SINO V - X500 User manual

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn
Sino V – X500
GSM/CDMA GATEWAY
User Manual
To reduce the ris of fire, electric shoc and /or personal injury, please read this manual before using
this unit.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn
CONTENT
1 INTRODUCTION ........................................................................................... 1
. Overview...............................................................................................................
.2 Glossary................................................................................................................
2 EQUIPMENT INFORMATION ....................................................................... 2
2. Appearance .......................................................................................................... 2
2.2 Hardware .............................................................................................................. 2
2.3 Software................................................................................................................ 3
2.4 Function and Features ......................................................................................... 3
3 EQUIPMENT INSTALLATION ...................................................................... 3
3. Network Setup ...................................................................................................... 4
3.2 Equipment IP Address.......................................................................................... 4
3.3 Equipment Connection ......................................................................................... 4
3.4 LED Indicators ...................................................................................................... 5
4 WEB SETTINGS ........................................................................................... 5
4. Login ..................................................................................................................... 5
4.2 Basic Settings....................................................................................................... 6
4.3 SIP Protocol.......................................................................................................... 7
4.4 GoIP Settings ....................................................................................................... 9
4.4.1 Port Settings................................................................................................... 9
4.4.2 IMEI Settings................................................................................................ 11
4.4.3 SMS Operation............................................................................................. 13
4.4.4 Lock/Switch Card ......................................................................................... 14
4.4. AT Command ............................................................................................... 17
4.4.6 Billing............................................................................................................ 18
4.5 Application Settings............................................................................................ 2
4. .1 Phone Book.................................................................................................. 21
4. .2 Dial Pattern .................................................................................................. 22
4. .3 Dial Prefix Manipulation ............................................................................... 23
4. .4 Local Billing.................................................................................................. 23
4.6 Advanced Settings.............................................................................................. 24
4.6.1 Network ........................................................................................................ 24
4.6.2 Voice and Codec.......................................................................................... 2
4.6.3 Analog Port .................................................................................................. 27
4.7 System Settings.................................................................................................. 29
4.7.1 User Management........................................................................................ 30
4.7.2 Remote Management................................................................................... 31
4.7.3 System Update............................................................................................. 32
4.8 Running Status ................................................................................................... 33
4.8.1 Port Status.................................................................................................... 33
4.8.2 Call Status.................................................................................................... 34
4.8.3 System Status .............................................................................................. 3
4.8.4 Call Statistics................................................................................................ 3
4.9 Save and Reboot................................................................................................ 36
5 TYPICAL USED SCENARIO....................................................................... 37
5. Landing from IP to Mobile Network.................................................................... 37
5.2 Access from Mobile Network to IP ..................................................................... 38

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn
6 FAQ ............................................................................................................. 39
6. How to designate a port for outbound call ......................................................... 39
7 APPENDIX 1 ............................................................................................... 40

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn
1 Introduction
1.1 Overview
A VoIP GSM Gateway (GoIP Gateway) is a device which reduces costs when
calling from a fixed telephone line to mobile network. It enables direct routing
between IP, digital, analog and mobile networks.
GoIP Gateway is now used more and more for telephone carriers to land their IP
calls to mobile network. In those areas where fixed line services are unavailable
or much more expensive than the mobile cost, GoIP Gateway is an irreplaceable
alternative.
The following figure shows a basic topology of GoIP Gateway usage.
Figure .
1.2 Glossary
VoIP: Voice over Internet Protocol.
SIP: Session Initial Protocol.
DTMF: Dual Tone Multiple Frequency.
IMEI: International Mobile Equipment Identity.
LCR: Least Cost Routing.
USSD: Unstructured Supplementary Service Data.
GSM: Global System Communications.
CDMA: Code Division Multiple Access.
WCDMA: Wideband Code Division Multiple Access.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 2
2 Equipment Information
2.1 Appearance
The following figure shows the front view of SinoV GoIP Gateway.
Figure 2. : Front View
The following figure shows the rear view of SinoV GoIP Gateway.
Figure 2.2: Rear View
2.2 Hardware
The following table shows the hardware information for SinoV GoIP Gateway.
CPU KSZ 8695
Memory
Media DSP
Power Supply 00-240V AC, 50 ~ 60 Hz
Module: GSM/CDMA/WCDMA serials
LAN/WAN
Serial Port

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 3
Antenna
Card Slot
Dimensions
 Rack mountable U chassis(compatible with 9’’ Rack)
 Width: 482mm
 Height: 44mm
 Depth: 2 0mm
Weight 2.5 kg
Working
Environment
 Temperature: 0 ~ 50 ℃
 Humidity: 0% ~ 90%
2.3 Software
The following table shows the software information for SinoV GoIP Gateway.
OS Embedded Linux OS
Web Server Built-in Http Server
Firmware
SIP Client
DHCP Client
DHCP Server
PPPoE
2.4 Function and Features
This chapter introduces the overall function and features of SinoV GoIP
Gateway.
 Hot-line call
 Dial pattern
 Dial prefix manipulation
 Phone book
 CDR
 White list
3 Equipment Installation
This chapter describes how to install a new GoIP Gateway to a physical network
environment, how to initialize it and start it in a proper way.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 4
3.1 Networ Setup
Network is a prerequisite to install GoIP Gateway. The following figure shows the
topology of LAN with a VoIP Gateway connected.
LAN
Note: WAN Port will be used to connect GoIP Gateway to the LAN .
3.2 Equipment IP Address
The default IP of GoIP Gateway WAN port is 92. 68. .67, while the default
LAN port IP is 92. 67. . .
3.3 Equipment Connection
Follow the steps below to install the GoIP Gateway to LAN.
) Fix the antenna to the GoIP Gateway. (Optional)
2) Insert SIM card(s) to slots.
3) Connect an Ethernet Cable to the WAN port of GoIP Gateway. The other end
of the Ethernet Cable should be connected to LAN route or switch.
4) Connect an Ethernet Cable to the LAN port of GoIP Gateway. The other end
of the Ethernet Cable should be connected to PC or other network device.
(Optional)
5) Plug in the GoIP Gateway.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 5
3.4 LED Indicators
There are a set of LED lights in the front of GoIP Gateway. Lights will be on or
glittering when the GoIP Gateway is power on and running. The following table
describes various meanings of status corresponding to LED lights in different
display color.
Power It indicates whether the system is running or not.
Run x
SW x
4 Web Settings
This chapter describes how to set up GoIP Gateway through Web Page. There
is a built-in web server which can be accessed at URL: http://GATEWAY_IP/,
while GATEWAY_IP is the WAN IP address of the GoIP Gateway, such as
92. 68. .67.
As an example, the following introduction will base on the GoIP Gateway with
WAN IP 92. 68. .67.
4.1 Login
Open web browser and access URL http:// 92. 68. .67/. The default login page
will be displayed as following.
The default login account and password are:
Account root
Password root

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 6
It is recommended to use IE or FireFox to access the web pages. After
successfully logged in, the main page to set Gateway is as following:
4.2 Basic Settings
Basic Settings will be described in this paragraph. The most frequently modified
parameters and most of the individual parameters are listed in this page.
SIP Server Settings is for SIP communication with IP network. Fields are
specified as following:
 Protocol Mode: Specify SIP client working mode. Option values are
Registration/Point-to-Point. If set to Registration, SIP client will send
registration messages to SIP server.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 7
 Encryption Method: Specify the encryption method for messages between
SIP server and SIP client.
 SIP Server IP: Specify the IP of SIP server.
 SIP Server Port: Specify the port of SIP server.
 Phone Number: Specify the caller phone number for SIP client. It can also
be regarded as the SIP port number which can be called.
 Account: Specify the SIP account for registration.
 Password: Specify the SIP password for registration.
Note: The settings of Phone Number, Account and Password are globally active. They will
apply to all SIP ports settings in SIP Protocol page.
4.3 SIP Protocol
SIP Protocol Settings will be described in this paragraph. It mainly targets to set
up parameters related to SIP server, SIP account and SIP password for SIP
registration.
The screenshot below shows the operation mode to set SIP running parameters.
Fields are specified as following:
 Protocol Mode: It is the same as that in Basic Settings. The modification
here will also apply to Basic Settings page.
 Encryption Mode: It is the same as that in Basic Settings. The modification
here will also apply to Basic Settings page.
 SIP Server: Specify the domain or IP of the SIP Server.
 SIP Server Port: Specify the port of the SIP Server.
 Primary Proxy IP: Specify the primary proxy IP.
 Secondary Proxy IP: Specify the secondary proxy IP.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 8
 Expiration Period: Specify the expiration period for registration.
 Local Port: Specify the local port used to register to SIP server.
 Multiple Port Support: Specify whether support to register to SIP server with
different SIP Account.
 Phone Number Registration: Specify whether enable phone number
registration or not. If set to Enabled, the Phone Number and Account can be
different when registering to SIP Server. If set to Disabled, the Phone
Number must be the same as the Account when registering, otherwise, the
registration will fail.
 Receive All Call: Specify whether enable to receive all calls or not.
The screenshot below shows the operation mode to SIP Accounts.
If a default Phone Number, Account and Password is already set in Basic
Settings page, all the inputs here can be left empty and the default setting will
apply to all the SIP accounts. For example, if an account GOIP-03 is set with
password 888888 in Basic Settings page and all the SIP accounts here are left
empty, the combination of GOIP-03 and 888888 will be used for all SIP accounts
to register to SIP Server.
There are two ways to overwrite the default SIP account setting in Basic Settings
page.
) Assign an account and password to Port and leave empty for other Ports.
Settings of Port can also be applied to all the other Ports automatically.
This is for short to set Account and Password if all the Ports use the same
value.
2) Assign account and password to certain Port(s). The value of account and
password can be various. In this scenario, only the Ports assigned with
account and password will register to SIP Server.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 9
4.4 GoIP Settings
GoIP settings include:
 Port Settings
 IMEI Settings
 SMS Operation
 Lock/Switch Card
 AT Command
 Billing
These sub topics will be introduced separately below.
4.4.1 Port Settings
The screenshot below shows the operation mode to set GoIP port properties.
The columns are specified as following:
 Port No: The GoIP Gateway mobile port. Each port contains one or more
card slots. Port No starts from to 8.
 Mobile Base: Specify the mobile base.
 Provider: Specify the provider.
 Input Volume: Specify the input voice volume of this port.
 Output Volume: Specify the output voice volume of this port.
 IMEI: Specify the IMEI of this port. Any card in this port will use this specified
IMEI to communicate with mobile base.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 0
The screenshot below shows the operation mode to set GoIP port application
feature.
The columns are specified as following:
 Port No: The GoIP Gateway mobile port. Each port contains one or more
card slots. Port No starts from to 8.
 Main Access: Specify whether the current port is used for access or not. If
set to Enable, any call made to the card in this port will be redirected to the
phone number on any other idle port which is not set as a main access. The
any other idle port may be either on the same GoIP Gateway or on another
GoIP Gateway which keeps reporting its port status to a Notification Server.
 Check Balance: Specify whether need to check card balance.
 Card Number: Specify the card number.
 Balance: Specify the balance of the card.
 SMS Forward To: Specify a receiver to which the SMS, which is sent to the
card on this port, will be forwarded. The country code must be prefixed, for
example, 86 35 2345678, while the string 86 stands for the country code of
China and 35 2345678 is the China Mainland mobile phone number.
 SMS Center: Specify the code of SMS Center.
The screenshot below shows the operation mode to set GoIP port notification
feature.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn
Fields are specified as following:
 Enable or Not: Specify whether enable status notification or not.
 Server IP: Specify the IP of server to which the notification is sent to.
 Server Port: Specify the port of server to which the notification is sent to.
 Expiration Period: Specify the expiration period to send status notification
message.
4.4.2 IMEI Settings
The screenshot below shows the operation mode to set IMEI for each card
inserted in GoIP Gateway port.
Fields are specified as following:
 Port No: The GoIP Gateway mobile port. Each port contains one or more
card slots. Port No starts from to 8.
 IMEI A: Specify the IMEI for card A of the port.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 2
 IMEI B: Specify the IMEI for card B of the port.
 IMEI C: Specify the IMEI for card C of the port.
 IMEI D: Specify the IMEI for card D of the port.
The specified IMEI, instead of the default IMEI of the card, will be used for the
corresponding card to communicate with mobile base.
The screenshot below shows the operation mode to set Dynamic IMEI for each
card of the designated port. A group of IMEIs which are increased by in
numeric sequence can be set for one or all card(s) on one or all GoIP Gateway
mobile port(s). If a card on a port is assigned with a group of IMEIs, it will
randomly use any of the IMEI in group to communicate with mobile base.
Add New
Click button Add New to expand the data input area to add new data. Fields are
specified as following:
 Data status: Mark the status of current data record. Option values are
Add/Edit. Value Add means the data is new while value Edit means the data
is old.
 Ports: Specify the port(s) on which the IMEI is added or modified. Option
value * means that the IMEI applies to all ports.
 Slots: Specify the card(s) on which the IMEI is added or modified. Option
value * means that the IMEI applies to all cards inserted in the selected ports
specified by Ports.
 IMEI Start: Specify an initial IMEI value for the IMEI group.
 IMEI Size: Specify the size of the IMEI group.
Click button Submit on the right to save the new data record.
Edit
All the records are displayed in list. Two operations are provided on the right of
each record. Click Edit to expand the current data record to Data Detail Area
which is above the Data List.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 3
Click button Submit on the right to save the old data record.
Delete
Click Delete on the right of each record to delete the current record. A message
box will be popped for delete confirmation.
4.4.3 SMS Operation
The screenshot below shows the operation mode to set SMS.
Fields are specified as following:
 Send to Server: Specify whether need to enable the functionality of sending
SMS to server.
 Server IP: Specify the IP of server to which the SMS is sent. If set to empty,
the SMS will be sent to SIP server.
 SMS Coding: Specify the SMS coding when SMS is sent to through SIP
protocol.
The screenshot below shows the operation mode to send SMS through the
GoIP Gateway.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 4
) Select a module. The module here means GoIP mobile port and the SMS is
sent out through the card which is in service on this port.
2) Input the receivers separated by semi-colon.
3) Input SMS content and click button Send to send out the SMS.
Field Received SMS is used to display the last response of the SMS sent out, if
the response is not empty.
Field Successful SMS Number records down the total number of SMS which is
successfully sent out. Field Failed SMS Number records down the total number
of SMS which is sent failed.
4.4.4 Loc /Switch Card
The screenshot below shows the operation mode to set globally for card lock
and switch.
Fields are specified as following:
 Smart Check: Specify whether enable the smart check for cards in card slot
or not. If set to Enabled, those card slots without card inserted will be
skipped when system is scanning for available cards.
 SMS Receiver for Warning: Specify the receiver mobile number to receive
the warning SMS for card lock or switch.
The screenshot below shows the operation mode to set conditions for locking
card and switching card.
Fields are specified as following:
 Enable or Not: Specify whether enable the periodic checking or not. If set to
Enable, system will check the card running time periodically. If the
continuous running time reaches or exceeds the specified Period value, this
card will be locked and the next card will come into service.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 5
 Warning SMS: Specify whether need to send warning SMS when the card is
locked.
 Period: Specify the period to check.
 Locking Duration: Specify how long the card will be locked.
The following is to set condition of accumulated call duration.
Fields are specified as following:
 Enable or Not: Specify whether enable this condition. If set to Enable, the
accumulated call duration will be used as a condition for system to check.
 Warning SMS: Specify whether need to send warning SMS when the card is
locked.
 Accumulated Duration: Specify the max running duration of the card. If the
accumulated running duration reaches or exceeds this value, the card will be
locked if this condition is enabled.
 Locking Duration: Specify how long the card will be locked.
The following is to set condition of accumulated bridges.
Fields are specified as following:
 Enable or Not: Specify whether enable this condition. If set to Enable, the
accumulated number of bridges will be used as a condition for system to
check.
 Warning SMS: Specify whether need to send warning SMS when the card is
locked.
 Accumulated Bridges: Specify the max number of bridges on this card. If the
accumulated number of bridges reaches or exceeds this value, this card will
be locked if this condition is enabled.
 Locking Duration: Specify how long the card will be locked.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 6
The following is to set condition of accumulated calls.
Fields are specified as following:
 Enable or Not: Specify whether enable this condition. If set to Enable, the
accumulated calls will be used as a condition for system to check.
 Warning SMS: Specify whether need to send warning SMS when the card is
locked.
 Accumulated Calls: Specify the max number of calls on this card. If the
accumulated number of calls reaches or exceeds this value, this card will be
locked if this condition is enabled.
 Locking Duration: Specify how long the card will be locked.
The following is to set condition of consecutive failed calls.
Fields are specified as following:
 Enable or Not: Specify whether enable this condition. If set to Enable, the
accumulated number of failed calls will be used as a condition for system to
check.
 Warning SMS: Specify whether need to send warning SMS when the card is
locked.
 Accumulated Failure: Specify the max number of consecutive failed calls on
this card. If the number of consecutive failed calls reaches or exceeds this
value, the card will be locked if this condition is enabled.
 Locking Duration: Specify how long the card will be locked.
The following is to set condition of consecutive short calls.

SinoV-X500 GOIP gateway User Manual
www.sinovoip.com.cn 7
Fields are specified as following:
 Enable or Not: Specify whether enable this condition. If set to Enable, the
accumulated short calls will be used as a condition for system to check.
 Warning SMS: Specify whether need to send warning SMS when the card is
locked.
 Accumulated Short Calls: Specify the max number of consecutive short calls
on this card. If the number of consecutive short calls reaches or exceeds this
value, the card will be locked if this condition is enabled.
 Short Call Duration: Specify the call duration to recognize a short call. Any
call whose duration is less than this value will be regarded as an short call.
 Locking Duration: Specify how long the card will be locked.
4.4.5 AT Command
The screenshot below shows the operation mode to send AT command to GoIP
Gateway.
The module here means the GoIP mobile port.
Button Restart is used to restart this module.
Button Stop is used to stop this module.
Button Start is used to start this module.
Button Call is used to dial out through the selected module manually.
For the USSD command, please refer to the local carrier standard.