
Avoid material damage NL
m2
avoid material damage ▶ Make sure that the inner diameter
of the water tap is at least 17
mm.
▶ Make sure that the length of the
thread on the connection to the
water tap is at least 10 mm.
Water pressure that is too low or too high can
interfere with the appliance function.
▶ Make sure the water pressure is on
the water supply system is at
least 100 kPa (1 bar) and at most
1000 kPa (10 bar).
▶ When the water pressure reaches the
exceed the maximum value, a
pressure reducing valve must be
installed between the drinking
water connection and the hose
set of the device.
▶ Do not place the appliance on the mixing
Connect the tap of a pressureless water
heater or boiler.
Modified or damaged water hoses
can lead to material damage and
damage to the device.
▶ Never kink water hoses, pinch
lend, modify or intersect.
▶ Only supplied water hoses
or use original spare hoses.
▶ Never used water hoses
to use.
Use with contaminated or too hot
water can cause material damage
and damage to the device.
▶ Only use the appliance with cold
use tap water. Unsuitable cleaning
agents can damage the surfaces of
the device.
▶ No sharp or abrasive cleaning
using chemicals.
▶ No strong alcoholic cleaning agents
using chemicals.
▶ No harsh scouring or dishwashing
use sponges.
Material damage
avoid
mhuh
avoid material damage
Observe this instruction to avoid
material damage and damage to the
device.
PAY ATTENTION!
Incorrect dosage of fabric softeners,
detergents, care products and
cleaning agents can affect the
functioning of the appliance.
▶ The dosage recommendations of the
keep the manufacturer.
Exceeding the maximum load
quantity affects the operation of the
appliance.
▶ The maximum load
adhere to and do not exceed for
each program.
→
"Programs", Page 25
The device is secured for transport
with transport locks. Transport locks
that have not been removed can lead
to material damage and damage to
the device.
▶ Before commissioning, all transport
remove and retain protections
completely.
▶ For each transport, all transport
Install safety devices completely
to avoid transport damage.
Improper connection of the water
inlet hose can lead to material
damage.
▶ The screw connections on the
water supply hand tight.
▶ The water inlet hose is best
rect without additional
connecting elements such as
adapter, extension, valve or
similar to the water tap.
▶ Make sure that the valve housing
of the water inlet hose is installed
without contact with the
environment and is not exposed to
external forces.
11