
1. Take out the 2 castors (Fig.1 rear wheel), castor with brake
(Fig.2 front wheel) and 8 M5x10 screws (Fig.3C) from the spare
parts box.
2. This installation requires 2 people, one person to tilt the cabinet
back the other person to assemble the 2 castors with brake
3. Please release brake (Fig.2 front wheel) and assemble the 2
4. Please twist the wheel clockwise and move the cabinet freely.
(Fig.2 front wheel) in the front bottom of the cabinet with 2 M5x10
screws for each wheel.
castors at the back bottom of the cabinet with 2 M5x10 screws
for each wheel.
Please do not put any goods on top of the cabinet
and avoid slanting the cabinet when moving it.
Do not let children climb the cabinet or move the cabinet
to another location.
Please unplug the powercord and release the brake
before moving the cabinet.
door does not swing open.
Push the cabinet from the back when going over slopes
and bumps when moving the cabinet and make sure the
Do not use the cabinet outside when the weather is
bad in order to avoid short circuits.