Sintron VD-200M User manual

QUICK START GUIDE
VD200M

Overlook of Vehicle Docking
Lever
Hook
Key Lock
Comparment Door
To install optional
module.
Option 1: GP03
For more information,
please check spec
table on page5.
I/O Ports Area
Front side:
Back side:
1
Latch
Connection Indicator
Docking Connector
Alignment Post
VESA Mount Screw Holes x4
(100x100mm)
VESA Mount Screw Holes x4
(75x75mm)
Installing Vehicle Docking

I/O Ports Define:
VGA Out RJ45 RS232x2 Power Reserved Antenna Connector
Getting Start:
1. Flip levers upward on both sides
2. Align grooves on the bottom of tablet with docking alignment posts
and push downward
2
USB A Typex4
To be the GPS antenna
Connector when GP03 is
installed.
*Default is no function.
Alignment Posts
VD200M
*Defaultis no function.

4. Press down levers on both sides at the same time.
5. Check connection indicator to make sure tablet is in the right position.
3
3. Push tablet forwards and make sure tablet is well connected
and fixed with latches.

1. Connect power plug with DC-IN jack.
2. Connect the other side of ACC cord with car accumulator
Cigar Lighter Adapter DC-INJack
DC-IN Jack
4
1. Connect power plug with DC-IN jack.
2. Insert cigar lighter adapter into car lighter.
Connecting Power Cord With Cigar Lighter Plug
Connecting Power Cord With ACC Plug

5
Secure tablet with key lock
Spec
75mm x 75mm and 100mm x 100mm VESA mount supported
(* Mount is not included.)
9VDC to 32VDC
Cigar lighter plug and ACC plug power cords
1x single Color LED (Blue)
I/OInterface
Mounting
SystemScrewHoles
19V @ 1.57A Max., total output 30W
OutputPower
PowerCord
LED
Input Power
4xUSB 2.0 type A, 1xEthemet, 2x RS232, 1x VGA, 1x DC-IN
200.0 mm
229.5mm
247.8mm
97mm
GP03: Provide GPS signal to tablet.
Optional Module