SJC brands tasman eco Urban Noah User manual

RECYCLED
1
Urban collection
Save this instruction for furture reference.
Assembly of this furniture is best under taken by two people.
Packaging and instructions
printed on recycled materials
SJC Brands Pty Ltd abn. 58 106 988 578
4-6 Merryvale Rd, Minto, NSW 2566 p.o. box 5878 Minto,DC,NSW 2566
t. 02 9603 5000 f. 02 9603 7000
e. [email protected]
w.www.tasmaneco.com.au
Logan cot Elyse cot Noah cot
Logan toddler bed Elyse toddler bed Noah toddler bed
Noah / Elyse / Logan cot
Assembly instrucon

2
Elyse cot parts list
Logan cot parts list
Rail cover panel x 2
Left headboard ( top) Left headboard ( bottom ) Right headboard Side panel x 2
Rails x 2 Base slats x 2
RIght headboard Side panel x 2
Rail cover panel x 2 Rail x 2 Base slats x 2
Left headboard ( top ) Left headboard ( bottom )

3
Due to the heavy nature of the cot, it is recommended assembly is undertaken by two people.
Warning
Safety Consideration for your Child.
Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the cot are not compromised.
ENSURE THE COT IS NOT PLACED TOO CLOSE TO HEATERS, BLINDS, CURTAINS, WINDOWS OR POWER POINTS.
DO NOT HANG ANYTHING NEARBY WHERE THERE IS A POTENTIAL DANGER OF THE ITEM FALLING INTO THE COT.
KEEP ANY MEDICATION, STRING, ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM ANY POSITION
IN THE COT. It is advisable to keep all items out of your child’s cot to prevent su ocation or strangulation.
TO PREVENT FALLS, THE BASE OF THE COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE YOUR CHILD CAN SIT UP.
Recommended Mattress Size.
This cot has been manufactured for use with a mattress which measures 690 mm (wide) x 1300 mm (long) x 120 mm (maximum
thickness). The width and length are speci ed because it is IMPORTANT that the gaps between the mattress and the sides and
ends of the cot do not exceed 40 mm when the mattress is pushed to one side or end, and 20mm when the mattress is centred.
in the cot.This is to minimise the risk of a child’s limb becoming caught in the gap.The thickness of the mattress had been speci ed
to ensure that the depth of the cot is greater than 500mm with the mattress base in the lower psoition to minimise the risk of a child
climbing or falling out of the cot .
Safety Consideration for Cot.
Re-tighten all connector bolts (at least two months after assembling the cot), as some may loosen as the cot settles. Regulary
check all of the connecting bolts, making sure they are tight.
Regularly check cot for weakness in timber joints and timber panels. If any weaknesses are found, report immediately to
SJCBrands via: www.tasmaneco.com.au
Do not use cot if it has been damaged in any way and always use genuine Tasman Eco parts. Contact your nearest Tasman Eco
stockist or original place of purchase for spare parts
M6 x 15mm cap screw x 8
Noah cot parts list
Hardwares list
M6 x 35mm bolt x 24 Lunar washer x 8 M6 x 50mm bolt x 16 Allen key & Screw driver-
Le headboard ( top ) Le headboard ( boom ) Right headboard SIde panel x 2
Rail cover panel x 2 Rail x 2 Base slats x 2

4
M6 x 50mm bolts x 4
Lunar washer x 4
Lunar washer x 4
Step-2-
Step 1- Aach the rail cover panels to headboards secure with lunar washers and M6 x 50mm bolts.
Use lunar washers to connect rails to headboards when fixing M6 x 50mm bolts to headbaords,
fix M6 x 15mm cap screws to unused holes.
To prevent falls, the base of cot should be adjusted to the lower posion before your child
can sit up.
M6 x 50mm bolts x 4
M6 x 15mm Cap screw x 4

4
M6 x 35mm x24
Step 3- Connect the base slats to cot rails secure with M6 x 35mm bolts.
Step 4- Insert the le headboard ( top ) to le headboard ( boom ) ensure ghten.

5
Step 5-
M6 x 50mm bolt x 8
M6 x 15mm cap screw x 2
Connect the side panels to headboard secure with M6 x 50mm bolts and cap screws.
Step 6-
Allen key
Step 7-

6
Toddler bed assembly
Step 1- Connect the rail cover panels to right headboard & le headboard ( top ), secure with
lunar washers and M6 x 50mm bolts.
M6 x 50mm bolt x 4
Lunar washer x 4
Step 2- Use lunar washers to connect rails to headboards when fixing M6 x 50mm bolts
to headboard.
M6 x 50mm bolt x 4
Lunar washer x 4
Step 3- Connect the base slats to cot rails secure with M6 x 35mm bolts.
M6 x 35mm bolt x 24

7
Step 4- Fix M6 x 15mm cap screws to unused holes.
M6 x 15mm cap screw x 8
Step 5- Check all the bolts and screws are ght and do not over ghtem
Allen key
Step 6- Put on the recommended maress ( 1300mm x 690mm ), now toddler bed is
completed.

Urban collection Guarantee
SJC Brands Pty Ltd ABN. 58 106 988 578
4-6 Merryvale Rd , Minto , NSW 2566
PH: 02 9603 5000 FAX: [phone]
.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The guarantee described below is in addition to the guarantee provided by law.
2 YEAR MATERIALS AND WORKMANSHIP GUARANTEE
If within 2 years of the date of purchase of this product, there is found any defect in materials or workmanship of this product, SJC
Brands Pty Ltd will replace the product free of charge, subject to the condition below:
The replacement product will be identical to the originally purchase product wherever possible, though in situations where the
identical model is discontinued or out of stock, then SJC Brands Pty Ltd will replace the product with a model that is functionally
equivalent
This Guarantee is made to the purchaser and/or original owner only. For purposes of this Guarantee, the original owner is
considered to be the person who first makes use of the product.
Note: In situations where a person purchases this product for the purpose of gifting to another, the recipient is considered to be the
original owner.
CONDITIONS:
The 2 Year Material and Workmanship Guarantee will be void and nullified in circumstances where:
1.The item is improperly assembled or adjusted and or not assembled strictly in accordance with the written instructions provided
by the seller in the box containing the item.
2.There is damage to the product and that damage is deemed by SJC Brands Pty Ltd to be caused by incorrect assembly, misuse
or by use or storage outside of the physical or environmental specifications of the product.
3.There are modifications to the product or to parts of the product that were not authorized in writing by SJC Brands Pty Ltd.
4.The item is transferred, gifted or disposed of by the original owner to another.
WARRANTY CLAIM PROCEDURE:
For warranty claims, please email us via our claims section on our website www.tasmaneco.com.au or visit the store where the
product was purchased.
The product must be returned to SJC Brands Pty Ltd or to the place of purchase with proof of purchase, including date and
purchase price.
w.www.tasmaneco.com.au
Email: customer.ser[email protected]