10
To Verify Windows Installation
1. Check in Device Manager to verify successful driver
installation.
For Windows 7: Right click Computer, click Manage,
click Device Manager.
For Windows Vista: Right click Computer, click
Manage, click Continue, click Device Manager.
For Windows 2000 / XP / Server 2003: Right click My
Computer, click Manage, click Device Manager.
For Windows Server 2008/ Server 2008 R2: Right click
Computer, click Manage, double click Diagnostics,
click Device Manager.
2. Double click Ports (COM & LPT), PCI Express
UART Port... and PCI Express ECP Parallel
Port...should be displayed.
3. DoubleclickMulti-portserial adapters,PCIExpress
Multiport Adapter should be displayed.
Changing COM Port Number
Some serial devices need a specific COM port in order to
work. If your serial device works properly, do not
change this setting.
1. From the Device Manager window double click
Ports (COM & LPT), then double click the PCI
Express UART Port serial port you want to change.
2. Click Settings tab.
3. Click the down arrow that is next to the COM Port
number box, select a COM port that is not in use,
then click OK.
4. Click OK, then close Device Manager to save the
changes.
