Hyper HyperDrive Thunderbolt 3 User manual

HyperDrive®
Thunderbolt™3
Mobile Dock
Connect all your
USB-A devices
Data + Display + Charge
Your Laptop/iPad Pro 2021
Speaker +
Microphone
Gigabit Ethernet
USB-C Power In
DP
HDMI
USER GUIDE

Safety Instructions 1
Copyright 1
Trademarks 1
Regulatory Compliance 2
FCC Conditions 2
CE 2
WEEE Information 2
Introduction 3
Package Contents 3
System Requirements 4
Features 4
Product Overview 5
Connection 8
Audio Configuration 11
Specifications 12
Table of Contents

Before attempting to connect, operate or adjust this
product, please read and save the User’s Manual.
Do note, the style of the product shown in this User’s
Manual may be dierent from the actual unit due to
the production of various models.
Safety Instructions
Always read the safety instructions carefully:
• Keep this User’s Manual for future reference
• Keep this equipment away from humid locations
• If any of the following situations arise, please have
the product checked by a service technician:
– The product has been exposed to moisture.
– The product has been dropped and/or damaged.
– The product has an obvious sign of breakage.
– The product has not been working or you can’t
get it to work according to the User’s Manual.
Copyright
This document contains proprietary information
protected by copyright. All rights are reserved. No part
of this manual may be reproduced by any mechanical,
electronic or other means, in any form, without prior
written permission of the manufacturer.
Trademarks
All trademarks and registered trademarks are the
property of their respective owners or companies.
1

Regulatory Compliance
FCC Conditions
This equipment has been tested and found to comply
with Part 15 Class B of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not
cause harmful interference. (2) This device must accept
any interference received and include interference that
may cause undesired operation.
CE
This equipment is in compliance with the requirements of
the following regulations: EN 55032/EN 55024: CLASS B
WEEE Information
For EU (European Union) member users: According to
the WEEE (Waste electrical and electronic equipment)
Directive, do not dispose of this product as household
waste or commercial waste. Waste electrical and
electronic equipment should be appropriately collected
and recycled as required by practices established for
your country. For information on recycling of this product,
please contact your local authorities, your household
waste disposal service or the shop where you purchased
the product.
2

Introduction
The Thunderbolt™ 3 Mobile Dock is a DPD (Dual Powered
Device) designed for bus-powered or self-powered
dual-mode usage, and it supports one DP 1.4 and one
HDMI 2.0 output with HDR. With the Dock, you can
extend your computer to more USB peripherals, an
Ethernet network, or a speaker and microphone via the
Thunderbolt™ 3 USB-C interface. Do note, the USB-C plug
is reversible, so you can plug it in whichever way you
please. With the upstream charging function through
the USB-C interface, you can charge the host device at
up to 60W with USB-C PD. With the Thunderbolt™ ports,
the docking station enables you to enjoy blazing fast
data transmission between USB peripherals.
The Adopted Trademarks HDMI, HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing Administrator, Inc. in the United
States and other countries.
3
Package Contents
• Thunderbolt™ 3 Mobile Dock x 1
• User’s Manual

Features
• Upstream Port
– 1 x USB-C Thunderbolt™ 3
• Downstream Output
– 2 x USB-A 3.1 Gen 2*
– 1 x USB-C (PD power in only)
– 1 x RJ45 Gigabit Ethernet
– 1 x 3.5mm Audio Combo Jack
• Video Output
– 1 x DP1.4 (8K@30Hz)
– 1 x HDMI 2.0 (4K@60Hz)
• Upstream PD charging
Support 5 /9 /15 /20V, it will be reserved
15W for the Dock
– PD 45W with power adapter 60W
– PD 60W with power adapter 60W higher
4
System Requirements
• Windows® 10
• Mac OS® (macOS 10.15.3 above)
* When in self-powered mode, it supports USB 3.1 Gen 2 x 2.
When bus-powered, it supports USB 3.1 Gen 2 x 1 and USB 2.0 x 1.

Product Overview
Front
5
Item Description
1. DisplayPort 1.4 Connect to the DP monitor
2. HDMI 2.0 port Connect to the HDMI monitor
3. RJ45 port Connect to an Ethernet adapter
Connect all your
USB-A devices
Data + Display + Charge
Your Laptop/iPad Pro 2021
Speaker +
Microphone
Gigabit Ethernet
USB-C Power In
DP
HDMI
1 2 3

Right Side
6
Item Description
4. 3.5mm Audio Combo Jack Connect to Headset
5. USB-A 3.1 Gen 2 x 2* Connect to USB devices
* When in self-powered mode, it supports USB 3.1 Gen 2 x 2.
When bus-powered, it supports USB 3.1 Gen 2 x 1 and USB 2.0 x 1.
Connect all your
USB-A devices
Data + Display + Charge
Your Laptop/iPad Pro 2021
Speaker +
Microphone
Gigabit Ethernet
USB-C Power In
DP
HDMI
4 5

7
Item Description
6. USB-C PD
power in**
Connect to the USB-C
power adapter
Connect all your
USB-A devices
Data + Display + Charge
Your Laptop/iPad Pro 2021
Speaker +
Microphone
Gigabit Ethernet
USB-C Power In
DP
HDMI
6
** USB-C Power adapter should be 60W or higher.
Left Side

8
Connection
To connect the USB peripherals, Ethernet, speaker, and
microphone, follow the illustrations below:
Connect all your
USB-A devices
Data + Display + Charge
Your Laptop/iPad Pro 2021
Speaker +
Microphone
Gigabit Ethernet
USB-C Power In
DP
HDMI
NOTE: The following steps and screenshots
may vary slightly from each operating system

9
Windows®10
1. Select Always Connect to approve the device
you wish to connect, then click OK.
2. To make sure your device has been connected,
click on the bottom corner of your desktop and
open Thunderbolt™ Software.

10
3. Once that window is open, you’ll see the available
ports and if your device has been connected.

11
Audio Configuration
By default, when the docking station is connected to a
computer, the audio configuration may be changed to
USB (Multimedia) Audio Device automatically (this setting
depends on models). If it does not work, follow the steps
below to troubleshoot.
1. Head to your device’s Control Panel and then
select the Hardware & Sound icon.
2.Click Sound > Manage Audio Devices and then
select USB Audio Device.

Specifications
© 2023 Hyper Products Inc
All rights reserved.
USB-C Thunderbolt™ 3 x 1
DP1.4 connector x 1
HDMI 2.0 connector x 1
USB-C x 1 (Power in only)
USB-A 3.1 Gen 2 x 2*
RJ45 connector x 1
3.5mm Audio Combo Jack x 1
Single 8K@30Hz or Dual
4k@60Hz
10/100/1000 BASE-T
Bus-powered/Self-powered
60W
0~35 degree
-20~70 degree
CE, FCC, UKCA, RoHS
*When in self-powered mode, it can support USB 3.1 Gen 2 x 2.
*When bus-powered, it can support USB 3.1 Gen 2 x 1 and USB 2.0 x 1.
Upstream
Downstream
Resolution
Type
Power Mode
Max. PD Charging
Operation
Temperature
Storage
Temperature
User Interface
Video
Ethernet
Power
Working
Environment
Compliance
12/07/2023 21097Model: HDTB3TD