Simpnic SiMP Remote User manual

Quick Installation Guide
SiMP Remote
IRB-01-SW

1. Package Content
2. Get Started
2.1 Preparation
2.2 Installation and Power On
2.3 Pairing
2.4 Reset
3. Basic Settings
3.1 Television (TV) Control
3.2 Air Conditioner (AC) Contro
3.3 Learn Mode
4. FAQ
5. Support

1. Package Content
SiMP Remote
USB Cable
Adapter (5V, 1A)
Quick Installation Guide
Warranty Card
SiMP Remote can only work with SiMP Keeper.
Please make sure you already have SiMP Keeper.
Otherwise SiMP Remote can’t work.

2. Get Started
2.1 Preparation
Get your SiMPNiC SiMP Keeper ready and
download SiMPNiC App in advance.
To make SiMP Remote work, you need to
set up SiMPNiC SiMP Keeper first.Please
refer to SiMPNiC Smart Home Kit Quick
Installation Guide or tutorial in SiMPNiC App.
You can scan QR code below to download
SiMPNiC App from APP Store (iOS) or
Google Play (Android).

2.2 Installation and Power On
SiMP Remote is to control your TV or AC by
IR (Infrared Ray). For maximum functionality,
install it at the optimum spot where its ray can
reach each appliance you want to control.
After you confirm the spot,power on it with
USB cable and adapter. There will be a blue
glimmer spot. If there is no glimmer, refer to
"Reset"section to make it to default settings.

2.3 Paring
Pairing SiMP Remote with your SiMP Keeper in
SiMPNiC App.
If your SiMP Remote is from Home Kit, it’s
already in your SiMPNiC App.
Power on SiMP Remote with USB
cable and adapter. There will be a blue
glimmer spot. If there is no glimmer,
refer to "Reset" section to make it to
default settings.

① Make sure your smartphone is
connected to Home Wi-Fi (2.4GHz).
② Open SiMPNiC App.
③ Select "Room" icon.
④ Select "+" to add device.
⑤ Select "SiMP Remote".
⑥ SiMP Keeper will beep 2 times and
begin searching. The process lasts
about 45 sec(remember to check
LED indicator is blinking during this
period). And then SiMP Remote
will appear in the list.
⑦ If SiMP Remote is not found, select
"Cancel" and search again.

2.4 Reset
If there is no glimmer spot on Smart
Remote, please press the button on
the back for 5 seconds to reset. The
glimmer spot on SiMP Remote will start
blinking (for about 4 minutes). During
this period of time, you can pair it.
Attention:
Once you reset, SiMP Remote will
return to factory default settings. Only
if you want remove it from current SiMP
Keeper, otherwise it’s not suggested to
reset.

3. Basic Settings
3.1 TV Control
3.1.1 Tap "SiMP Remote"and select "Television".
3.1.2 Select "Region"and "Brand"of your television.
3.1.3 Follow "Smart Search"to complete the
setting. It will request you to try several
buttons to make sure SiMP Remote is
compatible with your TV.
3.2 AC Control
3.2.1 Tap "SiMP Remote"and select "Air Conditioner".
3.2.2 Select "Brand"of your air conditioner.
3.2.3 Follow "Smart Search"to complete the
setting. It will request you to try several buttons
to make sure SiMP Remote is compatible
with your AC.

3.3 Learn Mode
If you want to control other home
appliances in addition to TV/AC, you can
use "Learn Mode"to embody buttons of
various remote in SiMPNiC App.
3.3.1 Tap "SiMP Remote"and select
"General Controller".
3.3.2 Select a blank button on screen to learn
a preferred button on your remote
control. For example, tap the center
button on screen, and then you will see
many function buttons in next page.
Select , for instance.
3.3.3 Target your remote control IR emitter at
the receiver (LED indicator glimmer in
blue) of SiMP Remote.

If SiMP Remote learns successfully, "Success"
message will be delivered. If it fails, please try
again.
3.3.4 Please tap "Test"button to make sure
the learning is successful. For instance,
tap and it will turn on / off your TV.
3.3.5 If the test is OK, remember to tap
"done"to save this learning.

Q: Why can’t I find my TV or AC in
SiMPNiC App?
A: If you can’t find corresponding brand
in SiMPNiC App, try "Smart Search"
again. If you still can’t find it,
please feel free to contact us via
[email protected] for help.
Q: Why cannot SiMP Remote control
two or more TVs?
A: This case only happens when TVs
are different models. If they are the
same model, you can use SiMP
Remote to control both of them.
Q: Can I use one SiMP Remote to
control one TV and one AC?
4. FAQ

A: Yes you can! That’s the benefit
of SiMP Remote. You can throw your
regular remotes away and use one
SiMP Remote.
Q: I can’t find my TV/AC brand in the
list, neither can I use Learn Mode
successfully. What can I do?
A: We’re sorry about hearing this.
There are tons of brands, models
of TVs and ACs in the world. We’re
trying as fast as we can to include
all major and necessary brands,
models in our database. If it happens
to your TV or AC, please contact us
via [email protected], we’re
happy to solve it for you.

5. Support
For more product information, FAQ, and
tutorials, please visit SiMPNiC website:
Facebook pageYoutube

For More support, please contact us via
[email protected]

Ver. 201910