SINVERTEK CKK ELECTRONIC SPACE STATION 4 User manual

D E S I G N S E L E C T
CKK ELECTRONIC POWERED BY SINVERTEK ELECTRONIC CO., LTD.
www. ckkelectronic.com
- S PA C E S T A T I O N T T M -
# 4

TAMPO LED - This
LED indicates the
delay time
BLEND - This
knob controls
the mix ratio of
dry signal and
wet signal
FEEDBACK -
This knob adjusts
the number of
reflection
MONO OUTPUT -
Connecting this
jack to the input
of a guitar amp
Use this for mono
STEREO /THRU
OUTPUT-
Connecting this
jack to the input of
a guitar amp.
Use this for stereo.
Please see Function
card for THRU output
INPUT - This
jack accepts
the signal coming
from a guitar or
other musical
instrument.
CTRL INPUT -
This jack accepts
external control
switch. Please see
Function card for
more info.
POWER -
Only accepts the
connection of a
9V DC adaptor.
Center negative
polarity. NEVER
PLUG INTO VOL
HIGHER THAN 9V
DC
PEDAL FOOTSWITCH -
This switch turns the effect on / off.
Pressing and holding this switch, TAP TAMPO:
until the TAMPO LED flashes blue, then enter
Tap Tampo , using this switch to tap tampo,
and using DELAY/TAP DIV/MOD TYPE knob to
adjust TAP DIV. Pressing and holding this switch,
until the TAMPO LED flashes yellow, then exit
Tap Tampo.
- NO BATTERY OPTION - Please don’t remove the back plate
- W A R N I N G - - Please only use 9v DC adaptor. Center negative polarity
MOD - This switch controls modulation
rate. UP- SLOW / MID-OFF / DOWN-FAST
PEDAL LED -
This LED indicates
the pedal on / off
DELAY /TAP DIV/
MOD TYPE- This
knob adjusts the
delay time. If tap,
this knob controls
TAP DIV. please
see the Function
Card for MOD TYPE
REVERB - This
knob adjusts the
reverb

MODULATION TYPE SELECT- SPACE STATION PRO TTM Features 3
types of modulation. When the PEDAL SWITCH used as Bypass ( not Tap),
pressing and holding PEDAL SWITCH, then rotating DELAY/TAP DIV/MOD
TYPE knob, TAMPO LED flashes blue. Each time the TAMPO LED flashes,
the modulation type changes.
BYPASS TYPE SELECT- Pressing and holding the PEDAL SWITCH, then
plugging in the DC power plug, the PEDAL LED flashes, the Bypass type
switches between Buffer Bypass and Trail Bypass.
EXTERNAL CONTROL SWITCH FUNCTION SELECT - External control
switch can be used as Bypass or TAP TAMPO. Pressing and holding the
external control switch, then rotating the DELAY/TAP DIV/MOD TYPE
knob, until the TAMPO LED flashes blue, the external control switch
siwtches between Bypass and TAP TAMPO.
EXIT EXTERNAL TAP TAMPO - When the external control switch used
as TAP TAMPO, the DELAY/TAP DIV/MOD TYPE knob used as TAP DIV,
Pressing and holding the external control switch, until the TAMPO LED
flashes blue, then exit TAP TAMPO, and the DELAY/TAP DIV/MOD TYPE
knob used as DELAY.
STEREO OUTPUT AND THRU OUTPUT SWITCH - Pressing and holding
the external control switch, then plugging in the power plug, the
STEREO / THRU OUTPUT jack switches between stereo output and direct
( THRU) output.
- F U N C T I O N -