Signature S22001 Mounting instructions

2000W
STEAM IRON
MODEL S22001
YOUR SAFETY &
INSTRUCTION MANUAL
PLEASE READ CAREFULLY
www.signaturebrand.co

2
CUSTOMER SUPPORT TEAM: [phone]
TECHNICAL DATA
Description: Steam Iron
Model: S22001
Rated Voltage: 220-240V
Frequency: 50/60Hz
Power consumption: 2000 Watts
DOCUMENTATION
We declare that this product conforms to the following product legislation in accordance with the
following directive(s):
2014/30/EU Electromagnetic Compatibility Directive.
2014/35/EU Low Voltage Directive.
2011/65/EU Restriction of Hazardous Substances Directive.
RKW Quality Assurance, United Kingdom
WARRANTY
This product is guaranteed for 12 months from the date of original purchase. If any defect arises due
to faulty materials of workmanship, the faulty products must be returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
• The product must be returned to the retailer with proof of purchase.
• The product must be installed and used in accordance with the instructions contained in this
instruction guide.
• It must be used only for domestic purposes.
• It does not cover wear and tear, damage, misuse or consumable parts.
• RKW has limited liability for incidental or consequential loss or damage.
• This guarantee is only Valid in the UK and Eire Only.
An extended warranty is available for this appliance.
See back page for details.

3
www.signaturebrand.co
WIRING SAFETY FOR UK USE ONLY
IMPORTANT
As the colours in the
mains lead of this
appliance may not
correspond with the
coloured markings
identifying the terminals
in your plug, please
proceed as follows:
The wires in the mains lead are coloured in
accordance with the following code:
Blue neutral [N] Brown live [L]
Green/Yellow [EARTH]
Plug Fitting Details (Where Applicable).
The wire coloured blue is the neutral and must
be connected to the terminal marked [N] or
coloured black.
The wire coloured brown is the live wire and
must be connected to the terminal marked [L] or
coloured red.
The wire coloured green/yellow must be
connected to the terminal marked with the letter
[E] or marked .
On no account must either the brown or the blue
wire be connected to the [EARTH] terminal .
Always ensure that the cord grip is fastened
correctly.
The plug must be tted with a fuse of the same
rating already tted and conforming to BS 1362
and be ASTA approved.
If in doubt consult a qualied electrician who will
be pleased to do this for you.
Non-Rewireable Mains Plug
If your appliance is supplied with a non-
rewireable plug tted to the mains lead and
should the fuse need replacing, you must use an
ASTA approved one (conforming to BS 1362 of
the same rating).
If in doubt, consult a qualied electrician who will
be pleased to do this for you.
If you need to remove the plug - disconnect it
from the mains - and then cut o the mains lead
and immediately dispose of it safely.
Never attempt to reuse the plug or insert it into a
socket outlet as there is a danger of an electric
shock.
WARNING:
This Appliance MUST be Earthed
FUSE

4
CUSTOMER SUPPORT TEAM: [phone]
PRODUCT SAFETY
When using any electrical appliance, basic safety precautions should
always be followed including the following:
• Check that the voltage of the
main circuit corresponds with
the rating of the appliance before
operating.
• If the supply cord or appliance
is damaged, stop using the
appliance immediately and seek
advice from the manufacturer,
its service agent or a similarly
qualied person.
• DO NOT let the cord hang over
the edge of a table or counter or
let it come into contact with any
hot surfaces.
• DO NOT carry the appliance by
the power cord.
• DO NOT use any extension cord
with this appliance.
• DO NOT pull the plug out by the
cord as this may damage the
plug and/or the cable.
• Switch o at the wall socket
then remove the plug from the
socket when not in use or before
cleaning.
• Switch o and unplug before
tting or removing tools/
attachments, after use and
before cleaning.
• Close supervision is necessary
when any appliance is used by or
near children.
• Children should not play with the
appliance.
• This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand the
hazards involved.
• Cleaning and user maintenance
should not be undertaken by
children without supervision.
• Take care when any appliance is
used near pets.
• DO NOT use this product for
anything other than its intended
use.
• This appliance is for household
use only.
• Please ensure that the appliance
is used on a stable, level, and
heat resistant surface.
• DO NOT immerse cords, plugs
or any part of the appliance in
water or any other liquid.
• DO NOT use the appliance
outdoors.
• The iron should always be
turned to “min” before plugging
or unplugging from the mains
outlet. Never pull the cord to
disconnect from the mains:
instead, grasp plug and pull to
disconnect.

5
www.signaturebrand.co
• Always disconnect the iron from
the electrical outlet when lling
with water or emptying and
when not in use.
• DO NOT leave the iron
unattended when connected
to the mains or on an ironing
board.
• Burns can occur from touching
hot metal parts, hot water or
steam, use caution when you
turn a steam iron upside down-
there may be hot water in the
reservoir.
• Only use normal tap water or
distilled water in this product.
DO NOT use perfumed water
• Never direct steam towards
persons, pets or electrical
systems
• Never obstruct the steam holes
DO NOT place the iron on an
unprotected surface.
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the Customer
Support Team.
HIGH VOLTAGE HOT SURFACE

6
CUSTOMER SUPPORT TEAM: [phone]
WHAT’S IN THE BOX
Instruction Manual
Steam Iron
Measuring Jug
1. Water reservoir
2. Spray nozzle
3. Reservoir lid and lling point
4. Steam control knob
5. Spray button
6. Handle
7. Temperature control knob
8. Temperature indicator
9. Sole plate
1 2 3 4 5 6 7
89
BEFORE YOUR FIRST USE:
1. Remove your appliance from the packaging.
2. Remove any stickers, protective foil or storage cover from the soleplate.
3. Plug the appliance into the mains supply.
4. Your appliance is now ready for normal use.
Dispose of the packaging in a responsible manner.

7
www.signaturebrand.co
USING YOUR APPLIANCE
Filling with water
1. Remove the mains plug from the wall
socket before lling (or emptying) the
iron with water. Set the steam control
to O position in order to avoid the water
leakage.
2. Fill the lling cup with water. Hold the iron
in a tilted position and pour the water into
the water tank to the maximum level.
3. Fill the iron with normal tap water when
using it for the rst time.
4. For relling, you can also use tap water.
However, if the water is very hard, it is
advisable to use distilled water.
5. Do not put vinegar, starch, chemically, de-
scaled water or de-scaling agents in the
water reservoir.
Using the steam jet
1. This function provides an extra amount of
steam to remove stubborn creases.
2. Turn the temperature control to the
position “MAX”.
3. The indicator light turns o when the
required temperature is reached.
4. Press the steam jet button once.
5. Wait a few seconds before pressing the
steam control knob again. When there are
stubborn creases usually all creases can
be removed within three operations of the
steam jet.
Setting the temperature
1. Stand the iron on its end.
2. Insert the mains plug into the wall socket.
3. Set the temperature control to the correct
ironing temperature.
4. After the temperature light rst has gone
out and has come on again, you may start
ironing.
5. The temperature light will come on from
time to time during ironing.
6. If you set the temperature control to
a lower setting after ironing at a high
temperature, please allow time for the iron
to cool. This is to prevent scorching on
your garment.
Steam-ironing
1. Ensure that there is enough water in the
water tank
2. Set the steam control dial to the desired
setting
Min steam setting for temperature • - •••
Max steam setting for temperature •••
3. Water may leak from the sole plate If a too
low temperature has been selected.
4. To use the self clean function of the iron
turn the steam control dial to the solid dot.
Ironing without steam
1. Press the steam control button so that it is
in the down position.

8
CUSTOMER SUPPORT TEAM: [phone]
Cleaning and care
Self cleaning:
1. Set the temperature control to the
maximum position, press the self clean
button for about 1 minute, steam will be
emitted to clean the steam chamber. Use
this function once every two weeks or so.
Anti-calc:
1. The Anti-calc function lters some
minerals from the water to prevent
lime-scale residue build up in the
steam chamber. However if you live
in a particularly hard water area, we
recommend using bottled or distilled
water. Warning: never pour vinegar
or other liquid cleaners for eliminating
calcium into water tank.
After ironing:
1. Disconnect power supply and empty
the water left in the water tank.
Reconnect
the power supply and
disconnect after indicator light goes o,
this dries the soleplate.
2. Let the iron completely cool down, then
wipe akes and any other deposits on the
soleplate with a damp cloth or a non-
abrasive (liquid) cleaner. Clean the upper
part of iron with a damp cloth. Always
store the emptied iron horizontally on a
stable surface with a cloth protecting the
soleplate.
3. When not in use, store the appliance in a
safe, dry place, out of reach of children.
WARNING:
DO NOT IMMERSE ANY PART OF THE
APPLIANCE IN WATER

9
www.signaturebrand.co
Ironing Instructions According to Fabric
Cotton (denim, muslin, calico, chintz): Iron on high heat while
still damp. If the fabric is dry, pre-moistened it with a spray
bottle or use the spray button on your iron to dampen the
fabric. Use steam and spray if necessary
Linen: Iron while still damp on the wrong side using high heat. If
the fabric is dry, pre-moistened it with a spray bottle or use the
spray button on your iron to dampen the fabric
Wool (cashmere, annel): Use a pressing cloth and iron on the
wrong side of the fabric on medium heat
Silk: Use a medium heat setting and dry iron silk on the wrong
side of the fabric. To press silk ties, lay it on top of a pressing
cloth right-side facing down, then press
Polyester: Iron while still damp,
pre-moistened it with a spray bottle or use the spray button on
your iron to dampen the fabric. Use low or medium heat
Nylon: Use low heat and dry iron without steam. Use spray if
necessary
Acetate: Using low heat, dry iron without steam on the wrong
side of the fabric
Acrylic: With the iron on a low heat, dry iron without steam on
the wrong side of the fabric. Use spray if necessary
NATURAL FIBRESSYNTHETIC FIBRES

10
CUSTOMER SUPPORT TEAM: [phone]
NOTES