simplehuman Under counter pull-out can User manual

1. If you want to remove the bucket frame from
the track, pull the frame out as far as it will go.
Find black release levers on the lower sides of
the frame.
2. While pushing down on the right lever and
pushing up on the left lever, pull out frame.
TIP: To make removal of frame from track
easier, get a friend to help.
to remove frame
trash bags
under
counter
pull-out can
commercial grade
right lever
left lever
The under counter pull-out can uses standard tall kitchen bags or
simplehuman can liner code K. Visit www.simplehuman.com for more
information.
simplehuman®
19801 S. Vermont Avenue
Torrance, CA 90502
U.S. Customer Support:
1-888-988-8880
www.simplehuman.com
UK Customer Support:
01491 875 974
www.simplehuman.co.uk

1. Locate area in cabinet for the one-piece
welded track.
NOTE: The track must be located at least 2
inches behind edge of cabinet opening. Do NOT
line up the track to the edge of the door, or else
the frame’s handle will prevent the door from
closing all the way.
2. Hold track in place and fasten the screws.
3. Gently insert the bucket frame into the
one-piece welded track. (Be sure the curved
handle is facing frontward.)
4. Insert the polypropylene bucket into the
bucket support frame.
Your simplehuman® under counter pull-out can is backed by the added
security of a 5-year warranty. For the duration of the warranty,
simplehuman® will repair or replace any defective item free of charge.
Please visit www.simplehuman.com/service to register and for full terms
and restrictions.
warranty
how to install
.comwww.
120-0003-01
contents
one-piece welded
track
bucket support frame one polypropylene
bucket
eight screws
IMPORTANT: DO NOT INSERT THE BUCKET FRAME INTO THE ONE-PIECE
WELDED TRACK UNTIL THE LAST STEP
2"
IMPORTANT