SKLZ SOCCER TRAINER PRO User manual

V1
Thank you for choosing the SKLZ Soccer Trainer Pro. We are dedicated to providing you with the best tools and instruction possible to help you prepare for your sport.
If there is anything else we can do to help, don’t hesitate to send us an email at [email protected] or give us a call toll-free at 800-729-5954.
BEFORE YOU BEGIN:
• Read all instructions carefully before using. Failure to do so may result in injury or damage to the product.
• Always check for wear and tear before use. If any is found, do not use the product.
• If you are missing any Soccer Trainer Pro components, please contact Implus customer service toll-free at 800-729-5954.
• Adult assembly required.
• Soccer Trainer Pro is intended to be used on flat surfaces.
iWARNING:
PHYSICIANS WARNING: Not all exercise equipment and programs are suitable for everyone.
It is recommended that you consult your physician before using this equipment or beginning this or any other exercise program.
• Soccer Trainer Pro is under tension when assembled. Please take the utmost care when releasing the tension during disassembly. Failure to do so may result in injury.
• To avoid pinching, use caution when assembling the push-button tubing.
• Do not climb or hang on the Soccer Trainer Pro.
• Regularly check for wear and tear. Stop using Soccer Trainer Pro if any part of it breaks. Failure to do so could result in injury.
• When in use, make sure the Soccer Trainer Pro is set up in a clear area to avoid injury.
• When using the Soccer Trainer Pro, others should stay clear of the area to reduce the risk of injury.
• Any alteration of this product or its components will result in a disclaimer of liability.
iCAUTION:
• Keep away from fire and heat sources.
• Avoid storing the Soccer Trainer Pro in extremely hot or cold environments, as this could reduce the life span of the product.
• When done, disassemble Soccer Trainer Pro and store after use. Do not leave Soccer Trainer Pro outdoors.
• When in use, make sure the Soccer Trainer Pro is set up in a clear area to avoid damage to property.
1-YEAR LIMITED WARRANTY
This warranty does not cover damages resulting from accidents, misuse, abuse or lost merchandise and is valid only in the USA.
Need proof of purchase for warranty coverage. Questions? Email [email protected] or call toll-free 800-729-5954.
Made in China. ©2019 Implus Footcare, LLC. Manufactured and distributed by Implus Footcare, LLC: 2001 T.W. Alexander Drive, Box 13925, Durham, NC 27709-3925. SKLZ is a trademark or registered trademark of
Implus Footcare, LLC in the U.S. and/or other countries. Product features, appearance and specifications may be subject to change without notice. Unauthorized duplication is a violation of applicable local and international laws.
SOCCER TRAINER PRO
IN THE BOX
BASE BAR
LEFT LEG
RIGHT LEG
RIGHT/LEFT POST
WITH NET PRE-ATTACHED
A
CROSSBAR
B
C
E
D
GETTING STARTED
UPPER FRAME BASE FRAME

ASSEMBLY
ADJUSTING
PARTIAL DISASSEMBLY
FULL DISASSEMBLY
1. Place right and left posts with net pre-attached (A)
face down.
2. While holding push pins, insert right post into crossbar (B).
Crossbar logo must be facing down with the net hooks fac-
ing up for the Soccer Trainer Pro to function properly. Ensure
the logo is not upside down and the net hook openings are
facing the base of the frame as this will affect the attachment
of the bungees in step 4. Make sure to push crossbar all the
way into the push pin hole closest to the corner. This will
decrease the net tension when inserting left post.
3. While holding push pins, insert left post into crossbar until
locked into place at the push pin hole furthest from the
corner.
4. Fully extend upper frame by pulling right post to push pin
hole furthest from the corner.
VISIT SKLZ.COM TO LEARN MORE
1. While holding push pins, insert right leg into base bar (C)
(no hooks) until locked into place at the push pin hole
furthest from the leg. Repeat on the other side.
1. While holding push pins, insert right leg (D) into upper
frame until locked into place. Repeat on the other side
with the left leg (E).
1. To adjust return to driven, lofted or ground ball, loosen
one leg by turning twist handle counterclockwise to
release tension and move leg to desired position.
2. Tighten by turning twist handle clockwise into place
until secure.
1. Return legs to lofted position (flat to the ground).
2. To release net tension, turn the tension knob slightly clockwise (this will feel tight),
and then hold the net release lever down while still holding the tension knob. Once
the net release lever has been pushed let go of the tension knob and pull the cord
out to uncoil the net.
1. Return legs to lofted position (flat to the ground).
2. To release net tension, turn the tension knob slightly clockwise (this will feel tight),
and then hold the net release lever down while pulling the cord out to uncoil the net.
3. Release top and bottom push pins, and push frame in until frame locks into pin holes closest to corners. Repeat on other side.
Note: This may be easier with two people.
4. Release push pins on base frame to disconnect legs from upper frame. Repeat on other side.
5. Release push pins on upper frame, and collapse to push pin holes closest to the corners. Repeat on other side.
6. Release push pins on base frame, and collapse legs to push pin holes closest to the legs.
3. Once one leg is set, adjust opposite leg angle
to match.
Note: Both legs must touch the ground for
Soccer Trainer Pro to function properly.
Ground Ball:
Twist handles should be placed at
the back of the adjustment channel.
Driven Ball:
Twist handles should be placed
at the center of the adjustment
channel.
Lofted return:
Twist handles should be placed at
the front/closest to the net of the
adjustment channel.
(Legs should be flat on ground.)
SETTING BALL RETURN ANGLE:
Note: Ball return can be adjusted to any angle to customize training.
STEP 1: UPPER FRAME STEP 2: BASE FRAME STEP 3: ATTACHING BASE FRAME STEP 4: NET TENSION
1. Pull attached bungees over the top of the frame, and
secure on attached hooks. Repeat on the other side.
2. Once frame is assembled, rotate the tension knob on
the left side of the frame clockwise until the black part
of the net cord is partially visible. Do not overtighten.
Note: You may need to retighten the net after initial use.
Note: This may be easier with two people.
BASE FRAME
UPPER FRAME
A
B
D
C