eliving FURNITURE Tate Series User manual

Eliving
Product Code
Dimensions(W x D x H)
TATE-ST-BLACK Side Table
TATE-ST-NATURAL Side Table
450x450x550mm
Important
Please read through instruction carefully
Before assembly and keep for future reference.
For our full catalogue of assembly instructions,
Visit: eliving.com.au/assembly.
Assembly Instructions
Tate Series

Important Tips and Maintenance
1.
Keep children and animals
away from working area as
smaller parts may cause chok-
ing if swallowed.
2.
Never place liquids or anything
damp upon furniture as it
will mark. Ensure a coaster or
running is beneath.
Never use ammonia based
3.
cleaning products as it will
damage the finish.
4.
To avoid fading, keep furniture
out of direct sunlight.
5.
Use a soft or damp cloth(dry
cloth)when wiping or cleaning
surfaces.
6.
Two person are required.
7.
Lay a soft matt down to protect
the furniture piece before and
during assembly.
TATE-ST-BLACK 2

Designed for everyday
TATE-ST-BLACK 3
So your relationship is strong.But is it
strong? Unless you're
furniture can be slightly stressful.We
meditating quietly,pouring
(or slightly less
at a time.If you feel a passive aggressive
coming on,try a compliment
good looking”
flat-pack furniture
an aerospace engineer,assembling
recommend
yourself a herbal tea
herbal wine) and tackling things one step
remark
instead.E.g.“You’re so
This 7-step assembly should take around 1 hour with an
Allen Key - or 30 minutes with and electric drill.
Godspeed.

TATE-ST-BLACK 4
Before Assembly
Tips Before Your Start:
- Remove all wrapping material, including staples & packing straps before you start to assemble.
- DO NOT tighten all screws and bolts until completely assembled.
- Keep all hardware parts out of reach of children.
QUICKFIT
Tighten quickfit until shoulder is flush with panel. Do not overtighten or undertighten.
Panel Panel
Shoulder
CAM LOCK
When fitting cam lock, ensure starting position is correct before you insert connecting quickfit.
Turn cam lock clockwise to tighten.
Quickfit head should be in the centre
of the cam lock when the two panels
are joined.
Cam lock should be inserted before
quickfit.
CORRECT WRONG

Cam Lock Dowel Dowel Cam Lock
φ15mm
Allen Key
4#
Component Hardware
Please check you have all the fittings
part or tools are listed in below.
No. F
No. A No. B No. C No. D No. E
Quantity:20Pcs Quantity:24Pcs
8*28mm
Quantity:20Pcs Quantity:4Pcs Quantity:1Pc
Quantity:4Pc
Screw
M6*50
Foot Pad
8*30mm
φ20
TATE-ST-BLACK 5

1
2
3
33
3
4
4
4
4
Component Panels part List
Please check you have all the panels
are listed below.
1.
2.
3.
4.
TATE-ST-BLACK 6
Table Top
Bottom Panel of Base
Side Panel of Base
Corner Rail of Base
x1
x1
x4
x4

4
A
B
B
A
B
A
B
A
B
A
B
4
4
4
4
3
3
CC
CC
C
C
C
C
STEP 1
Cam Lock
No. C
Quantity:8Pcs
STEP 2
Cam Lock Dowel
8*28mm
No. A
Quantity:16 Pcs
Dowel
8*30mm
No. B
Quantity:24 Pcs
TATE-ST-BLACK 7
x4

C
C
3
3
1
STEP 3
STEP 4
Cam Lock
No. C
Quantity:8Pcs
Cam Lock Dowel
No. B
Quantity:4 Pcs
Cam Lock
φ15mm
Quantity:4 Pcs
8*28mm
No. C
AA
TATE-ST-BLACK 8

F
F
F
F
2
STEP 5
STEP 6
Screw
M6*50mm
Quantity:4 Pcs
Foot Pad
No. F
Quantity:4 Pcs
φ20mm
Allen Key
4#
Quantity:1 Pc
TATE-RDT-BLACK 9
D
No. D No. E

STEP 7
TATE-RDT-BLACK 10

elivingfurniture.com.au
your space and tag us on lnstagram.
Don't forget to share how it looks in
Great job. You're done!