ– Pause
Programme selector Display panel/
option button/
status indicators
aa
Amount of laundry, level of soiling, water hardness
Pour liquid detergent into the appropriate dispense
Insert for liquid detergent (depending on model), page 10.
Your washing machine Intended use
Contents Page
ʋIntended use ...................................................................................... 1
ʋProgrammes ...................................................................................... 1
ʋSetting and adjusting the programme .......................................... 3
ʋWashing .......................................................................................... 3/4
ʋAfter washing ..................................................................................... 4
ʋIndividual settings ......................................................................... 5/6
ʋOverview of programmes ................................................................ 7
ʋSafety instructions ............................................................................. 8
ʋConsumption values ......................................................................... 8
ʋImportant information ....................................................................... 9
ʋInsert for liquid detergent .............................................................. 10
ʋCare ................................................................................................... 10
ʋInformation on the display panel ................................................. 10
ʋInstructions for blockages ............................................................. 11
ʋWhat to do if............................................................................... 12/13
ʋEmergency release .......................................................................... 13
ʋAfter-sales service ............................................................................ 13
Protection of the environment/Conservation tips
– Always fill the washing machine with a maximum amount of
laundry for the relevant programme.
– Wash normally soiled laundry without a prewash.
– Instead of Cottons/Coloureds 90 °C, select Eco 60 °C and the
Intensive Wash additional function. Comparable cleaning result
with significantly lower energy consumption.
– Measure the detergent according to the manufacturer's
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select the
appropriate spin speed according to the instructions of the dryer
manufacturer.
Preparation a
Compartment ~: fabric softener, starch
Compartment I: Detergent for prewash
ʋFor domestic use only
ʋFor machine-washable fabrics and hand-washable wool
in detergent solution
ʋTo be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines
– Do not leave children unattended near the
washing machine.
– The washing machine is not to be used by
children or persons not familiar with the operating
instructions.
– Keep pets away from the washing machine.
~Correct installation according to the
separate Installation instructions.
Check the machine
– Never use a damaged machine.
– Inform the after-sales service.
Connect the mains plug
– Make sure your hands are dry.
– Take hold of the plug only.
Turn the tap on a¯Æʑʑccʑaʑ
Programmes
Detailed programme overview apage 7.
The spin speed can be selected on an individual basis,
irrespective of which programme is selected and how far
through it is.
Cottons/Coloureds Hard-wearing fabrics
Eco Hard-wearing fabrics
Mixed Fabrics Different types of laundry
Rapid 15’ SuperQuick programme,
also suitable as a rinse programme
Spin Extra spin with selectable spin speed
Empty the rinsing water when is activated
(Rinse Stop = no final spin)
ÿüWool Hand/machine-washable wool
Delicates/Silk Delicate washable fabrics
Easy-Care Easy-care fabrics
a
Congratulations äyou have opted for a modern, high-quality
domestic appliance manufactured by Siemens. This washing
machine is distinguished by its economical water and energy
consumption.
Each machine that leaves our factory is inspected thoroughly to
ensure that it functions properly and is in perfect condition.
For more information on our products, accessories, replacement
parts and services, see our website www.siemens-home.com or
contact our after-sales service centres.
Compartment II: detergent for main wash,
water softener, bleach, stain remover
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
aÿü

3 4
ʑ
cccccccccccccccc
1 - 24 Finish in Programme end after
Programme Status indicators:
1ü2ce¯– Wash, Rinse, Spin, End of programme
– Rinse Stop reached
ÆStart/
Pause
Additional
functions
Sorting and loading the laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7.
Observe the important information apage 9.
Insert items of laundry of varying sizes.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Adding detergent and care products
Measure accordingly:
Amount of laundry, level of soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
During operation: Open the detergent drawer with care.
ʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋBefore washing for the first time
Run a wash cycle without any laundry apage 9
Set and adjust the programme 1
2
Washing
~ʋʋʋ
Dilute thick fabric softener and care products with water.
This prevents blockages.
Detergent drawer
with compartments I, II, ~
Control panel
Washing machine
door handle
Service flap
Washing machine door
Additional functions, option
button and spin speed
aIndividual settings, page 5.
Select Start
Washing
End of programme when ...
... Start flashes and –¯– appears in the display panel.
Cancel the programme
Programmes at high temperatures:
– Cool laundry: Select Rapid 15’.
– Select Start.
Programmes at lower temperatures:
– Select Spin or Empty.
– Select Start.
Change the programme if...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select Start. The new programme starts from the
beginning.
Cancel programme
– Select Start. – Æ– in the display panel.
– if required, add laundry (do not leave the washing
machine door open for too long as water from the
laundry could leak out).
– Select Start.
ʑʑccʑaʑ
All buttons are sensitive and
need only to be touched
lightly. If you press and hold
the Finish in option button for
too long, the appliance
automatically cycles through
the setting options.
3
aÿü Switching off
Turn the programme selector to Off.
Turning the tap off
Not required for AquaStop models aInstallation
instructions, page 7.
Removing the laundry
Open the washing machine door and remove the laundry.
If (Rinse Stop = no Final spin) is active:
Turn the programme selector to Empty or select the spin
speed. Select Start.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can dry
away.
ä
aÿü

5 6
Individual settings
ʑAudible signal
1. Activate the
mode for
setting the
signal volume
Set to º1 step to
the right
Press and
hold +Release1 step to the right
1400
1200
800
400
ccc1400
1200
800
400
ccc
Set to º
Button signals Information signals
Setting the
volume*
* you may need to select the function several times.
1 step to
the right
1400
1200
800
400
ccccc1400
1200
800
400
ccccc
1 step to
the right
Setting the
volume*
2. Set the volume
for ...
1ü2ce¯Æaa
ʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋa~ʋʋʋ~a¯ÆIndividual settings
ʑOption button Finish in
When you select the programme, the relevant programme duration is displayed. You can
delay the start of the programme before it begins. The Finish in time can be set in increments
of one hour up to a maximum of 24 hours. Press the Finish in button repeatedly until the
required number of hours is displayed (h = hour). Select Start. It is not possible to make
adjustments once the programme has started.
ʑSpin speed (rpm) / c(Rinse Stop = no final spin)
You can change the spin speed shown or select c(Rinse Stop = no final spin, laundry
remains in the water after the last rinse, display panel –––). The maximum selectable spin
speed depends on the model and on which programme is currently selected.
ʑAdditional functions aand overview of programmes, page 7
Intensive Wash Extend the washing time for a more intensive washing of heavily
soiled items.
Prewash For heavily soiled items. Prewash at 30 °C.
Less Ironing Special spin sequence with subsequent fluffing. Gentle final spin at
reduced speed. Residual moisture in the laundry is increased slightly.
Extra Rinse Additional rinse cycle. For areas with very soft water or for further
enhancing the washing result.
ʑStart
For starting or interrupting the programme.
aÿü a
ä
aÿü

ʑcccccccccccccccc
1ü2ce¯Æaa
ʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋa~ʋʋʋ~a¯Æʑʑccʑaʑaÿü a
ä
7
Overview of programmes aCheck the consumption values table on page 8 and the instructions on page 9.
The programmes are time-controlled for lightly soiled fabrics. If fabrics are heavily soiled, reduce the load or select an additional function, e.g. Intensive Wash.
Always select the additional Intensive Wash function when washing the maximum load with programmes marked with *.
Regardless of the type of laundry, Easy-Care 40 °C is, as a short programme, best suited to max. spin speed.
Programmes without prewash - add detergent to compartment II, programmes with prewash - distribute the detergent between compartments Iand II.
Programmes °C max. Type of laundry Additional functions; options; information
Cottons/ Coloureds 30, 40, 60, 90 °C 8 kg* Hard-wearing fabrics, heat-resistant fabrics made
of cotton or linen Intensive Wash, Prewash,Less Ironing,Extra Rinse,
(Rinse Stop)
Eco 60 °C Easy-Care 30, 40, 60 °C
3.5 kg*
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics Intensive Wash, Prewash, Less Ironing,Extra Rinse,
(Rinse Stop)
Mixed Fabrics 40 °C Fabrics made of cotton or easy-care fabrics Intensive Wash, Prewash, Less Ironing,Extra Rinse,
(Rinse Stop); different types of laundry can be washed together
Delicates/Silk 30 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
Intensive Wash, Prewash, Less Ironing,Extra Rinse,
(Rinse Stop); spin between the rinse cycles only
ÿüWool cold, 30 °C Hand or machine-washable fabrics made of wool
or containing wool (Rinse Stop);
Particularly gentle wash programme to prevent shrinkage of laundry. Longer programme breaks (fabrics rest in the detergent solution)
Rapid 15’ 30 °C Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
(Rinse Stop);
Short programme, approx. 15 minutes, suitable for lightly soiled laundry or for thorough rinsing (do not add any
detergent)
Additional programmes Spin, Empty
0510/ 9000540548 *540548* WM14P360GB
WM12P360GB
WM14P36SGB
Siemens-Electrogeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland

8
Safety instructions
– Read the Instruction manual and Installation instructions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull on the cable to disconnect the mains plug.
– Only insert/pull out the mains plug with dry hands.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and remove with the plug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– Be careful when emptying hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Additional function Load Electricity
consumption*** Water*** Programme duration***
Cottons/Coloureds 30 °C** Intensive Wash 8 kg 0.61 kWh 80 l 2:12 h
Cottons/Coloureds 40 °C** Intensive Wash 8 kg 0.94 kWh 80 l 2:12 h
Cottons/Coloureds 60 °C** Intensive Wash 8 kg 1.65 kWh 80 l 2:12 h
Eco 60 °C** Intensive Wash 8 kg 1.20 kWh 56 l 3:25 h
Cottons/Coloureds 90 °C Intensive Wash 8 kg 2.73 kWh 97 l 2:12 h
Easy-Care 40 °C** Intensive Wash 3.5 kg 0.55 kWh 53 l 1:12 h
Easy-Care 40 °C**
(also suitable as a
short programme)- 3.5 kg 0.54 kWh 53 l 0:45 h
Delicates/Silk 30 °C - 2 kg 0.20 kWh 39 l 0:40 h
Wool cold - 2 kg 0.08 kWh 40 l 0:36 h
Woolü30 °C -2 kg 0.20 kWh 40 l 0:36 h
* Programme setting for testing and energy labelling in accordance with EU Directive 92/75/EEC.
** Programme setting for testing in accordance with applicable standard EN60456.
Note on comparative tests: When testing the test programmes, wash the specified load using
the maximum spin speed.
As a short programme for coloureds, select the Easy-Care 40 °C programme, using maximum
spin speed.
***The values deviate from the indicated values depending on water pressure, hardness, and inlet
temperature, ambient temperature, type, amount and soiling of the laundry, detergent used,
fluctuations in the power supply and selected additional functions. 8
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn the tap on. Pour into compartment II:
– approx. 1 litre water
– detergent (dosage according to the manufacturer's instructions for light soiling and
according to water hardness)
Turn the programme selector to Easy-Care 60 °C and choose Start.
At the end of the programme, turn the programme selector to Off.
Protecting the laundry and the machine
– When determining the dosage of all washing powders, additives and cleaning agents, you
must follow the manufacturer's instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Loading items of laundry
Insert items of laundry of varying sizes.
Take care not to trap items of laundry between the washing machine door and the rubber
seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash.
Pretreat any stains as necessary. Select Intensive Wash additional
function as necessary.
heavy Do not load as much laundry. Select the program with Prewash.
Pretreat any stains as necessary. Select Intensive Wash additional
function as necessary.
Soaking Load laundry of the same colour.
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's
instructions. Turn the programme selector to Cottons/Coloureds 30 °C and select Start. After
approx. 10 minutes, press Start,to pause the programme. Once the required soaking time
has elapsed, press Start,again to continue the programme, or select a different programme.
Starching Laundry must not be treated with fabric softener.
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the ~
fabric softener compartment in accordance with the manufacturer's instructions (rinse first if
necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel.
Always follow the dye manufacturer's instructions. Do not use the washing machine for
bleaching clothes.
aʑʑʑa¨³±¨³ÅÉa¨³µaa¨´¨´±³¨´a
ʑʑaʑaaaʑʑaaʑʑaaʑʑʑ0aʑʑ³tʑaaʑʑʑʑʑÆʑaaʑaʑʑʑ

ü~
10
Insert for liquid detergent model-dependent
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely apage 10.
– Slide the insert forwards.
Do not use the insert (slide upwards):
– For gel detergents and washing powder
– For programmes with Prewash or the Finish in option
Care
ʑMachine housing, control panel
– Wipe with a soft, damp cloth.
– Remove detergent and cleaning agent residue immediately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert: press the insert upwards from below with your
finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it.
4. Fit the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can
evaporate.
ʑDrum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
ʑDescaling Ensure there is no laundry in the machine
This should not be necessary if the correct detergent dosage has been used. If it is necessary,
however, proceed according to the descaling agent manufacturer's instructions. Suitable
descalers can be obtained via our website or from our after-sales service (apage 13).
Information on the display panel depending on model
¨:³±Close the washing machine door properly; laundry may be caught.
¨:³Å,ÉOpen the tap completely, supply hose kinked or trapped; Clean the filter
apage 11, water pressure too low.
¨:³µDetergent solution pump blocked; Clean the detergent solution pump
apage 11.
Drainage hose/waste pipe blocked; Clean the drainage hose at the siphon
apage 11.
¨:´Water in the base tub, appliance leaking. Call the after-sales service.
¨:´,±³Washing machine door cannot be locked. Open the washing machine door
and close it with an audible "click"; switch the appliance off and on again;
set the programme and make your settings; start the programme.
¨:,´,Motor fault. Call the after-sales service.
Other displays Switch off the appliance, wait for 5 seconds and switch it back on. If the
display appears again, call the after-sales service apage 13.
–Risk of electric shock. Disconnect the mains plug.
–Risk of explosion. No solvents.
11
Information about blockages
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. Take the drainage hose out of the retainer.
Remove the sealing cap, allow the detergent solution to flow out.
Push the sealing cap back on.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller
in the detergent solution pump must be able to rotate).
5. Replace the pump cover and screw it on tightly. The handle points upright.
Replace the drainage hose in the holder.
6. Refit the service flap and close it.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the Empty programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, remove the drainage hose carefully (residual
water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose
clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the AquaStop safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for Spin/Empty).
3. Select Start. Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose from the rear of the appliance.
Remove the filter with pliers and clean.
6. Connect the hose and check for leaks.
Risk of scalding
– Allow the detergent solution to cool down.
– Turn off the tap.
ʑʑaʑaaaʑʑaaʑʑaaʑʑʑ0aʑʑ³tʑaaʑʑʑ
ʑʑÆʑaaʑaʑʑʑ

ü~aʑʑʑa¨³±¨³ÅÉa¨³µaa¨´¨´±³¨´aDisconnect the mains plug.
12
What to do if...
ʑWater is leaking out. – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not dispensed.
–Start not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 11.
– Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
– Safety function active. Programme termination? apage 4.
–(Rinse Stop = no final spin) selected? apage 3,4.
– Can be opened by emergency release only? apage 13.
ʑProgramme does not
start.
–Start or Finish in time selected?
– Washing machine door closed?
ʑDetergent solution does
not empty.
–(Rinse Stop = no final spin) selected? apage 3,4.
– Clean the detergent solution pump apage 11.
– Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
– Not a fault - water below the visible area.
ʑSpin result not
satisfactory.
Laundry wet/too damp.
– No fault - the unbalanced-load detection system interrupted
spinning, uneven laundry distribution.
Distribute large and small items of laundry evenly in the drum.
–Less Ironing selected? apage 5.
– Speed selected too low? apage 5.
ʑThe programme duration
changes during the wash
cycle.
– Not a fault – the programme sequence is optimised for the
particular wash process. This may result in changes to the
programme duration in the display field.
ʑDrum spins gently
several times.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance.
ʑResidual water in the
compartment 0for care
products.
– Not a fault - the action of the care product is not affected.
– Clean the insert if necessary apage 10.
ʑOdour formation in the
washing machine.
– Run programme Cottons/Coloureds 90 °C without laundry. Use
standard detergent.
ʑStatus display³t(Wash)
flashes. Detergent may
be leaking out of the
detergent drawer.
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre of water and pour
into compartment II (not with outdoor or down fabrics).
– Reduce the detergent dosage for the next wash cycle.
ʑLoud spinning, vibrations
and “wandering” during
the spin cycle.
– Are the appliance feet fixed?
Secure appliance feet aInstallation instructions.
– Transportation safety devices removed?
Remove transportation safety devices aInstallation
instructions.
ʑNoises during spin and
drain cycles.
– Clean detergent-solution pump –> page 10
ʑDisplay panel/indicator
lamps do not function
during operation.
– Power cut?
– Circuit breakers tripped or fuses blown? Reset the circuit
breakers or change the fuses.
– If the fault occurs repeatedly, call the after-sales service.
ʑProgramme Status
longer than usual.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance by repeatedly redistributing the laundry.
– Not a fault - foam detection system active - adds an additional
rinse cycle.
13
What to do if ...
ʑThere are detergent
residues on the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues.
– Select Rapid 15’ or brush out the laundry after washing.
ʑ–Æ– in the display panel. – Start selected.
– To continue the programme, press Start.
ʑIn pause mode,
Start flashes very quickly
and a signal sounds.
– Water level too high. Not possible to add more laundry. Close
the washing machine door immediately if necessary.
– To continue, press the Start button.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales service aInstallation instructions.
Emergency release e.g. in the event of a power cut
The programme continues when the power supply is restored. However, if the laundry has to
be removed, the washing machine door can be opened as follows:
Risk of scalding
The detergent solution and laundry may be hot. If possible, leave to cool
down.
Do not reach into the drum if it is still turning.
Do not open the washing machine door if you can see water through the
glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
After-sales service
ʑIf you cannot remedy the fault yourself (What to do if ..., apage 12, 13), contact our after-
sales service. We will always find a suitable solution to avoid unnecessary visits by repair
personnel.
ʑYou will find the contact data for your closest after-sales service in the after-sales service
directory (depending on model).
–GB 0844 8928999 Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.
–IE 01450 2655
ʑPlease give the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Product number Production number
This information can be found:
on the inside of the washing machine door*/
opened service flap* and rear of the appliance.
*depending on model
ʑTrust the manufacturer's competence. Turn to us.
You will thereby ensure that the repairs are performed by trained service personnel equipped
with original repair parts.

ü~aʑʑʑa¨³±¨³ÅÉa¨³µaa¨´¨´±³¨´aDisconnect the mains plug.
ʑʑaʑaaaʑʑaaʑʑaaʑʑʑ0aʑʑ³tʑaaʑʑʑʑʑÆʑaaʑaʑʑʑ
Instruction manual
Washing
machine
Observe the safety
instructions on
page 8.
Read these instructions and the separate
Installation instructions before operating the
washing machine.
en