SkyBound Mini Trampoline 36 inch Setup guide

ASSEMBLY AND INSTALLATION MANUAL
www.SkyBoundUSA.com
www.TrampolinePartsCenter.com
[email protected]
888-891-4689
Monday through Friday
8:00 am to 5:00 pm PST
or visit www.SkyBoundUSA.com
or www.TrampolinePartsCenter.com
-Kiki (Founder) & Team SkyBound
For customer service, please contact:
“Nurturing the inner-child in all of us by
uniting communities worldwide and
promoting an active lifestyle.”
When I shop, I am not just buying a product or
service. I purchase why that brand focuses on
what they do, what their corporate philosophy is,
the quality of their products, and whether or not
my personal core values align with that brand’s
vision. When I don’t feel great about a company’s
brand, products, or how I’m being treated as a
customer, then I know they are not delivering on
what matters most: exceeding the customer
expectation by delivering happiness with their
products, quality, and service.
This primary focus is what drives our culture at
Team Skybound. For supporting our vision, we
would like to personally thank you for trusting us
to deliver happiness to you and your family!
A PERSONAL MESSAGE FROM OUR FOUNDER
2022 BX International Inc – ALL RIGHTS RESERVED
Mini Trampoline 36 inch

WARNING
!
STEP 1
Install Foot (Part 13) to each leg of
trampoline. Secure top rail (Part 1 & 2)
using Parts 8, 9, 10. Tighten with Allen
Key (Part 12).
12
This object is subject to wear and tear. No warranties whether expressed or implied
are provided.
Injury will likely occur with the use of a trampoline or any associated product.
Use with supervision.Use at your own risk.
Only Use in a well-lit, well secured down area.
13
12
INSTALLATION STEPS OF TRAMPOLINE
TRAMPOLINE PARTS
NO.
1
2
3
4
5
6
8
7
9
10
11
12
13
1
1
1
1
1
28
Part Name
Top Rail With Leg
Top Rail With Leg
And Handrail Insert
Upward Handrail
Lower Handrail
Spring Pad Cover
Piece Pad
Spring
Spring Tool
Allen Key
Foot
Pictures Quantity
6
Screw (M6)
Washer (M6)
Spring Easher (M6)
11
11
11
1
1
7
1
2
10
9
8

Install Trampoline mat (Part 5) with
springs (Part 7) using Spring Tool (Part
11). As shown in the following Figures.
STEP 2
34
11
01
03
04
02
7
7
5

Install and secure Spring Pad
Cover (Part 6) as shown in
the following figures.
Tie the piece pad strap.
STEP 3
Mount 2-piece handle
(Part 3 & 4) to insert of
Part 2. Secure with Parts
8, 9, 10 as shown in the
figure below. Tighten
screw (Part 8) with Allen
Key (Part 12).
STEP 4
5 6
Installation
completion
drawing
SkyBound, a BX International Inc Company.
SkyBound is a registered trademark of BX International Inc.
in the U.S. and other countries. All logos, names,
characters, likenesses, images, slogans and
packaging appearance are the property of SkyBound.
01
02
6
3
4
10
9
PLEASE KEEP THIS MANUAL AS IT CONTAINS IMPORTANT INFORMATION
12
8