Simpli Home brooklyn + max WyndenHall AXCLRY-08-WHG User manual

Lowry / Mitchell / Fulton
TV Media Stand
Model # AXCLRY-08-WHG
TM
TM
1

2
It's time to register your product warranty.
It's quick and easy. And you'll be happy you did.
simpli-home.com/product-registration
Great quality is a right.
Thank you for shopping with Simpli Home,
America's top brand for high-value furniture.
Activate your 1-year warranty
Automatic entry to win a $500 gift certificate
Earn instant rewards and save
ü
ü
ü

3
Review your product and collect rewards!
Thank you for your purchase! We hope you enjoy it. We’d love
your feedback. Please share a review and get instant rewards!
simpli-home.com/product-review
Share photos and get your cash back!
Send us images or share them on social and qualify for instant
rewards. You may even receive store credit on your entire purchase!
simpli-home.com/share-images

4
For Fastest Customer Service:
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order information and issue.
6. Submit form.
7. A customer service associate will contact you.
Other ways to contact us…
Visit Us
Visit our site directly at
www.simpli-home.com
Email Us
[email protected]
Call Us
1-866-518-0120
Monday to Friday
9am to 5pm EST
*If you’ve purchased from a retailer and you wish to return the product, please
contact the retailer directly.

CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
Safety Information
IMPORTANT : Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
5

This furniture is designed for indoor use.
Damage to furniture can come from temperature changes in relative humidity (RH)
in our homes. Humid air oxidizes metal which results in rusting, corrosion, tarnishing
and roughness. Wood absorbs water as relative humidity rises and falls, and in doing
so it swells and shrinks.
To protect against the humidity effect, the metal is powder coated. The powder coat
layer protects the metal from oxidizing, corrosion, tarnishing and scratching and
keeps it looking good for years to come. The wood is sealed and lacquered to
protect against humidity.
To help protect your furniture, follow these steps:
·Use a humidifier, preferably one with an automatic control system that can
sense the humidity level and adjust itself accordingly
·Dust with soft dry cloth
·Wipe up spills promptly
·Clean with a dry cloth
·Do not use abrasive cleaners, chemical solvents, strong detergents, cleaners
with bleach, and furniture polish
·Use soft felt base coasters, placemats to help prevent scratches
·Keep furniture out of direct sunlight, which can cause cracking or roughness
on the protective layer
·If it can be avoided, do not put furniture near heating vents
·Keep the furniture 3 to 4 inches away from the wall, giving heat and air space to
circulate.
Care & Maintenance
6

WARNING Do not place toys, food, etc. on the top shelves or upper drawers.
Serious injury or death may occur when children climb on furniture. A remote
control or items placed on the furniture may encourage a child to climb on the
furniture and as a result make it top-heavy and cause it to tip over on the child.
WARNING Do not place a TV that exceeds the weight limits or size guidelines
shown in the instructions specified for the furniture. Do not overload shelves
or place heavy items on top shelves or drawers.
Improper use of furniture to support TVs may result in serious injury or death.
WARNING Do not relocate audio and/or video equipment to furniture not
specifically designed to support audio and/or video equipment. Do not move
furniture without shelves or drawers unloaded. Furniture can collapse or tip
over onto a child and cause physical injury or death.
This TV Stand does not come with legible instructions pertaining to the risk of
fire and electric shock that is associated with the use of electrical components
such as operation, user-maintenance, loading, storage and as applicable
electrical issues including grounding or double-insulation.
Any use of this item other than that recommended by the manufacturer in this
manual may cause fire, burns, electric shock and/or serious injuries or death.
WARNING
The maximum diagonal CRT television screen size is 25 inch to 27 inch (63.50 cm to
68.58 cm). For use with televisions weighing 220 lbs or less. Using larger or heavier
televisions may cause instability or tip over which can lead to serious injury or even
death.
The recommended maximum width of the television intended for use is 72 inch
(182.88 cm).
MAXIMUM LOAD 220 LBS MAXIMUM LOAD 25 LBS
7

.A.B
.E
TOP
QTY 1 BOTTOM SHELF
QTY 1 LEFT SIDE
QTY 1
.
L
C
RIGHT SIDE
QTY 1
.
R
C.
L
D.
R
D
LEFT DIVIDER
QTY 1 RIGHT DIVIDER
QTY 1
.F.G
DOOR (L&R Same)
QTY 2 SIDE SHELF
QTY 2
BACK PANEL
QTY 1
.I .H
MIDDLE SHELF
QTY 1
LEG
QTY 2
Warning Label
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front / Avant
Part Description
8
Model # AXCLRY-08-WHGPre-Assembly Information

ALLEN KEY BOLT
M8 x 20 mm
QTY 12
.1.2.3.4
.5.6.7.8
.9.10 .11
ALLEN KEY SCREW
M6 X 30mm
QTY 24
ALLEN KEY
QTY 1
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 20
MAGNET AND PLATE
QTY 2 SETS SHELF SUPPORT
QTY 18
PHILLIPS SCREW
M3 X 15mm
QTY 8
PHILLIPS SCREW
M4 X 15mm
QTY 24
WOOD DOWEL
Ø8 X 30mm
QTY 12
ADJUSTABLE HINGE
QTY 4 SETS
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
.12
.13
LOCK WASHER
Ø12 / Ø8 x 1.5 mm
QTY 12
WASHER
Ø19 / Ø8 x 1 mm
QTY 12
Hardware Description
9
Model # AXCLRY-08-WHGPre-Assembly Information

A
C
L
C
R
D
L
D
R
B
E
E
FGF
I
I
H
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
10
Model # AXCLRY-08-WHGComponents - Key Diagram

Step 1 11
11
D
L
D
R
&
D
L
D R
1. Insert two Dowels 11 into drilled holes on each Left Divider DL and Right Divider DR .
2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
1. Insert four Dowels 11 into drilled holes on Bottom Shelf B .
2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
11
11
11
B
B
Front /
Avant
Front / Avant
Front /
Avant
Front /
Avant
Front /
Avant
11
Model # AXCLRY-08-WHGAssembly

Step 2
4
5
D L
B
B
D
R
D L
D R
B
1. Attach Right Divider DR and Left Divider DL to Bottom Shelf B using six Allen
Key Screws 4 .
2. Use Allen Key 5 to tighten screws. Do not over-tighten.
Front /
Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
12
Model # AXCLRY-08-WHGAssembly

Step 3
C
L
C
R
&
11
C
L
C R
1. Insert two Dowels 11 into drilled holes on each Left Side CL and Right Side CR .
2. Use rubber mallet to tap Dowels 11 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
11
Step 4
1. Attach Bottom Shelf B to Left Side CL using three Allen Key Screws 4 .
2. Use Allen Key 5 to tighten screws. Do not over-tighten.
B
C
L
4
5
4
Front /
Avant
Front /
Avant
Front /
Avant
Front / Avant
Front /
Avant
Front /
Avant
Front /
Avant
13
Model # AXCLRY-08-WHGAssembly

Step 5
B
C
R
4
5
C
R
B
1. Repeat Step-4 for Right Side CR .
Front /
Avant
Front /
Avant
Front /
Avant
Front / Avant Front / Avant
Front / Avant
Front /
Avant
Front / Avant
14
Model # AXCLRY-08-WHGAssembly

Step 6
A
D
R
D
L
C
L
C
R
4
5
4
5
1. Attach Top A to Sides CL , CR using six Allen Key Screws 4
( three Screws / each Side ).
2. Attach Top A to Dividers DL , DR using six Allen Key Screws 4
( three Screws / each Side ).
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
Front / Avant
Front / Avant
Front / Avant
Front / Avant
15
Model # AXCLRY-08-WHGAssembly

Step 7
1
5
I
I
B
B
I
I
1. Attach Legs I to Bottom Shelf B .
2. Use twelve Allen Key Bolts 1 , twelve Lock Washers 2 and twelve Washers 3 to
secure part I and B (six Bolts, six Lock Washers and six Washers on each Leg).
3. Use Allen Key 5 to tighten Bolts. Do not over-tighten.
2
3
P
X
16
Model # AXCLRY-08-WHGAssembly

Step 8
NOTE: The screwdriver is not
included in the hardware pack.
H
H
6
1. Attach the Top Back Panel H to back frame by using Phillips Screws 6 .
Warning Label
Front / Avant
Front /
Avant
17
Model # AXCLRY-08-WHGAssembly

Step 9
10
12
E
E
1. Attach Adjustable Hinges 12 to Doors E using Phillips Screws 10 into guide
holes on Doors E .
18
Model # AXCLRY-08-WHGAssembly

Step 10
D
R
D L
C
L
12
10
C
R
E
E
EE
C
R
C
L
D
L
D
R
1. Attach Adjustable Hinges 12 on Doors E to Sides CL , CR using Phillips
Screws 10 into guide holes on Sides CL , CR .
2. Attach Magnets 7 using Phillips Screws 9 into guide holes on Left Divider DL and
Right Divider DR .
3. Use Phillips screwdriver to snugly tighten screw.
7
9
79
19
Model # AXCLRY-08-WHGAssembly

Tighten the Screw marked II to fasten hinge. The door may need to
be adjusted so that all the spaces between the door and the unit sides are equal.
To adjust, follow instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw .
3. Height adjustment
Loosen screw 10 , adjust door to desired position, re-tighten screw .
IMPORTANT NOTE:
II I
10
20
Model # AXCLRY-08-WHGAssembly