Skywalker SFTH400-A Quick guide

USER MANUAL
Skywalker Holdings LLC
P.O. Box 574, Brigham City, UT 84302
ASSEMBLY, MAINTENANCE, &
MODEL # SFTH400-A
WARNING
Read all precautions and instructions in
this manual before using this equipment.
Save this manual for future reference.
Maximum user weight 300 lbs.
DL/CR 2032 button cell
battery required (not included)

2
TABLE OF CONTENTS
WARNING
CHOKING HAZARD- Small
parts not for children
under 3 years.
WARNING
Adult assembly required.
STOP EVERYTHING YOU'RE DOING AND REGISTER YOUR PRODUCT
Find our warranty registration online by typing in: www.skywalkertrampolines.com/registration/
You'll need to have the following information handy:
• Name • Email address
• Address • Product model number
• Phone number • Product serial number
• Date of purchase • Retailer the product was purchased from
HEY WE'VE GOT SOMETHING REALLY IMPORTANT TO SAY
This product can be used with our app. Go to the app store and look for the Sky Fitness app to sync your trampoline
sensor.
Sky Fitness belongs to a family of brands focused on providing active products. Check us out online! We've got
assembly videos (for those of you who prefer movies over books), FAQs (so you know you're not the only one who
needs help) , additional products (including trampolines, sports and playground equipment), and most importantly,
find us on social media! Because we want to be your friend. We'd love to see how you are using our products!
Part List.....................................................................................................................................................................................3
Part Identification.........................................................................................................................................................4-6
Exploded Drawing..............................................................................................................................................................7
Assembly............................................................................................................................................................................8-14
Sensor Instruction............................................................................................................................................................15
Warning & Maintenance...............................................................................................................................................16
Limited Warranty..........................................................................................................................................................17-18
@skywalkertrampolines skywalkertrampolines @skywalker_trampolines
@swtrampolines @swtrampolines www.skywalkertrampolines.com

3
PART LIST
ORDERING REPLACEMENT PARTS
We get it, sometimes things happen, but the fun shouldn’t stop just because you need a new bolt or screw. To order
replacement parts, check out our website at: www.skywalkertrampolines.com or call our toll-free Customer Care
Hot-line at 1-866-603-Jump (5867), Monday - Thursday 8 a.m. to 5 p.m., Friday 8 a.m. to 3 p.m. (excluding holidays).
Our customer service team will ask you a few questions in order to get the replacement part sent out as soon as
possible. We’re not trying to complicate your life, we promise.
When calling, make sure to have the following information ready:
• The model # of the product (see the front cover of this manual)
• The key # and description of the part (see the part list above)
• The quantity of parts needed (only you know the answer to that one)
BEFORE YOU BEGIN
Thanks for choosing Sky Fitness! We’re just as excited as you are to help your family live an active (but most
importantly FUN) lifestyle. This model is one of our favorites, and we’re confident you’ll love it too. We want to make
things easier for you, so we have listed all the important information that you need to know. Make sure you brush
up on the warnings, instructions, assembly, maintenance, and use of your new product, because there will be a pop
quiz at the end (Okay, not REALLY, but if you’re still reading this, props to you! You’re awesome.).
Key No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Qty.
1
1
1
1
1
5
2
5
4
1
2
1
5
1
1
Description
Frame Assembly
Horizontal handle
Upper handle
Lower handle
Curl Knob
Knob
M8 x 35mm Carriage Bolt
Spring Washer
M8 Capnut
M8x30mm Bolt
M8x45mm Bolt
Mat (Pre-installed)
End Cap 1 (Pre-installed)
End Cap 2 (Pre-installed)
Adjustable Foot (Pre-installed)
Key No.
16
17
18
19
20
21
22
23
24
25
#
Qty.
1
5
5
5
25
1
1
1
1
3
1
Description
Frame (Pre-installed)
Leg (Pre-installed)
M6x65 Bolt (Pre-installed)
M6 Nut (Pre-installed)
Elastic with Ball (Pre-installed)
Sensor
Mobile Device Stand (assembly needed)
S5 Wrench
Wrench
M12 Washer
User’s Manual

4
Before you begin, take a look at the drawings below to make sure you have all the parts. The numbers in the squares
to the left (key numbers) will help you identify the parts during assembly.
PART IDENTIFICATION
1 2 3
456
78
Upper Handle (x1)
Curl Knob (x1)
M8 x 35mm Carriage
Bolt (x2) 9
10 11 12
Frame Assembly (x1) Horizontal Handle
(x1)
Lower Handle (x1)
Spring Washer (x5) M8 Capnut (x4)
Knob (x5)
M8x30mm Bolt (x1) M8x45mm Bolt
(x2)
Mat (x1)
Pre-installed

5
13 14 15
16
19
22
17
20
23
18
21
24
Leg (x5)
Pre-installed
M6x65 Bolt (x5)
Pre-installed
Sensor (x1)
Wrench (x1)
Adjustable Foot (x1)
Pre-installed
End Cap 2 (x1)
Pre-installed
Elastic with Ball (x25)
Pre-installed
Frame (x1)
Pre-installed
M6 Nut (x5)
Pre-installed
Mobile Device Stand
(x1) (assembly needed)
End Cap 1(x5)
Pre-installed
S5 Wrench (x1)

6
Before you begin, take a look at the drawings below to make sure you have all the parts. The numbers in the squares
to the left (key numbers) will help you identify the parts during assembly.
PART IDENTIFICATION
25 M12 Washer (x3)

7
EXPLODED DRAWING
(1)
(12)
(2)
(8)
(8)
(9)
(9)
(7)
(3)
(4) (16)
(5)
(22)
(21)
(6)
(19)
(6) (18)
(13)
(13)
(13)
(17)
(17)
(20) (20)
(20)
(20)
(20)
(20)
(20) (20)
(20)
(8) (8)
(8)(9)
(9)
(10)
(11)
(11)
(20)
(20)
(20)
(20) (20) (20) (20)
(20)
(20)
(20)
(20)
(20)
(20)
(20)
(20)
(20)
(17)
(13)
(13)
(15) (14)
(17)
(17)

8
READ THIS BEFORE YOU BEGIN
• You’ll probably need 1 adult and 20 minutes to assemble your trampoline (of course, that depends on what model
you have, and whether or not you’re secretly a superhero).
• We’ve provided a wrench to help with assembly, but you’re more than welcome to use your own tools.
• You can use gloves to protect your hands from pinch points during assembly.
• The assembly steps refer to parts by their descriptions and key numbers (see the part list on page 3).
• The assembly steps are written in a specific order, and if you don’t follow them exactly, you may end up having to
start all over again.
• Most importantly, YOU’VE GOT THIS. YOU’RE THE BEST TRAMPOLINE ASSEMBLER AROUND. This may not be the
easiest thing you’ve ever done, but it will be worth it. Trust us.
And if you’re a visual learner, check out our assembly videos!
ASSEMBLY
STEP 1
Register your Fitness Trampoline. For info on warranty registration, see page 2.
(2)
(7)
(8)
(8)
(9)
(9)
(7)
(3)
STEP 2
23
Attach the horizontal handle
(2) to the upper handle (3)
tighten with two M8X35mm
carriage bolts (7), two spring
washers (8) and two M8 cap-
nuts (9).
Upper Handle
(x1)
Horizontal
Handle (x1)
M8x35mm Ca-
rriage Bolt (x2)
Spring
Washer (x2)
M8 Cap-
nut (x2)
skywalkertrampolines
789

9
1
(4)
(4)
(5) (5)
(3)
(3)
Frame Assembly (x1)
(1)
Leg
Leg
Push Button
Curl Knob (x1)
Lower Handle
(x1)
STEP 3
45
STEP 4
Insert the upper handle (3) into the lower handle (4) and tighten
with the curl knob (6) as shown.
Note: The height of the handle can be adjusted with the three holes
on the upper handle.
Unfold the legs of the frame (1). As the legs unfold, the push buttons will pop
up to lock them into place.
Then turn the trampoline over and stand it on its legs.

10
Knob (x5)
M8x45mm
Bolt (x2)
ASSEMBLY
STEP 5
Insert a knob (6) into the hole on the top of each leg (17) and twist to tighten.
Note: Make sure the knobs are tight before each use of the trampoline.
6
(6)
(17)
STEP 6
Spring
Washer (x3)
M8 Capnut
(x2)
810
911
M8x30mm
Bolt (x1)
(11) (8)
(4)
(1)
(11)
(10)
(8) (9)
(9) (8)
(11) (8)
Connect the lower handle (4) to the
trampoline frame by sliding the open
tube of the handle onto the tube on the
underside of the frame (1) and placing
the main tube of the handle snugly
against the curved bracket on the frame.
Tighten together with two M8X45mm
bolts (11), two spring washers (8) and
one M8 capnut (9) at the front of the
lower handle and one M8X30mm bolt
(10), one spring washer and one capnut
underneath the frame as shown.

11
Pressed in
123
45
Press in
button
(14)
(15)
STEP 7
After the handle is installed, if its feet do not make contact with the ground, you
can adjust the height using the spare M12 washers (25) on the end cap 2 (14) and
by rotating the adjustable foot (15).
M12 Washer
(x3)
25
STEP 8
(6)
(6)
(6)
(17)
If you would like to fold the trampoline legs for storage, first loosen the knobs at each leg (6) (there is no need
to twist off completely.) Then, simply press in the push buttons and fold the legs (17) as shown.

12
ASSEMBLY
STEP 9
STEP 10
Now to assemble the mobile device stand, attach the two upright pole A’s and one upright pole B together with
two screw sleeves as shown. ( The screw sleeve may be pre-installed in the upright pole pieces.)
Upright pole A Upright pole A Screw sleeve Screw sleeve Upright pole B
Screw sleeveUpright pole A
Base
Connect the upright pole A side onto the screw sleeve on the base as shown.

13
ASSEMBLY
STEP 11
Slide the locking cap over the ball of the adjusting pole and temporarily rest it on the adjusting pole.
STEP 12
Screw the adjusting pole into the upright pole B with screw sleeve as shown.
Adjusting pole
Locking cap
Adjusting pole
Upright pole B
Locking cap

14
ASSEMBLY
STEP 13
Place the mobile bracket onto the ball of the adjusting pole. Now, bring down the locking cap you placed in
previous step and twist it to tighten the mobile bracket on as shown.
Note :The mobile bracket can be rotated to adjust the angle.
2
13
mobile bracket
Locking cap
Adjusting pole
STEP 14
Congratulations on completing your product! (See... we knew you could do it!) So here comes the real
question... are you satisfied with this completed product? If you are, go ahead and write a review on the
retailer’s site you bought it from. We’d really appreciate it... and if we could, we’d give you a gold star. Are you
completely frustrated and have some choice words for us? Contact us directly! We’re not trying to ruin your
life, we promise. And we’ll do everything we can to make it right again. See contact info on page 2-3.
2

15
SENSOR INSTRUCTION
Turn the sensor over and use a screwdriver to open the back
cover. Place a DL/CR 2032 button cell battery (not included ) into
the sensor making sure the positive side “+” is facing up. Then
replace the sensor cover.
ON: The sensor will turn on after feeling three steps/movements.
OFF: The sensor will automatically shut down after three minutes
of no movement.
The sensor has an indicator light, see the table to the right for
status indicator.
DOWNLOAD: Scan the QR code or go to your app store and
download the Sky Fitness app. Set up your profile.
CONNECTION: Make sure that the bluetooth of your mobile device
is on. Place the sensor close to your device and log in to the app.
Search for the device and select the connection.
SYNCHRONIZATION: Your exercise data will automatically upload
when the app is connected. After exercising, if the app isn't
already connected, open the app and connect your device to
upload your exercise data.
Buckle the sensor around your waist and adjust it to fit snugly.
ON OFF
(ios&Android)
(only for age 8+)
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5 Light Status
Steadily on
No light
Continuous flashing
Flicker (5 seconds apart)
Flicker (15 seconds apart)
Flash 3 times On, not connected
Waiting for connection
Connected
Uploading
Off
Malfunction
open
close
ios & Android

16
WARNING & MAINTENANCE
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordan-
ce with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
—Consult the dealer or an experienced radio/TV technician for help.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could
void the user’s authority to operate the device.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
STATEMENT
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
MAINTENANCE
1. After using for a period of time, please properly add lubricant to the rotating parts to keep them in the best
condition.
2. Long term use may cause loosening of screw parts. Please check and tighten them regularly to avoid damage to
accessories and personal injury.
Don't forget to check us out online. We'd love to hear from you!
@skywalkertrampolines skywalkertrampolines @skywalker_trampolines
@swtrampolines @swtrampolines www.skywalkertrampolines.com

17
Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal
use and service conditions. This product is warranted for three (3) years after the date of purchase. Warranty
coverage extends only to the original retail purchaser from the date of original purchase. This warranty is only valid
concerning products used for residential use. Products used for commercial use, such as gyms and studios, will not
be covered.
This warranty covers damage or failure that occurs during the course of NORMAL and INTENDED USE of the product.
WHAT IS NOT COVERED?
LIMITED WARRANTY
Loss or Damage: Loss or damage caused during shipping or caused by abuse, misuse, improper
or abnormal usage or unauthorized repair are not covered by this warranty and may also void the
warranty.
Incorrect Use: If the product is used incorrectly or if the product is used in a way that is out of the
scope of use by its design.
Improper Assembly: If the product is not assembled and/or not maintained according to the
instruction booklet. Aftermarket parts are installed or if the product is altered/modified from its original
design.
Weather Damage: Damage due to weather or Acts of God, improper storage, negligence, vandalism,
or any other activity that could be regarded as abusive.
This warranty is non-assignable and non-transferable.
INSPECTION AND REPLACEMENT PARTS:
1.
2.
3.
NOTE: All requested information must be provided in order to review your warranty claim.
To order replacement parts for your product please visit www.skywalkertrampolines.com
Skywalker Holdings, LLC, PO Box 574, Brigham City, UT 84302 USA.
Printed in China © 2020 Skywalker Holdings, LLC
Your product should be inspected upon unpacking and set up and thereafter on a regular basis. Worn, damaged,
or broken parts should be replaced immediately and before use.
Call the Skywalker Trampolines Customer Service Department at 1-866-603-5867 to file a warranty claim. Be
prepared to provide the following information: name, shipping address, a copy of your original sales receipt, a brief
description of the problem and cause, product model number and serial number. We may also ask for photos of
the damaged/defective parts.
After reviewing your information and examining your photos, Skywalker Trampolines will make the determination if
this part is covered by this warranty. If so, a replacement part will be sent to you.

18
NOTE: SKYWALKER HOLDINGS, LLC IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER
DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF
ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. ACCORDINGLY, THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.
THE WARRANTY EXTENDED HEREUNDER IS IN LIEU OF ALL OTHER WARRANTIES AND ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN ITS SCOPE AND DURATION TO THE TERMS
SET FORTH HEREIN. SOME STATES OR COUNTRIES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS. ACCORDINGLY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY STATE TO STATE OR COUNTRY TO COUNTRY.
THIS WARRANTY IS VALID ONLY IN THE COUNTRY THE PRODUCT WAS PURCHASED.