SKINERA IPL 100k User manual

IN4210P
IPL Permanent Hair Removal Device 100k
Invention Works B.V.
[e-mail]
www.skinera.eu
with Intense Pulsed Light
Technology
Instructions for useInstructions for use
Instructions d’utilisationInstructions d’utilisation
GebruiksinstructiesGebruiksinstructies
Instrucciones de usoInstrucciones de uso
Manuale operativoManuale operativo
BedienungsanleitungBedienungsanleitung
EN
IT
FR
NL
ES
DE
IT
Skinera JEWEL UM 2298A cover ED89-03.indd 1 1/10/2017 16:55:29

Energy
1-5
Energy
1-5
Energy
1-4
Energy
1-5
Energy
1-5
Energy
1-4
Energy
1-3
Energy
1-2
HAIR
SKIN
1 2 3 4 5
2
5
6
4
13
IPL Permanent Hair Removal Device 100k
Skinera JEWEL UM 2298A cover ED89-03.indd 2 1/10/2017 16:55:29

1
ENEN
Copyright 2017 © Home Skinovations Ltd.
All rights reserved.
Legal Notice
Home Skinovations Ltd. reserves the right to make changes to its
products or specications to improve performance, reliability, or
manufacturability. Information furnished by Home Skinovations Ltd
is believed to be accurate and reliable at the time of publication.
However, Home Skinovations Ltd assumes no responsibility for its
use. No license is granted by its implication or otherwise under any
patent or patent rights of Home Skinovations Ltd.
No part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose,
without the express written permission of Home Skinovations Ltd.
Data is subject to change without notication.
Home Skinovations Ltd has patents and pending patent applications,
trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. The furnishing of this document
does not give you any license to these patents, trademarks,
copyrights, or other intellectual property rights except as expressly
provided in any written agreement from Home Skinovations Ltd.
Specications are subject to change without notice.
Invention Works B.V., Donk 1B, 2991 LE Barendrecht,The Netherlands,
www.skinera.eu, [email protected].
Skinera JEWEL UM 2298A inside ED89-03.indd 1 1/9/2017 17:07:08

2
ENEN
Table of contents
1. Get to know your Skinera™ IPL 100k............................... 3
2. Safety with Skinera™ IPL device ...................................... 4
3. Contraindications & warnings ......................................... 4
4. Do not use your Skinera™ IPL device if:........................... 6
5. Consult your physician before use if you have:.............. 6
6. Safety tips.......................................................................... 7
7. Possible side eects.......................................................... 8
8. Long-term hair removal the Skinera™ way..................... 9
9. Get started....................................................................... 12
10. After treatment ............................................................... 14
11. Maintenance.................................................................... 15
12. Troubleshooting ............................................................. 15
13. Customer service............................................................. 16
14. Warranty.......................................................................... 16
15. Disposal ........................................................................... 19
16. Specications .................................................................. 19
17. Signs and symbols .......................................................... 20
Skinera JEWEL UM 2298A inside ED89-03.indd 2 1/9/2017 17:07:08

3
ENEN
1. Get to know your Skinera™ IPL 100k
Skinera™ IPL Permanent Hair Removal 100k is a light-based device for
permanent hair reduction designed for home use. It is a powerful electrical
device and should be used with special attention to safety. Be sure to read
all warnings, contraindications and safety precautions before use, and follow
them strictly. We recommend you re-familiarize yourself with the instructions
before each treatment.
1.1 Package contents
Your Skinera™ IPL device package includes:
yHair removal device
yUser manual
yAdapter
1.2 Device description
Refer to the diagram at the front of this manual to see the location of each
feature of your Skinera™ IPL device.
1. Adapter socket
2. Energy level indicator lights (1-5)
3. Control button
4. Ready light
5.Treatment surface
6. Skin colour sensor
1.3 Intended use
The Skinera™ IPL device is intended to remove unwanted hair and eect
long-term, or permanent hair reduction. Permanent hair reduction is dened
as a long-term stable reduction in the number of hairs regrowing after a
treatment regime. You may use Skinera™ IPL device to remove unwanted
body hair. Ideal body areas include the underarms, bikini line, arms, legs, face,
back, shoulders and chest.
Do not use this device for any purpose other than as described in this manual.
Skinera JEWEL UM 2298A inside ED89-03.indd 3 1/9/2017 17:07:08

4
ENEN
2. Safety with Skinera™ IPL device
With Skinera™ IPL safety comes rst
Intense Pulsed Light (IPL) technology in the Skinera™ IPL device provides safety
with lower energy levels. IPL achieves long-term hair removal results. The low
energy reduces the risk of harm or complications, and contributes to your
overall safety.
3. Contraindications & warnings
The Skinera™ IPL device is not designed for everyone.
Hair removal by lasers or intense pulsed light sources can
cause increased hair growth in some individuals. Based
upon currently available data, the highest risk groups for
this response are females of Mediterranean, Middle Eastern
and South Asian heritage when used on the face and neck.
For more information visit www.skinera.eu.
E
This device must not be used by the following people:
children, adults with limited physical, sensory or
psychological capacities, or those lacking experience or
knowledge in how to use the device. Children should
be supervised to ensure that they do not play with the
device.
K
Do not use energy levels 2-5 on tanned skin or after
recent sun exposure (including articial tanning
machines). Refer to section 6.1.
K
Do not expose treated areas to the sun.
E
Never use around or near the eyes. The device emits
infra-red (IR) light and may cause damage.
E
Do not use on areas with injected lls or toxins.
Skinera JEWEL UM 2298A inside ED89-03.indd 4 1/9/2017 17:07:08

5
ENEN
E
Do not treat on tattoos or permanent makeup, dark
brown or black spots (such as large freckles, moles, or
warts), nipples, genitals, or lips.
E
Do not treat on active eczema, psoriasis, lesions, open
wounds or infections (cold sores), abnormal skin
conditions caused by systemic or metabolic diseases
(diabetes for example).
E
Do not treat on an area that has a history of herpes
outbreaks.
E
Do not use if you are pregnant or nursing.
E
Do not treat on areas where you may want hair to
grow. The results are permanent.
E
Do not treat the same area of skin more than once per
hair removal session.
E
Stop use immediately if you see your skin is very red, or
if your skin blisters or burns.
E
Use a lower energy level if you experience any
discomfort.
E
Remove all jewellery before use.
E
Keep the AC/DC adapter accessible at all times so
it can be removed from the socket easily in case of
emergency.
A
Keep your device away from water! Do not use near
bathtubs, showers, basins or other vessels containing
water. Do not place or store the device where it can fall,
be pushed or placed anywhere near water. There is a
risk of electrocution. Unplug immediately.
Skinera JEWEL UM 2298A inside ED89-03.indd 5 1/9/2017 17:07:08

6
ENEN
E
Never leave the device unattended when plugged
into an outlet. Keep the AC/DC adapter accessible at
all times, so it can be removed from the socket easily in
case of emergency.
E
Do not attempt to open or repair your Skinera™ IPL
device. You may to dangerous electrical components
or pulsed light energy. You may cause serious harm to
yourself and you will void your warranty.
4. Do not use your Skinera™ IPL device if:
The plug, attachments or accessories are not recommended by
Invention Works B.V.
The device has a damaged cord or plug. Keep the power cord
away from heated surfaces.
You see or smell smoke when it is in use.
The device is not working properly, or it appears to be damaged.
The skin colour sensor is cracked or broken.
The device casing is cracked or coming apart.
In such cases, contact Skinera™ Customer Service.
5. Consult your physician before use if you have:
A history of kelodial scar formation.
Epilepsy.
A disease related to photosensitivity, such as porphyria,
polymorphic light eruption, solar urticaria, lupus, etc.
A history of skin cancer or areas of potential skin malignancies.
Skinera JEWEL UM 2298A inside ED89-03.indd 6 1/9/2017 17:07:08

7
ENEN
Received radiation therapy or chemotherapy treatments within
the past 3 months.
Used physician-prescribed drugs on your skin within the past 6
months.
Any other condition which, in your physician’s opinion, would
make it unsafe for you to be treated.
6. Safety tips
This section has information to help you use your device safely.
6.1 Exposure to the sun
The lowest energy level (1) is designed for safe use even after sun
exposure.
If you use energy levels 2-5, avoid further exposure to the sun
for 4 weeks before and 2 weeks after your treatment. This is
because higher quantities of melanin expose the skin to greater
risk when using any method of light-based hair removal. This
applies to all skin types, even those that don't seem to tan
quickly.
To protect recently treated skin when exposed to sunlight, be
sure to thoroughly apply sunscreen SPF 30 or higher, for 2
weeks after each hair removal session.
6.2 Exposure of pulse light to the eyes
Although you can use the device to treat facial hair take extra
care to avoid contact with the eyes.
ENever use around or near the eyes.The device emits infra-red (IR) light
and may cause damage.
6.3 Wounds or infections
Wait for the aected area to heal before further use.
Skinera JEWEL UM 2298A inside ED89-03.indd 7 1/9/2017 17:07:08

8
ENEN
7. Possible side eects
If you follow the instructions fully and pay attention to all warnings and
contraindications, complications and side eects are uncommon. However
every cosmetic procedure, including those designed for home use, involves
some degree of risk.Therefore, it is important that you understand and accept
the risks and complications that may occur with pulsed light hair removal
systems designed for home use.
Minor skin discomfort
IPL hair removal is generally well-tolerated. However, some users feel mild
discomfort during use. This is best described as a mild stinging sensation
on the treated skin areas. The stinging sensation may last during or after
treatment.
Anything beyond this minor discomfort is abnormal.This means that
either you should stop using the Skinera™ IPL device because you are
unable to tolerate the hair removal application, or that the energy
level setting is too high.
Skin redness
Your skin may become red immediately after using the device or within 24
hours. Redness generally clears up within 24 hours.
See your doctor if redness does not go away within 2 to 3 days.
Make sure you use the energy level that is comfortable for you and suitable
for your skin colour.
Increased sensitivity of the skin
The skin of the treated area is more sensitive so you may encounter dryness
or aking of the skin.
Skinera JEWEL UM 2298A inside ED89-03.indd 8 1/9/2017 17:07:08

9
ENEN
Pigment changes
The Skinera™ IPL device targets the hair shaft, in particular the pigmented
cells in the hair follicle and the hair follicle itself. Nevertheless there is a risk of
temporary hyperpigmentation (increased pigment or brown discolouration)
or hypo-pigmentation (whitening) to the surrounding skin. Risk of changes
in skin pigmentation is higher for people with darker skin tones or heavily
tanned skin. Usually discolouration or changes to skin pigment are
temporary, and permanent hyperpigmentation or hypo-pigmentation are
rare.
Excessive redness and swelling
In rare cases, treated skin may become very red and swollen. This is more
common in sensitive areas of the body. The redness and swelling should
subside within 2 to 7 days and should be treated with frequent applications
of ice. Gentle cleansing is OK, but avoid exposure to the sun.
Blisters or burns
Cool the aected area and apply anti-burn cream. Wait until the area has
healed completely before another treatment, and use a lower energy level.
If the skin does not return to normal within 3 days, consult your
physician.
8. Long-term hair removal the Skinera™ way
The eciency of hair removal varies from person to person according to body
area, hair colour, and how the Skinera™ IPL device is used. A typical full hair
growth cycle may take 18-24 months. During this time, multiple treatment
sessions are required to achieve permanent hair removal.
A typical Skinera™ IPL device hair removal plan during a full hair growth cycle
includes:
Treatments 1-4: Plan two weeks apart.
Treatments 5-7: Plan four weeks apart.
Treatments 8+: Treat as needed, until desired results are achieved.
Skinera JEWEL UM 2298A inside ED89-03.indd 9 1/9/2017 17:07:08

10
ENEN
8.1 Expected treatment outcomes
Individual response depends on hair type as well as biological factors that may
aect hair growth patterns. Some users may respond quicker or slower than
the average number of treatments.
Skin Type1Body Hair2
Light
Fluence
[J/cm2]
Part of the
Body
Average
Treatment
Time
Eectiveness
of Hair
Removal
1-5
Dark
blonde to
brown
2.5-4
Lower or upper
legs 60%
Arms Session 10-
12, approx.
4 weeks
apart
50%
Bikini line 60%
Underarms 55%
1-5 Brown to
black 2.5-4
Lower or upper
legs Sessions
8-10 approx.
4 weeks
apart
70%
Arms 60%
Bikini line 70%
Underarms 65%
1 Skin types are based on the Fitzpatrick scale of skin colours. Refer to the skin
colour chart at the front of this manual.
2 Not eective on white body hair.
8.2 Energy levels
The energy level determines the intensity of the light pulse delivered to your
skin. As the energy level increases, so do hair removal results, as well as the risk
of possible side eects and complications.
The device has 5 levels of energy from 1 (the lowest) to 5 (the highest),
represented by 5 energy level indicator lights (#2 in the diagram).
Skinera JEWEL UM 2298A inside ED89-03.indd 10 1/9/2017 17:07:08

11
ENEN
When the device is turned on, the energy level is set to level 1 automatically.
Only one energy level indicator light will be on.
To change the energy level, press the control button (#3 in the diagram)
repeatedly to increase the energy level from 1 to 5. Once at level 5, press the
control button again to reduce the energy level from 5 back to 1.
M
To determine the right energy level for your treatment area, refer
to section "9.1 Before your rst treatment".
8.3 Pulsing and gliding
Pulsing is the best technique for working at higher energy levels.
Work in rows (either across or down as shown in the image). Start at one end
of each row and progress to the other end. Press the treatment surface against
your skin. The treatment surface creates temporary pressure marks on the
treated area so you can see areas you have treated. After each pulse, move the
treatment surface to the next area. Keep doing this pulsing action for the area
you are treating. Avoid gaps or overlaps between areas.
EDo not treat the same area of skin more than once per hair removal
session.
Gliding is the best technique for working at lower energy levels.
Press the device rmly against your skin and slowly glide over your skin (either
across or down as shown in the image). Make sure that the skin is always
touching the device. At lower energy levels, the device takes only 1-1.5 seconds
to recharge between pulses. This generates a nonstop sequence of ashes.
Glide at a speed so that you avoid gaps or overlaps.
EStop use immediately if your skin blisters or burns.
Skinera JEWEL UM 2298A inside ED89-03.indd 11 1/9/2017 17:07:08

12
ENEN
8.4 The skin colour sensor
Light-based hair removal on darker skin tones may result in adverse eects
suchas burns,blisters,andskincolour changes(hyper-or hypo-pigmentation).
Your Skinera™ IPL device has a skin colour sensor that detects the colour of
your skin automatically (#6 in the diagram). If your skin tone is too dark for
safe use, the device will not operate.
8.5 What to expect when treating with Skinera™
For many people, using the Skinera™ IPL device may be their rst experience
witha light-based device.During a treatmentsession it isnormal toexperience
or feel:
Noise: The cooling fan makes noise similar to a hair dryer. This
is normal.
A popping sound: With each ash of IPL light.
A sensation of warmth and tingling: During each light pulse.
Some redness: It is not uncommon to see some very mild,
pink-like skin colouration during or just after a treatment. This is
usually most noticeable around the hairs themselves.
EStop use immediately if you see your skin is very red.
9. Get started
To use your Skinera™ IPL device, follow these steps:
1. Remove the device and other components from box.
2. Plug the adapter cord into the device socket (#1 in the diagram) and
plug the adapter into an electrical outlet. All energy level indicator
lights will turn on, and then go o.
Skinera JEWEL UM 2298A inside ED89-03.indd 12 1/9/2017 17:07:08

13
ENEN
9.1 Before your rst treatment
ERemove all jewellery before each treatment.
You must decide which energy level is right for your skin and the area you want
to treat.The device has 5 levels of energy from 1 (the lowest) to 5 (the highest).
To choose the right energy level, test each treatment area separately (refer to
the skin colour chart at the front of this manual).
1. Press the control button to turn on the device. The level 1 energy level
indicator light will go on.
2. Place the treatment surface (#5 in the diagram) on your skin to deliver
one pulse. If you do not experience abnormal discomfort press the
control button again. This will increase the energy level. Deliver one
pulse on a dierent spot at energy level 2.
3. Continue testing at increased energy levels. Use the energy levels
indicated on the skin colour chart. If you do not experience any adverse
eects within one hour, you can start your full treatment at that energy
level.
EUse a lower energy level if you experience any discomfort.
Repeat this test for each part of the body you wish to treat.
You are now ready to use your Skinera™ IPL device.
1. Before treating an area, the skin should be shaved, clean, dry and free
of any powders, antiperspirants or deodorants. Do not wax, pluck or
tweeze the hair out.
2. Press the control button. The device will turn on, the level 1 energy
indicator light will be on, and a fan sound will start.
3. Approximately 1 second after pressing the controlbutton, the readylight
will turn on (#4 in the diagram). The device is then ready to use at the
lowest energy level.
4. Set the energy level. Press the control button repeatedly to increase
the energy level until you have the level you want. The energy level
indicator lights indicate the energy level setting (refer to section "8.2
Energy levels").
Skinera JEWEL UM 2298A inside ED89-03.indd 13 1/9/2017 17:07:08

14
ENEN
5. Decide if you wish to treat the area by Gliding or Pulsing (refer to
section "8.3 Pulsing and gliding").
6. Apply the treatment surface to the skin (#5 in the diagram). Make sure
that the skin is spread evenly and smoothly. When the treatment
surface is in full contact with the skin, the ready light will start blinking
slowly.
7. The device will rst determine the colour of your skin automatically
and it will ash a pulse of light onto your skin. You will feel a mild
sensation of warmth and tingling, and you may hear a popping sound.
MThe device will not operate if your skin tone is too dark for safe
use.
MIf you are pulsing, remove the device from your skin. The
device will immediately recharge for the next pulse. After a few
seconds (depending on the energy level) the ready light will
turn on again, and will pulse when pressed against the skin.
8. If youare pulsing, repeat the process.If you are gliding,simply continue.
9. Continue to pulse or glide until you have treated the area fully.
EStop use immediately, if your skin blisters or burns.
10. After treatment
When you have nished your treatment session:
1. Turn the device o by giving the control button an extended press.
Remember the last energy level setting you used, because it will not
be restored when you turn the device on again.
2. Remove the adapter from the electrical outlet.
Skinera JEWEL UM 2298A inside ED89-03.indd 14 1/9/2017 17:07:08

15
ENEN
11. Maintenance
It is important to clean your Skinera™ IPL device after each treatment. To clean
the device:
LUnplug the device.
LTo clean the device including the treatment surface, wipe
with a clean, dry cloth. Use a cleaning uid with no more than
70% alcohol, or another non abrasive cleaning uid. Never use
acetone or other abrasive uids, because they will damage your
device.
LAfter cleaning, we recommend you store the device in its original
box.
ENever immerse your Skinera™ IPL device or any of its parts in water.
12. Troubleshooting
Do not attempt to open or repair your Skinera™ IPL device. You may expose
yourself to dangerous electrical components or pulsed light energy and cause
serious harm to yourself. It will also void the warranty.
Problem Checks
My Skinera™ IPL device
does not start.
Make sure the adapter is properly connected to the
device and that it is plugged into an electrical outlet
on the wall.
There is no light pulse
when the device
touches my skin.
Check that the device is connected and the ready
light is on. Make sure that the treatment surface is
evenly and rmly pressed to the skin.
It is also possible that your skin colour is too dark.
The skin colour sensor
light and the ready light
blink.
The skin colour is too dark.
One or more lights
blink. The device has malfunctioned.
Skinera JEWEL UM 2298A inside ED89-03.indd 15 1/9/2017 17:07:08

16
ENEN
For problems or queries, please contact Skinera™ Customer Service.
13. Customer service
See our website for more information: www.skinera.eu. This manual is also
available as a PDF download from the website. Contact Customer Service
to report unexpected operations or events, or any other problem with your
device. Our contact details are:
Country Service number Email
France 0800-941298 [email protected]
Germany 04473-3270450 [email protected]
Netherlands 0900-0400492 [email protected]
Spain 807001725 [email protected]
UK 0800-3586048 [email protected]
Italy [email protected]
14. Warranty
What Does This Warranty Cover? Invention Works B.V., its applicable
aliates (hereinafter: Invention Works B.V.) or the authorized dealer from whom
you purchased your Skinera™ product (hereinafter: the Device) shall repair or
replace the Device, if any material defects caused by Invention Works B.V. are
discovered in the Device during the warranty period, whether in the body of the
Device or its operation.
Who is entitled to warranty by virtue of this warranty certicate?
Only you, the original buyer of the Device who purchased the Device from
InventionWorks B.V. or its authorized dealers, are entitled to receive the warranty
specied in this warranty certicate. In order to be entitled to the warranty
service, you need to provide a proof that you are the original buyer of the Device
by presenting an original receipt for purchase of the Device. This warranty is not
an international warranty. The warranty will only be honoured in the country in
which the authorized dealer or the Invention Works B.V. entity from whom you
purchased the Device, are located.
Skinera JEWEL UM 2298A inside ED89-03.indd 16 1/9/2017 17:07:08

17
ENEN
What period does this warranty certicate cover? The warranty
covers repair requests received within one year (1) from the Device’s original
purchase date. Repair requests after one year (1) from the date of purchase are
not covered by this certicate of warranty. Repair requests regarding a Device
that was repaired or replaced must be submitted no later than: (a) one year (1)
from the original purchase date of the Device or (b) ninety (90) days from the
date that the repaired or replaced Device was returned to you, the later to occur.
If a sticker is attached to your Device stating a warranty period longer than that
indicated above, the warranty period mentioned on the sticker will apply, and
the Device will be repaired or replaced as part of the warranty until such period
expires.
If you purchased the Device in an EU country, you have an additional
year (according to the EU-Directive 1999/44) to claim for deciencies or
malfunctioning of your Device, which were present at the time of purchase,
but were not apparent then, as determined by Invention Works B.V. or the
authorized dealer. In order to make this extended warranty eective you must
contact the authorized dealer from whom you purchased the Device or the
local service center and notify them about the production fault immediately,
and no later than 60 days after detecting the fault.
How to get service for the warranty? For further instructions how to
obtain warranty service and for contact details of the service centres close to you,
visit www.skinera.eu, or email [email protected].
When asking for customer services you may be asked to ll in a form for returning
the product and you shall receive a reference number. In case of a defect that
is not covered by the warranty for whatever reason, Invention Works B.V. can
charge you for the shipping and repair costs if you agreed to repair the Device
at your expense.
What is not covered by this certicate of warranty? This warranty
does not cover any damage resulting from an accident, misuse (including using
the Device other than as described in the use instructions accompanying the
Device), defective use, lack of reasonable care, irregular and unreasonable use
including without limitation commercial or professional use, adding parts not
supplied together with the Device, losing parts, using unauthorized spare parts
or exposing the Device to any electrical current other than the indicated current.
Skinera JEWEL UM 2298A inside ED89-03.indd 17 1/9/2017 17:07:08

18
ENEN
Thewarranty will be cancelled iftheDevice wastreatedbyanyonenot authorized
by InventionWorks B.V. and InventionWorks B.V. will not be liable for any damage
resulting from repairs performed by anyone not authorized by Invention Works
B.V. The warranty does not include replacing used non-durable parts.
WARRANTY DISCLAIMER THE EXPRESS WARRANTY SET FORTH IN THIS
DOCUMENT IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTIBILITY, AND FITNESS FOR A PARTICULAR PURPOSE.
THIS WARRANTY IS THE SOLE AND EXCLUSIVE REMEDY FOR ANY DEFECT OF
THE DEVICE.
LIMITATIONS IN NO EVENT SHALL INVENTION WORKS B.V., ITS AFFILIATES
OR AUTHORIZED DEALERS, BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
EXEMPLARY, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF USE OR CHARGES FOR
SUBSTITUTE EQUIPMENT), REGARDLESS OF THE LEGAL THEORY ON WHICH
THE CLAIM IS BASED EVEN IF THEY HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. IN THE EVENT THAT THE REMEDIES SET FORTH IN THIS
WARRANTY ARE HELD TO FAIL OF THEIR ESSENTIAL PURPOSE OR IF INVENTION
WORKS B.V., ITS AFFILIATES OR AUTHORIZED DEALERS ARE HELD TO BE LIABLE
FOR DAMAGES ON THE BASIS OF ANY LEGAL THEORY, IN NO EVENT SHALL
INVENTIONWORKS B.V., ITS AFFILIATES OR AUTHORIZED DEALERS, LIABILITY FOR
DAMAGES EXCEED THE WHOLESALE PRICE OF A SINGLE UNIT OF THE DEVICE
AS OFTHE DATE THAT THE CAUSE OF ACTION ACCRUES.YOU ASSUME ALL RISK
AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY
AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE OR MISUSE
OF, OR INABILITYTO USE,THE DEVICE EXCEPTTOTHE EXTENT CAUSED DIRECTLY
BYTHE NEGLIGENCE OF INVENTION WORKS B.V.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS WHICH VARY FROM COUNTRY TO COUNTRY. SOME
COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES OR IMPLIED WARRANTIES, SO THE ABOVE
DISCLAIMERS AND LIMITATIONS MAY NOT APPLY TOYOU.
Skinera JEWEL UM 2298A inside ED89-03.indd 18 1/9/2017 17:07:09