Sincreative CM5700A-UL User manual

User Manual
love · life
Model: CM5700A-UL
life style
www.sincreative.com

Contents
Scope of delivery.....................................................................1
Device parts.............................................................................2
Scope of delivery/Device parts...............................................3
General.....................................................................................4
Read and keep operating instructions..........................................4
Explanation of symbols............................................................5
Safety........................................................................................6
Intended use.........................................................................................6
Safety instructions.............................................................................7
Prior to initial use...................................................................14
Unpacking...........................................................................................14
Prepare grinding mechanism........................................................16
Flush the water system.....................................................................18
About the grinder...................................................................21
About the pressure gauge.....................................................22
Use..........................................................................................24
Degree of grinding pre-selection................................................24
Prepare espresso..............................................................................25
Empty brewing filter..........................................................................29
Prepare cappuccino / froth milk..................................................29
Hot water function............................................................................32
Empty drip tray..................................................................................32
Change water quantity for coffee preparation.......................33
Water tank empty.............................................................................34
Switch off espresso machine.........................................................34
Cleaning.................................................................................35
Cleaning the grinding mechanism.............................................36
Clean brewing filter..........................................................................38
Cleaning during daily use..............................................................38
Clean steam nozzle / hot water nozzle.....................................38
Descale espresso machine....................................................39
About descaling / About exsiccosis......................................41
Storage...................................................................................42
Faults and rectification..........................................................43
Technical data.......................................................................46
Disposal..................................................................................46
Dispose of packaging and appliance.......................................46

Scope of delivery
Scope of delivery
1
ON/OFF
HOT-WATER
SINGLE DOUBLE

Scope of delivery
Device Parts
2
ON/OFF
HOT-WATER
SINGLE DOUBLE

Scope of delivery/Device parts
Scope of delivery/
Device parts
3
Coffee bean container
with lid
Water tank
Tamper
Large brewing filter
Small brewing filter
Filter holder
Cleaning needle
Cleaning brush
Coffee spoon
Drip tray
Emptying display
Draining rack
Coffee grinder button
Filter holder bracket
Coffee distributor
Degree of grinding
pre-selection
Grinding mechanism
Standby display
ON/OFF button
HOT WATER button
Pressure indicator(bar)
Button for single espresso
Button for double espresso
Steam volume regulator
Filter holder bracket
Steam nozzle /
hot water nozzle
Grinding process switch
Opening in the
draining rack
Release button

General
General
Read and keep operating instructions
4
Read and follow these original operating instructions completely
before using the appliance, particularly the safety instructions, and
keep them, in case you would like to read about something later on.
Failure to comply with these operating instructions can lead to
serious injuries or damage to the espresso machine and the
integrated grinding mechanism.
If you pass the product on to third parties, please also ensure that
you pass on these operating instructions.
These operating instructions can also be downloaded as a PDF file
from our website www.sincreative.com
Dear customer,
Thank you for deciding to purchase this product. We hope that you
like it and enjoy using it.
Please take the time to study the espresso machine with integrated
grinder.
So far, no one has ever been born a master barista.
The diverse options for espresso preparation require a certain
amount of willingness to experiment.
In these original operating instructions, we have described exactly
how you can use the product optimally and safely. We hope that you
enjoy it!

Explanation of symbols
Explanation of symbols
5
The following symbols and signal words are used in these operating
instructions, on the product or on the packaging.
Indicates a hazard with moderate risk, which can
lead to death or severe injury, if it is not avoided.
Property damage can occur if not observed.
Hot surface! This symbol identifies hot surfaces in opera-
tion-do not touch with bare hands.
Indicates information and explanations.
Suitable for contact with food.
Protection class I / : Electrically conductive housing parts
connected to protective conductor.

Safety
Safety
Intended use
6
• The espresso machine is exclusively designed for the preparation
of household quantities of coffee/espresso and for frothing milk
using steam. Only cold still water should be used to fill the water
tank. You can also use cold still filtered water to fill the water tank.
This is recommended, if the mains water has a high degree of
hardness.
The grinding mechanism is for grinding the roasted whole coffee
beans and is only suitable for private households. It can only be
used for grinding coffee beans, not for grinding or chopping other
food.
• The machine is exclusively intended for household use and is not
suitable for commercial or household-like use in kitchens for
employees or shops, offices and other commercial areas, in
agricultural premises, by customers in hotels, motels or other
residential facilities or bed-and-breakfast establishments.
• The appliance may only be used with the included accessories.
• Any other use is regarded as inappropriate and may lead to
material damage or even to personal injury. The appliance is not a
toy.
• The manufacturer or retailer shall not assume any liability for
losses caused by inappropriate or improper use.

Safety
Safety instructions
7
Hazards for children and persons with impaired
physical, sensory or mental capabilities (e.g. partially disabled,
elderly persons with impairment to their physical and mental
capabilities) or a lack of experience and knowledge
(for example, older children).
• This espresso machine may be used by persons with reduced
physical, sensory or mental abilities or lacking experience and
knowledge, if they are under supervision or after receiving
instruction on safe use of the espresso machine and have
understood the resulting hazards. Children must not play with the
espresso machine. Cleaning and user maintenance may not be
performed by children.
• Keep children away from the espresso machine and the power
cable.
• The grinding mechanism must not be used by children.

Safety
Hazard from electricity
8
• Do not leave the espresso machine unattended during operation.
• Do not let children play with the packaging film. Children may
become caught in it while playing and suffocate.
Electric shock hazard! The appliance operates
with hazardous voltage. Faulty electrical
installation or mains voltage that is too high may lead to electric
shock.
A frequent cause of household accidents is a lack of attention
during routine activities. Ensure that your hands are always dry
when connecting/disconnecting the mains plug or when
operating the appliance.
• Only use the espresso machine in dry, interior spaces.
• Never store the espresso machine such that it may fall into a tub
or sink.
• Never reach for an electrical device, if it has fallen into water. In
such a case, immediately disconnect the power plug.
• Ensure that children do not insert items into the espresso machine.
• Only connect the espresso machine, if the mains voltage of the
socket matches the specification on the rating plate.
• The power cable, the power plug and the appliance must not be
exposed to dripping or splashing water.

Safety
9
• Do not operate the appliance outdoors and do not expose it to
weather influences, such as rain, snow or frost.
• Never immerse the appliance or the power cable into water or
other fluids.
• When using an adapter plug or extension cord, these must comply
with the valid safety regulations. The specified maximum voltage
must not be exceeded.
• The ON/OFF button does not disconnect the espresso machine
from the power supply. Only connect the espresso machine to an
easily accessible socket, so that you can disconnect it from the
power supply quickly in case of a malfunction.
The filling aperture must not be opened during
use. The heating element surface is subjected to residual heat
after use. Care shall be taken when handling the cutting blades,
emptying the coffee bean container and during cleaning.
• Switch the espresso machine off before filling the water tank and
remove the power plug from the socket.
• Lay the power cable so that it does not become a trip hazard.
• Do not kink the power cable and do not lay it over sharp edges.
• Do not use the appliance:
- if the appliance is damaged,
- if the power cable or power plug are damaged,
- the device has fallen.
- if the coffee bean container is not inserted and engaged,
- if the grinding mechanism is not installed and engaged,
- if the complete drip tray with the rack is missing.
• Prior to each use, pull the power cable completely out of the
appliance. Ensure that the power cable cannot be trapped, crushed
or damaged by sharp edges or hot items.

Safety
10
• Remove the power plug from the socket:
- if you are not using the appliance,
- before cleaning or putting the appliance away,
- if an obvious fault occurs during operation,
- in a thunder storm.
Always pull on the power plug, not on the power cable.
• Do not make any modifications to the appliance or the power
cable.
• Only allow repairs to be carried out by a professional workshop.
Also please note the guarantee conditions (see guarantee card).
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
• Do not open the enclosure, leave the repair to specialists, in order
to avoid endangering the user. For this, please contact a specialist
workshop.
Liability and warranty claims are excluded for repairs that are
carried out independently, improper connection or incorrect
operation.
• Parts may only be used for repairs, which correspond to the
original device data. Electrical and mechanical parts are in this
espresso machine, which are essential for protection against
hazard sources.
• The appliance must not be connected to a time switch or other
separate remove activation system, such as a dimmer switch or a
remote-control socket.

Scope of delivery
Scope of delivery
11
Scalding hazard!
Hot water/hot steam escapes from the espresso machine
during use. Parts of the espresso machine become very hot.
You may scald yourself.
• Before each time the espresso machine is switched on, turn the
steam volume regulator to OFF. Otherwise, hot water/hot steam may
unintentionally escape from the steam nozzle/hot water nozzle.
• Only hold the steam nozzle/hot water nozzle on the black plastic
handle to fold it out and in. During frothing and also afterwards, you
should not touch the steam nozzle/hot water nozzle.
• Always align the steam nozzle/hot water nozzle after use, such
that the nozzle points towards the opening in the draining rack .
• Only use the steam nozzle/hot water nozzle very carefully and
never direct it towards parts of the body.
• Do not touch the coffee spout during operation and do not reach
underneath it.
Injury hazard!
The grinding mechanism has sharp edges. Never insert fingers,
parts of cutlery or other items into the grinding mechanism.
• Always disconnect the appliance from the power supply, if it is
unsupervised and prior to assembly, dismantling or cleaning the
grinding mechanism.
• Switch off the appliance and disconnect from supply before
changing accessories or approaching parts that move in use.

Safety
12
• Do not release the filter holder while the machine is running: Hot
water may spray out. The filter holder must be turned as far as it will
go.
• Allow the filter holder to cool off completely before changing the
inserted brewing filter.
• Please note that hot steam may also escape from the espresso
machine after it has been switched off.
• Do not overfill the filter holder with ground coffee, otherwise the
filter holder cannot be mounted correctly. This may cause hot steam
to escape from the side.
• The drip tray and the draining rack must always be in
position during operation. Depending on the operating state, steam
and hot water can end up in the drip tray. The related valve is
situated invisibly in the rear section above the drip tray.
Caution - property damage
Improper handling of the espresso machine may lead to damage
to the espresso machine.
Only adjust the degree of grinding levels in the
direction of "finer''(15 -> 1) during the grinding
• Please do not overfill the bean container, the lid should still be able
to close.
• Do not regrind ground coffee.
• Never fill hot or carbonated water into the water tank.
• Never operate the espresso machine without water, as otherwise
the pump may become damaged.
process.

Safety
13
• Protect the espresso machine from frost: Water residues may
freeze at temperatures below 32 °F and damage the heater.
• Place the appliance on a sturdy and level surface. In doing so,
ensure that there is a sufficient distance to strong heat sources, such
as hot plates, heating pipes, inter alia.
• Avoid a heat accumulation and position the appliance so that
heat and steam can escape all around the enclosure during use.
• Do not move the appliance while it is in operation, in order to
avoid injuries. Before relocating the appliance, leave it to cool off.
• Hold the appliance underneath to carry it. For this, tilt is slightly to
the side and hold underneath the appliance with at least one hand.
Do not hold onto the water tank, as it releases upwards.
• Rubberised feet are situated on the underside of the appliance. As
furniture and/or storage surfaces are made of various materials and
are treated with various care products, it cannot be entirely ruled
out that some of these substances may contain components, which
attack and dissolve the rubber feet. If necessary, place a non-slip
base under the device.
• Do not use any aggressive chemical detergents, abrasives, hard
sponges or similar for cleaning.
• Handling the high-quality and weighty filter holder requires
getting used to. Therefore, avoid releasing the filter holder with a
swinging movement.
Prepare yourself for the weight already before releasing it and use
slight upward pressure, so that the filter holder does not fall out of
the bayonet bracket and hit the enclosure.

Prior to initial use
Prior to initial use Unpacking
14
Risk of damage!
If you open the packaging without due care and attention using a
sharp knife or other pointed objects, the appliance may become
damaged.
1. Remove the appliance and accessories from the packaging.
2. Carefull remove all packaging material (also a cover underneath
the water tank) and pull the power cable completely out of the
compartment on the back.
3. Check whether the delivery is complete (refer to Fig. A).
4. Check whether the espresso machine or individual parts are
damaged. If this is the case, do not use the espresso machine.
Contact the manufacturer via the service address stated on the
warranty card.
5. Before using the appliance for the first time, check whether the
voltage specification on the rating plate corresponds to that of your
household.
6. Clean the appliance with a slightly dampened cloth prior to initial
use, in order to remove possible packaging and production
residues.
Rinse off the following parts under flowing water prior to first-time
use:
- Water tank and lid
- Filter holder and filters /
- Tamper

Prior to initial use
15
Wipe the parts dry and let them dry off completely.
Only wipe off the double-wall coffee bean container damply, do not
immerse in water.
The grinding mechanism does not need to be cleaned separately
prior to initial use. After use, also only clean in a dry state, using a
brush.

Prior to initial use
Prepare grinding mechanism
16
1. Ensure that the steam controller is switched to OFF and
disconnect the power plug, if necessary.
The grinding mechanism is removed for transport. Attach the
grinding mechanism, as described in the Cleaning the
grinding mechanism section, Point 8.
2. Turn the coffee bean container clockwise onto the mount, as
illustrated.
3. Hang the filter holder bracket onto the mount by lifting it
slightly and push the mount downwards.
4. Push the brewing filter ( or ) into the filter holder.
5. For the first grinding process, fill 2-3 tablespoons of coffee beans
into the coffee bean container and put the lid on.
6. Connect the power plug to a socket. A beep tone sounds.
ON/OFF
HOT-WATER
ON/OFF
HOT-WATER
SINGLE DOUBLE

Prior to initial use
17
7. Press the ON/OFF button. The grinding mechanism standby
indicator lights up.
Initially ignore the buttons lighting up.
8. Turn the degree of grinding pre-selection to the right to level
15 (the setting mark is above the scale from 1 to 15).
9. Pick up the filter holder and push it straight into the filter
holder bracket .
The grinding process is activated with filter holder. For this, push it
slightly forward horizontally against the switch .
The grinding process can be interrupted at any time. For this,
this, pull the filter holder back slightly in the filter holder
bracket.
SINGLE DOUBLE
10. Let the grinding process run through until all of the beans are
ground and then pull the filter holder out of the bracket. Please
dispose of the coffee grounds.
11. Press the ON/OFF button and remove the power plug from the
socket.

Flush the water system
Prior to initial use
18
Prior to initial use and after a longer period of disuse of the
espresso machine, allow the contents of approx. 2-3 cups of
water to run through the machine. This will clean the water circuit
and all parts will be heated up.
During initial use, it may occur that the pump makes slightly louder
noises. That is normal. After a short time, the system has filled with
water and the noise will become quieter.
The lid of the water tank can be folded forward and backwards
and can also be used for holding the tank when inserted.
1. Ensure that the steam controller is switched to OFF and
disconnect the power plug, if necessary.
2. Fill fresh, cold and still water into the tank. Pay attention to the MIN
and MAX filling marks:
3. Insert the water tank by first holding it flush against the back of
the espresso machine and then let it slide downwards, until the
contour is flush with the machine. Flip the lid down.
4. Insert the drip tray with the draining rack .
5. Install the unfilled filter holder . For this, align it to the left with
the handle at the front, then move it horizontally upwards into the
filter holder bracket and turn it to the right as far as it will go.
6. Align the steam jet/hot water jet with the opening in the
draining rack .
7. Connect the power plug to a socket. A beep tone sounds.