Sleep Connection W-308 Operator's manual

Infrared Intelligence
Anti-Snore Wristband
Infrared massage
Sleep Connection is a revolutionary device designed to reduce snoring
through a new nerve stimulation process. It features a specially designed
biosensor that detects snoring, a gentle, 4-second electrical pulse will be
sent automatically to stimulate nerves on the snorer's skin. Then the brain
senses this nerve stimulation and reminds or trains the snorer to change
the sleeping position, thereby reducing snoring.
• No side effects
• Smooth pulse without disturbing normal sleep
• Automatically detects snores
• Not affected if any buttons are pressed while sleeping
• Automatic power-off after 8 hours of activation
W-308
Infrared Intelligence
Anti-Snore Wristband

CATALOGUE PRODUCT INTRODUCTION
1. PRODUCT IN INTRODUCTION ---------------------------------------------------- 2
2. NAMES OF PARTS AND FUNCTIONS ------------------------------------------- 3
3. USAGE INSTRUCTIONS ------------------------------------------------------------- 4
4. WARNING -------------------------------------------------------------------------------- 5
5. TROUBLE SHOOTING --------------------------------------------------------------- 5
6. INCLUDED PACKAGE -------------------------------------------------------------- 5
6. THE PRODUCT SPECIFICATION -------------------------------------------------- 6
Thank you for your purchase. Before using this product,
please read the instructions carefully. This will give you a
better understanding of the product, and how to use it.
According to statistics, 60%-70% of adults snore while
sleeping. This can be annoying to your loved ones and also
have a negative impact on your body and health.

NAMES OF PARTS AND FUNCTIONS USAGE INSTRUCTIONS
Pulse Level Selector
Black conductive rubber
Battery Cover
Snore Detector
On/Off Switch
• Open conductive film packaging included in your Sleep
Connection box.
• Attach the film to the black conductive rubber pads on the
back of the Sleep Connection Anti-Snore Wristband.
• Put the wristband on.
• Test: Turn switch on and adjust to position to 1 wait until
the LED light turns green.
• Confirm the LED light is operating correctly and slowly
press the pressure test button three times. Approximately 5
seconds later you’ll feel a weak pulse.
• Ready for Usage: Pulse sensitivity differs from person to
person. Choose the intensity suitable for you.
(Note: Do not use this machine if indoor or background noise
is greater than 45dB. There is no pulse if the noise greater
than 45dB)
3 4

Sleep Connection is not suitable for people with a pacemaker
or another medical implant with electronic components.
If the status light is not bright or there is no response, please
check the following:
WARNING! THE PRODUCT SPECIFICATION
TROUBLESHOOTING
INCLUDED IN PACKAGE
A. Are the batteries installed correctly?
B. Do the batteries need to be replaced?
C. If A and B have been completed and you are still
having problems, please contact support@sleepconnec-
tionstore.com
1 x Sleep Connection Anti Snore device
1 x Wristband
1 x English Manual
1 x Tool
1 x Conductive Film
Specification
Output Intensity: 180uA
Main Output Form: 0.2 HZ fixed
The output waveform: fixed number of square wave output
Service Time: 8 hours(automatic off)
Power supply: 1.5 AAA batteries(Four section of battery)
Operation environment: 10 ºC ~ + 40 ºC 30~85%RH ºC
Preserve environment: -20 ºC ~+ 50 ºC 10~95%RH
Transmission environment: -10 ºC~+ 50ºC 30~85%RH
Note: You will be notified of product design orspecifications change.
Indoor background
noise
Short dialogue and other
noises above 65 d B
Short of Above
65 d B
Above 65 d B
(Within 50cm from TV) Stop output Stop output
Seldom output Output
Output
Output
Seldom output
Not output
60 d B
(With 1m from TV)
55 d B
(Within 1 m from
air-conditioner)
Below 50 d B
5 6