- 2 -
2. Cleaned, disassemble components installed, into the amount of water in the tank (the
level must not exceed the maximum level or below the minimum scale) boils once or
several times, to clean the water pipes and other internal parts
3. Boil water, open the cover, the amount of water (the level must not exceed the maximum
level or below the minimum scale), after inserting and close the cover
4. Make coffee, boil water before open the cover, the amount of installed right amount
of coffee into the filter cup, and cover the lid
5. The glass pot on the insulation board , plug in the power , turn the power switch (
indicator light ) , boils finished, automatically enters the insulating state ,if no need keep
warm , you can put the power switch is turned off (indicator turns off ) , and unplug
6. When all of coffee inflow the glass pot, you can take out the glass pot , put the coffee
into the cup and enjoy it
7. If you do not drink coffee finished, you can put insulation board insulation .If you do
not want insulation, please turn off the power switch and unplug
8. If you just completed the coffee, but you want make coffee again, please intervals few
minutes, the thermostat need reset, and then continue
9. When your coffee tasting is completed, do not make more coffee, clean the detachable
component (cup, filter cup, glass pot, measuring spoons) and the body
10. Regular cleaning and maintenance
* NOTE matters:
Please read the detailed instructions before use, and note the following:
1. Before use to ensure that the same supply voltage and the rated voltage of the product
indicated.
2. During the heating process or just when the power is off, do not touch the insulation
board and glass pot, avoid high-temperature burns.
3. Please do not put the machine, the power cord and plug immersed in the water or
other liquid, avoid the risk of electric shock and damage the product.
4. When do not use it, turn off the power and reversed except the power plug, wait for
insulation panels and glass pot completely cold before cleaning.
5. If the power cord, plugs and other electrical components damaged, please stop using,
in order to avoid the risk of electric shock, and sent to the designated point of inspection
maintenance and repair, may continue to be used after repair.
6. In the course of heating: * please do not let children play or near power lines; *If some
problems, please unplug ASAP; *heated liquid spills carefully to avoid burns.
7. This produce just for home or office
* Care and Maintenance:
1. Do not put the product in the water or other liquids for cleaning
2. When do not use it, turn off the power and reversed except the power plug, wait for
insulation panel sand glass pot completely cold before cleaning
