Sitecom WL-367 User manual

WL-358/359/363/367
Wireless ADSL2+ router
Annex-A (WL-358,WL-359,WL-363) & Annex-B (WL-367)
ser Manual
Version: 1.0

T ABLE OF C ONTENTS
1 KEY FEATURES .................................................................................................................... 4
2 PACKAGE CONTENTS ....................................................................................................... 5
3 PRODUCT LAYOUT............................................................................................................. 6
4 SYSTEM REQUIREMENTS............................................................................................... 8
5 MODEM/ROUTERPLACEMENT..................................................................................... 9
6 SETUP LAN, WAN ............................................................................................................... 9
7 PC NETWORK ADAPTER SETUP................................................................................ 10
BRINGING UP THE WL-35 /359/363/367...................................................... 13
9 INITIAL SETUP WL-35 /359/363/367 ............................................................. 13
10 CONFIGURATION WIZARD......................................................................................... 23
11 WIRELESS SETTINGS .................................................................................................... 25
12 FIREWALL SETTINGS .................................................................................................... 35
13 ADVANCED SETTINGS................................................................................................... 42
14 TOOLBOX SETTINGS ...................................................................................................... 54

Introduction
Congratulations on your purchase of the WL-358,359,363 or 367 Wireless
ADSL2+ Modem. The Modem is fully compliant with 802.11n. This modem is
also fully compliant with 802.11g & 802.11b. This modem provide the best
performance when used in combination with 802.11n client adapters.
The WL-358,359,363 or 367 is not only a Modem or Wireless Access Point,
but can also be used to connect wired-Ethernet devices.
For data protection and privacy, the modem can encode all wireless
transmissions with WEP, WPA, and WPA2 encryption. By default, the modem
is secured with a WPA2(AES) encryption key. (The WPA2-key is printed on the
label underneath the modem.)
With a built-in DHCP Server & powerful SPI firewall the modem protects your
computers against intruders and known Internet attacks, and also provides
safe VPN pass-through.

1Key Features
Features Advantages
IEEE 802.11b/g/n compliant Fully Interoperable with IEEE
02.11b / IEEE 02.11g / 02.11n
compliant devices
Four 10/100 Mbps Fast Ethernet
Port (Auto-Crossover)
To connect four wired PC's as well.
Firewall supports Virtual Server
Mapping, DMZ, IP Filter, ICMP
Blocking, SPI
Avoids the attacks of Hackers or
Viruses from Internet
Support 802.1x authenticator,
802.11i (WPA/WPA2, AES), VPN
pass-through
Provide mutual authentication
(Client and dynamic encryption keys
to enhance security
Integrated modem (Annex B) Fully compatible with the fastest
ADSL2+ connections up-to-date.

2Package Contents
Open the package carefully, and make sure that none of the items listed
below are missing. Do not discard the packing materials, in case of return;
the unit must be shipped back in its original package.
1. WL-358,359,363 or 367 modem/router
2. 220V ~ 240V Power Adapter
3. Quick Install Guide
4. CD ( ser’s Manual)
5. Warranty card
6. TP cable

3Product Layout
Port Description
ADSL Connect your telephone/ADSL cable this port
LAN Connect the cable from your PC or network device
to this ports.
Power
connector Connect your power adapter to this port.
Power button Turn the modem On or Off.
Power connector
LAN / computer connections
Modem connection
WPS/Reset butto
n
Power button

Back label
The back label describes the corresponding LED indications and port functionality.
LED Description
Power Lights up when powered ON. Blinks on
TEST/RESET
ADSL Lights up when an ADSL cable is
connected.
Internet Lights up when internet connection is P.
WLAN Lights up in Blue when WLAN is enabled.
Blinks on traffic
OPS Blinks when OPS mode is on
LAN1~4 When a LAN cable is connected the
corresponding light lights up.

4System Requirements
To begin using the WL-358/359/363/367, make sure you meet the
following as minimum requirements:
•PC/Notebook.
•1 Free Ethernet port.
•Wi-Fi card/ SB dongle (802.11 b/g/n) – optional.
•Annex B, ADSL internet connection.
•PC with a Web-Browser (Internet Explorer, Safari, Firefox,
Opera)
•Ethernet compatible CAT5 cables.

5MODEM/ROUTER Placement
You can place the modem on a desk or other flat surface, or you can
mount it on a wall. For optimal performance, place your Wireless
Broadband Modem/Router in the center of your office (or your home)
in a location that is away from any potential source of interference,
such as a metal wall or microwave oven. This location must be close to
a power connection and the ADSL/phone line should not be over 2
meters long.
6Setup LAN, WAN
Modem connection
LAN / computer connections

7PC Network Adapter setup
Windows XP
•Go to [Start Menu],  [Control panel],  [Network Connections].
•Right-mouse-click on the [Local Area Connection]) icon, and select
[properties]
•Select [Internet Protocol (TCP/IP)] =>Click [Properties].
•Select the [General] tab.
The Modem/Router supports DHCP. Please select both [Obtain an IP
a ress automatically] and [Obtain DNS server a ress automatically].

Windows Vista/Windows 7
•Go to [Start Menu],  [Control panel],  [View network status an
tasks], -> [Manage network connections].
•Right-mouse-click on the [Local Area Connection]) icon, and select
[properties]

•Select [Internet Protocol Version 4 (TCP/IPv4)], and Click [Properties].
•Open the [General] tab.
The Modem/Router supports DHCP. Please select both [Obtain an IP
a ress automatically] and [Obtain DNS server a ress automatically].

Bringing up the Modem/Router
Connect the supplied power-adapter to the power inlet port and connect it to
a wall outlet. Press the Power-Button to turn the modem on.
The WL-358/359/363 automatically enters the self-test phase. During self-test
phase, the Power LED will blink briefly, and then will be lit continuously to
indicate that this product is in normal operation.
9 Initial Setup Modem/Router
LOGIN procedure
1. OPEN your browser (e.g. Internet Explorer).
2. Type http://192.168.0.1 in address bar and press [Enter]

4. Type user name and password (default is admin/admin).
3. Click OK.
4. You will see the home page of the WL-358/359/363/367.
The System status section allows you to monitor the current status of your
router: the P time, hardware information, serial number as well as firmware
version information is displayed here.

LAN settings
The LAN tab gives you the opportunity to change the IP settings of the WL-
358/359/363/367.
Click <Apply> at the bottom of this screen to save any changes.
IP address 192.168.0.1. It is the router’s LAN IP address (Your LAN clients
default gateway IP address).
IP Subnet Mask 255.255.255.0 Specify a Subnet Mask for your LAN
segment.
DHCP Server Enabled by default. You can enable or disable the DHCP server.
When DHCP is disabled no ip-addresses are assigned to clients and you have
to use static ip-addresses. When DHCP server is enabled your computers will
be assigned an ip-address automatically until the lease time expires.
Lease Time Forever. In the Lease Time setting you can specify the time
period that the DHCP lends an IP address to your LAN clients. The DHCP will
change your LAN client’s IP address when this time threshold period is
reached.

IP Address Pool You can select a particular IP address range for your DHCP
server to issue IP addresses to your LAN Clients.
Note: default IP range 19 .168.0.100 

 19 .168.0.199. If you want
your PC(s) to have a static/fixed IP address, then you’ll have to
choose an IP address outside this IP address Pool
Domain Name You can specify a Domain Name for your LAN. Or just keep
the default (SitecomWLxxx).

Device Status
View the Broadband modem/router’s current configuration settings. Device
Status displays the configuration settings you’ve configured in the Wizard /
Basic Settings / Wireless Settings section.

Internet Status
This page displays whether the ADSL port is connected to an ADSL service
provider. It also displays the router’s WAN IP address, Subnet Mask, and ISP
Gateway as well as MAC address, the Primary DNS. Press Renew button to
renew your WAN IP address.

DHCP Client Status
DHCP This page shows all DHCP clients (LAN PCs) currently connected to your
network. The table shows the assigned IP address, MAC address and expiration
time for each DHCP leased client.
se the Refresh button to update the available information.

Modem/Router Log
View the operation log of the WL-35 /359/363/367. This page shows the
current system log of the Broadband modem/router. It displays any event
occurred after system start up. At the bottom of the page, the system log can be
saved <Save> to a local file for further processing or the system log can be
cleared <Clear> or it can be refreshed <Refresh> to get the most updated
information. When the system is powered down, the system log will disappear if
not saved to a local file.