Simpli Home COSMOPOLITAN User manual

COSMOPOLITAN / CITY / ESSEX
72 INCH WIDE TV MEDIA STAND
MODEL # AXCRCOS72-MAH
1/23
SI
M
P
I
I
HOME
L I F E B Y D E S I G N

2/23
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

3/23
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/23
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for
your particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
expand and contract.
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
• If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
• Dust with soft dry cloth.
• Do not use liquid or aerosol products.
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• For soil build-up, wipe with damp cloth & dry.
• Do not use abrasive cleaners.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
5/23
A
TOP
QTY 1
BL
LEFT SIDE
QTY 1
BR
RIGHT SIDE
QTY 1
C
BOTTOM SHELF
QTY 1
D
TOP SHELF
QTY 1
E
CENTRE SHELF
QTY 1
F
TOP DIVIDER
QTY 1
GL
LEFT MIDDLE DIVIDER
QTY 1
GR
RIGHT MIDDLE DIVIDER
QTY 1
Front /
Avant
Front
/ Avant
Front
/ Avant
Front
/
Avant
Front /
Avant
Front /
Avant
Front
/ Avant
Front / Avant
MODEL # AXCRCOS72-MAH

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
6/23
IR
RIGHT SHELF
QTY 1
J
LARGE DOOR (L&R Same)
QTY 2
K
SMALL DOOR (L&R Same)
QTY 2
LL
LEFT BACK PANEL
QTY 1
LR
RIGHT BACK PANEL
QTY 1
L1
TOP BACK PANEL
QTY 1
HL
LEFT DIVIDER
QTY 1
HR
RIGHT DIVIDER
QTY 1
IL
LEFT SHELF
QTY 1
Front
/ Avant
Front /
Avant
Warning Label
MODEL # AXCRCOS72-MAH

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
7/23
PL
LEFT DRAWER SIDE
QTY 1
PR
RIGHT DRAWER SIDE
QTY 1
Q
DRAWER BACK
QTY 1
R
DRAWER BOTTOM
QTY 1
L2
BOTTOM BACK PANEL
QTY 1
M
BOTTOM SUPPORT LEG
QTY 2
N
FLIP DOWN DOOR
QTY 1
O
DRAWER FRONT
QTY 1
MODEL # AXCRCOS72-MAH

PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
8/23
1
ALLEN KEY SCREW
M6 X 30 mm
QTY 34
2
CAM LOCK PIN
CAM LOCK
QTY 22 SETS
3
ALLEN KEY
QTY 1
4
HANDLE
M4 X 25 mm
QTY 6 SETS
5
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 41
6
HINGE
QTY 2
7
MAGNET AND PLATE
QTY 4 SETS
8
SHELF SUPPORT
QTY 12
9
PHILLIPS SCREW
M3 X 12 mm
QTY 28
10
PHILLIPS SCREW
M3 X 15 mm
QTY 16
11
PHILLIPS SCREW
M4 X 25 mm
QTY 8
12
WOOD DOWEL
Ø8 X 30 mm
QTY 22
13
LATCH
QTY 1 SET
14
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25 - QTY 2
( )1 is extra
b. M4 X 15 - QTY 1
c. M4 X 25 - QTY 1
15
PHILLIPS SCREW
M3.5 X 15 mm
QTY 12
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
MODEL # AXCRCOS72-MAH

COMPONENTS – KEY DIAGRAM
9/23
Q
RO
A
BL
L1 F
D
E
N
C
MM
BR
GR
GL
HL
HR
IL
IR
J
J
K
K
PL
PR
L2
LR
LL
F
ro
nt /
Av
ant
Fr
o
nt
/
Av
a
nt
F
r
ont
/
A
va
nt
F
ro
n
t
/ A
va
nt
F
ro
n
t
/ A
va
n
t
F
ro
n
t / A
v
a
nt
Fro
nt
/ A
v
a
nt
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 1
1. Slide Drawer Bottom R firmly into slots on Drawer Sides PL ,PR and Drawer Front O .
STEP 2
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front O .
2. Align Cam Lock Pins with guide holes and attach Drawer Sides PL , PR .
3. Insert 2 Cam Lock 2 into guide holes on each Drawer Side PL , PR .
4. Use flathead screwdriver to secure Cam Locks.
2
O
O
R
10/23
PL
PR
PL
PR
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 3
STEP 4
4
1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front O .
1
3
1. Align Drawer Back Q with Drawer Bottom R and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
3. Use Allen key 3 to tighten. Do not over tighten.
NOTE: The screwdriver is not
included in the hardware pack.
O
11/23
Q
R
O
PL
PR
MODEL # AXCRCOS72-MAH

ASSEMBLY
12/23
1. Insert 6 Dowels 12 into Centre Shelf E .
2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align Dowels 12 with guide holes and attach Middle Divider GL , GR .
STEP 6
1. Attach 6 Cam Lock Pins 2 to Top Shelf D .
2. Align Cam Lock Pins with guide holes and attach Middle Dividers GL , GR .
3. Insert 3 Cam Lock 2 into guide holes on each Middle Divider GL , GR .
4. Use flathead screwdriver to secure Cam Lock.
5. Use 3 Allen Key Screws 1 attach Top Shelf D to Top Divider F .
STEP 5
12
E
E
D
F
1
3
2
GR
GL
GR
GL
Front
/
Avant
Front /
Avant
Front
/
Avant
Front
/
Avant
Front
/ Avant
Front
/ Avant
Front / Avant
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 7
13/23
1. Insert 2 Dowels 12 into each Divider HL , HR & GL , GR .
2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align Dowels 12 with guide holes and attach Bottom Shelf C .
4. Use 12 Allen Key Screws 1 attach Bottom Shelf C to Dividers HL , HR & GL , GR .
E
D
F
2
1. Attach 3 Cam Lock Pins 2 to each Divider HL , HR .
2. Align Cam Lock Pins guide holes and attach Top Shelf D .
3. Insert 6 Cam Lock 2 into guide holes on Top Shelf D .
4. Use flathead screwdriver to secure Cam Lock.
STEP 8
GR
GL
HL
HR
Front
/ Avant
Front / Avant
Front
/
Avant
Front
/ Avant
Front /
Avant
Front / Avant
Front / Avant
Front
/
Avant
Front
/
Avant
Front / Avant
Front /
Avant
GRHR
GL
HL
C
12
1
3
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 9
14/23
1. Insert 4 Dowels 12 into Bottom Shelf C .
2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach 3 Cam Lock Pins 2 to each Side BL , BR .
4. Align Cam Lock Pins with guide holes and attach Bottom Shelf C .
5. Align guide holes on Sides BL , BR with Dowels 12 in Bottom Shelf C .
6. Insert 6 Cam Lock 2 into guide holes on Bottom Shelf C .
7. Use flathead screwdriver to secure Cam Lock.
8. Use 8 Phillip Screws 11 attach 2 Bottom Support Legs M to Bottom Shelf C .
Front /
Avant
Front /
Avant
Front
/
Avant
Front
/ Avant
Front
/ Avant
2
12
11
C
M
M
BL
BR
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 10
15/23
1. Insert 2 Dowels 12 into top corners of each Side BL , BR .
2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align guide holes on bottom corners of Top A with Dowels 12 in Sides BL , BR .
4. Use 15 Allen Key Screws 1 attach Top A to Sides BL , BR , Dividers HL , HR & F .
1
3
12
1
3
C
A
BL
BR
GR
GL
HL
HR
F
Front
/ Avant
Front
/
Avant
Front
/ Avant
Front
/ Avant
Front / Avant
Front /
Avant
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 11
16/23
1. Attach Back Panels LL , LR , L1 , L2 to back of TV stand using Phillips Screws Round
Head 5 into guide holes.
2. Use Phillips screwdriver to tighten screws.
A
L2
L1
LL
LR
Front
/
Avant
Front
/ Avant
5
Warning Label
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 12
17/23
1. Attach hinges on Large Doors J to Sides BL , BR and attach hinges on Small Doors K
to Dividers HL , HR using Phillips Screws 9 into pre-drill holes:
- Using Phillips screwdriver to attach Screws 9 at middle hole of hinges for both top &
bottom hinges.
- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
- Using Phillips screwdriver to tighten the rest of screws 9 into pre-drill holes ( top & bottom
holes on hinges).
2. Attach Hinges 6 to Flip Down Door N and Centre Shelf E using Phillips Screw 15 .
A
N
E
BL
BR
HL
HR
K
K
J
J
First Step Last Step ( after adjust the door )
9
9
9
15
6
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 13
18/23
1. Attach Magnet Plates 7 to bottom corner of Doors J & K using Phillip Screw 10
into pre-drilled holes on Doors J & K .
2. Attach Magnets 7 using Phillip Screws 10 into pre-drilled holes Bottom Shelf C .
3. Attach Latch 13 into pre-drilled hole on Right Middle Divider GR and Flip Down Door N .
4. Use a Phillips screwdriver to attach Handles 4 into guide holes on Doors J , K , N .
10
7
9
13
9
13
4
A
J
K
KJ
C
N
GR
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 14
19/23
1. Use 4 Shelf Supports 8 for each shelf IL , IR in desired location.
2. 2 Shelf Supports 8 may be used on back top of each shelf IL , IR as a tipping restraint.
8
shelf level 1
shelf level 2
shelf level 3
shelf support
anti - tipping
8
IL
IR
MODEL # AXCRCOS72-MAH

ASSEMBLY
STEP 15
20/23
MODEL # AXCRCOS72-MAH
1. Insert assembled drawer into glides on assembled TV