
7" embedded Touch PC
12 13 14
Accessories
LIEFERUMFANG/COMPONENTS
Inbetriebnahme und Installation
faytech stellt Ihnen eine ausgereifte, qualitativ hochwertige
embedded PC hardware zur Verfügung. Für die
Softwareinstallation, -Nutzung und-Pege ist der jeweilige
Anwender verantwortlich. Gerne prüfen Sie unter
www.faytech.com, ob bereits aktualisierte Treiber vorliegen.
Zum Starten schliessen Sie ihr faytech embedded Gerät mit
dem beiliegenden AC Adapter an eine Stromquelle an oder
nutzen Sie eine entsprechende 12V DC Stromquelle mit
mindestens 5A DC. Um das Gerät zu starten drücken Sie den
On/O Knopf. Anmerkung: für embedded Touch PCs mit einer
Bildschirmgröße von 32” bis 55” ist ein Stromadapter mit 24V
DC out erforderlich.
Fehler vermeiden / Fehler beheben
Falls bei der Nutzung Unklarheiten oder Probleme auftreten,
konsultieren Sie bitte zunächst die ausführliche
Bedienungsanleitung (auf der Treiber-DVD enthalten) Konnte
der Fehler nicht behoben werden, so wenden Sie sich bitte
direkt an uns.
Zubehör
12. 100-240V ACDC active switching Netzteil, 12V DC-Out
13. W-LAN Antenne
14. Kurzanleitung
01. OTG
02. GPIO
03. Sound Ausgang
04. Microfon Eingang
05. HDMI Anschluss
06.10/100/1000MBit
Lan- Anschluss
07. SIM/CARD
08. 2×USB 2.0
09.12DC-IN Schraubbarer
Stromanschlus
01. OTG
02. GPIO
03. Sound Output
04. Microphnoe Input
05. HDMI
06.10/100/1000MBit
Lan-Connector
07. SIM/CARD
08. 2×USB 2.0
09. Screwable 12V DC-IN
power supply
10. COM
11. Screwable W-LAN connector
10. COM
11. Schraubbarer W-Lan Stecker
12. Power Supply
13. W-LAN Antenna
14. Short Installation Manual
copyright t o fay tec h Tec h. Co., Ltd. 2 016
Commissioning and Installation
faytech offers you a well-engineered, high-quality embedded
PC hardware.
For are installause and maintenance the re
user is responsible.
Feel free to check www.faytech.com for updated ers for
your embedded
To start, simply connect your embedded faytech Touch PC to
the included AC adaptor or use an alent power 12V D C
source with at least 5A DC. To start the system press the On/
Off button.
Note: for embedded Touch PC's with a screen size of 32" to
55" a 24V DC out is required.
Troubleshooting
If you encounter problems or ambiguities during the usage, please
first refer to the detailed instruction manual (aailable on the drie
DVD and on www.faytech.com).
In case you are unable to resole the issue this way please contact
us directly.