SIGNIFY EA0815 User manual
Getting Started
1
2
PARTS LIST
In the box you will find:
1 x 55’’ 4K Ultra HD LED LCD TV
1 x Remote control (not pictured)
2 x AAA batteries (not pictured)
2 x Base stands (including 4 x screws)
WHAT YOU WILL NEED
1 x Phillips head screwdriver (for stand installation)
1 x Antenna cable
4
5
3INSTALLATION AND POWER CONNECTION
1. Install the stand (see page 13 of the instruction manual).
2. Connect one end of the antenna cable to the antenna socket of the
TV and the other end to the antenna wall socket.
3. Insert the batteries into the remote control.
4. Connect the TV power cord into the mains power socket
and switch it on.
5. Press the power button located on the lower right
hand side of the TV front panel. The indicator light
will illuminate green and the TV screen will display
the First Time Installation menu.
FIRST TIME INSTALLATION MENU
The on-screen display will contain easy
instructions for setting up the unit (see
page 22 of the instruction manual).
Select the desired Language, Country and
Energy Model by using the
buttons on the remote control. Then press
the OK button on the remote control to
initiate Auto Tuning. The TV will
automatically tune all the digital channels.
AUS
TV
ANTENNA
LEFT
RIGHT
Please refer to the instruction manual for full instructions on how to
operate the Signify® 55’’ 4K Ultra HD LED LCD TV.
Item Code: EA0815
You are now ready to start watching your
Signify® 4K Ultra HD LED LCD TV set.
12 3 4 5 67
8 11
10 129
CONNECTIONS
1. HEADPHONES OUTPUT
2. HDMI1 (supports 4K)
3. HDMI2 (supports 4K)
4. PC AUDIO INPUT
5. VGA INPUT
6. AV INPUT
7. COAXIAL OUTPUT
8. USB INPUT
9. USB INPUT
10. Y/Pb/Pr INPUT (COMPONENT)
11. ANTENNA INPUT
12. HDMI3 (supports full HD 1080p resolution)
/ / /
NOTE: At this stage, TV programming in Australia is not available in 4K
Ultra HD. For instructions on how to watch
4K Ultra HD
see page 52
of
the instruction manual
.
Other manuals for EA0815
1
Table of contents
Other SIGNIFY LCD TV manuals
