SleepPhones SIMPLE User manual

www.SleepPhones.com
1. TURNING ON YOUR SLEEPPHONES®SIMPLE MODULE
- Find the button on the SleepPhones®Simple module
located inside the headband.
- PRESS and HOLD the button for 3 seconds until you hear
“power on” through the speakers.
2. OPERATING INSTRUCTIONS
VOLUME: Click the button on the SleepPhones®Simple module
to change the volume. Each click will increase or decrease the
volume by 15%.
NEXT SONG: Double-click the button to skip to the next song.
TIMER: The default timer is 1 hour. To change the amount of
time a song plays, a long click followed by a short click will
advance the timer options. Each timer option will announce
on the speakers. For example, you will hear, “2 hours until
automatic power off.”
Timer options are:
30 minutes: will play your favorite track for 30 minutes
1 hour: will play your favorite track for 1 hour
2 hours: will play your favorite track for 2 hours
8.5 hours: double click to advance to the next track to nd
the best track that you prefer and you can listen to your
favorite for 8.5 hours
Play once then power off: will ow through all 17 tracks
which are 30 minutes each and power off when it reaches
the last track
Play until batteries are low: will also ow through all 17
tracks, but will keep playing until the battery dies
POWER OFF: The SleepPhones®Simple will turn off
automatically according to the timer option.
To turn off the module manually, PRESS and HOLD the button
for 3 seconds until you hear “power off.”
Once set, the system remembers your favorite volume, song and
timer option. It would be possible to use the SleepPhones®
Simple with a simple press of the button each night.
Quick Start Guide

www.SleepPhones.com
3. CHARGING INSTRUCTIONS
- Disconnect your speakers from the SleepPhones®Simple module.
- Plug in the micro-USB cable into the charging port of the
SleepPhones®Simple module.
- Plug the other end of the cable into a standard USB port
(such as a computer, TV, or wall USB charger).
While charging, there will be a pulsing red
light next to the raised button in the center
of the SleepPhones®Simple module.
When fully charged, it will change to a
solid red light. Reconnect the speakers
back into the SleepPhones®Simple
module via the micro-USB port.
Quick Start Guide
AS-SL-US-QUICK-01