SleuthGear All-in-one Zone Shield DVR User manual
16 1
Warranty Information
The manufacturer warrants their products to be free from defects in material or workmanship for a period
of one year from the date of the original purpose. The limited warranty stated above is subject to these
terms and conditions.
TERMS AND CONDITIONS
Limitation on Warranties: All merchandise carries a one (1) ear Manufacturer’s Limited Warranty
on parts and labor. SELLER MAKES NO WARRANT , EXPRESSED OR IMPLIED, INCLUDING AN
WARRANT OR FITNESS FOR AN PARTICULAR PURPOSE OR MERCHANTABILIT . No agent,
employee or representative of Seller’s are authorized to bind the Seller to any affirmation, repre-
sentation, or warranty, oral or written, unless by separate written instrument designed by Seller,
which by its terms state that it is included as part of this agreement.
Claims: Receipt of goods shall be deemed acceptance of the goods received. All claims for de-
fective goods or revocation of acceptances, for shortages, for delays, or failures in shipment or
delivery, or for any cause shall be deemed waived and released by the Buyer unless it is made in
writing within (7) days after receipt of goods. All claims must state specifically and in reasonable
detail the nature of all objections, and must be accompanied by delivery receipt or photocopy of
the sales order or packing slip. Any delivery not placed in dispute in a timely manner shall be
paid for by the Buyer and all uncontested amounts due shall be paid by the Buyer with terms
specified. As a condition to making a claim for missing or damaged goods sent, the Customer is
responsible for initiating and pursuing with the carrier.
Limitation on Seller’s Liability: Seller’s liability will be limited to replacement or repair of defective
goods upon receipt of goods in a timely manner per paragraph two herein. In no event will Seller
be liable for consequential or special damages or for transportation, installation, removal, adjust-
ment or other expenses or losses which may arise in connection with the use or installation of the
goods; late delivery, failure to deliver or from any other cause. Not withstanding the terms of this
Agreement, if there should arise any liability of Seller, such liability shall be limited to an amount
equal to one-half (1/2) the costs of the goods or $250.00, whichever is less.
Returned Material: In no case will the seller give a refund. Seller will accept most goods for ex-
change or credit, at the Seller’s discretion within 30 days of purchase date. In no case are goods
to be returned without first obtaining Seller’s permission. Only unused goods as currently manu-
factured, in original unopened packaging and which has been paid for by Buyer in accordance
with Seller’s payment terms will be considered for exchange or credit upon receipt of proof of
purchase. Special ordered items and obsolete items cannot be returned for credit. Material ac-
cepted for credit will be subject to a 15% restocking charge for service and handling. Seller will
not be obliged to replace any product that has been abused, improperly installed or otherwise
misused. Items must be returned in their original packaging, securely packed to reach the Seller
without damage.
Governing Law: This agreement shall be governed by the laws of the State of Tennessee.
IT IS THE USER’S RESPONSIBILITY TO ENSURE THAT THIS EQUIPMENT IS USED IN ACCORDANCE
WITH THE LAW(S) OF THE JURISDICTION IN WHICH THIS EQUIPMENT IS UTILIZED.
DO NOT ATTEMPT TO RETURN PRODUCT TO ORIGINAL MANUFACTURER, AS THIS PRODUCT HAS
BEEN MODIFIED AND IS NO LONGER SUBJECT TO ORIGINAL MANUFACTURER’S WARRANTY. IN
THE CASE OF A DEFECTIVE PRODUCT, CONTACT PLACE OF PURCHASE FOR RETURN PROCEDURE.
THIS EQUIPMENT HAS BEEN TESTED AND HAS BEEN FOUND TO BE IN COMPLIANCE WITH THE
LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 1 OF THE FCC RULES. THESE LIM-
ITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTIONS AGAINST HARMFUL INTERFERENCE
IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT USES, GENERATES AND CAN RADIATE RA-
DIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH INSTRUC-
TIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
Part 1 Low Power:
ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT WITHOUT THE EXPRESS AUTHORIZA-
TION OF THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIP-
MENT. (RULE 1 .21 OF THE FCC)
All-in-one Zone Shield DVR
hidden camera system
By SleuthGear™
Zone Shield DVR by SleuthGear™
1 2GB SD Card
1 USB Card Reader
1 Remote Control
1 Video Cable
Please check the package to be sure you
have received all of the parts
2 15
Congratulations and hank You
for purchasing the Zone Shield DVR by SleuthGear™
Zone Shield by SleuthGear™ system is an all-in-one DVR and hidden camera. All you
need to do is plug it in, set the time and date, insert an SD card and the system
will begin to record when it detects any motion.
he Zone Shield DVR by SleuthGear™ system has many advanced
features and functions but the best feature is already preset for your quick set up.
Quick Set up Guide
For your convenience the unit is set at the factory for setting most commonly used
making your set up fast and easy.
1. Take out the Zone Shield by SleuthGear™ and plug it in to any available 110V
wall outlet.
2. Facing the back of the unit locate the Video-Out Jack (See Diagram on page 8)
Using the included Video Cable plug cable into the Video-Out Jack. Connect the
other end of the Video Cable to a Television input.
3. Change the video input or auxiliary on your TV. The input select button is usually
located on the TV’s remote control or on the front panel of the TV itself, however,
some TV’s may require you to select the video input from the on-screen menu. There-
fore, consult the owner’s manual for the for specific instructions.
4. When you have a picture on your Television; using the included remote press the
Menu button to enter menu screen. (see diagram for remote functions on page 4)
. Set up Time and Date using the enclosed remote go to Main Menu> Date/Time
Setup see page 4, then return to the main menu.
6. Find the SD slot put in the SD card and your unit is ready to record video. (page 8)
7. Set unit in desired location for video surveillance and your finished.
Frequently asked Questions & rouble shooting
Q. When I change the time of a scheduled recording it does not change why?
A. Before you can change a recording time you must first reset it to “From 00:00 to
00:00” then you will be able to change it.
Q. What player software should I use to playback the recording files?
A. Please use only the software on the enclosed CD
No video? Have you inserted the micro SD card into the Large SD card adapter? Have you
tried another SD card? Is the lock on the SD card in the “lock” position? Did you put the
SD card in the unit before powering on your Sleuth Gear unit?
Did you know the unit is set to record motion as one of its default settings?
Do you know how to access the video files on your SD card?
Did you know you can press the play button on the remote control to play the recorded
files back on your Television?
Do you have the proper input selected on your TV to display the Video from the HVR
system?
Having trouble with the unit? Have you tried restoring the unit to its factory default set-
tings? This can be done in the menu > System Setup> Factory Default.
Safety Precautions and Notes
Use only the included power supply to operate your
Zone Shield DVR by SleuthGear™ system
(AC: 120 Volt, 60 Hz ONLY, if outside the US and Canada
a special adaptor may be required).
To avoid electrical shock, do not attempt to open the unit. Opening the unit Voids the
warranty. To prevent fire or shock hazard, do not expose this product to rain or
moisture. Do not operate near bath tub, sink, or swimming pool.
Avoid operation in moist environments.
Do not overload electrical outlets or extension cords as this may result in fire
or electric shock, this unit works only on 120 Volt .
Power surges or over voltage (i.e. 220 Volt) will damage the unit
and void the warranty. A surge suppressor and or other
adaptors may be required and are the responsibility of the user.
Please refer to the enclosed instructions for basic functions of the unit if applicable.
314
Features and Functions of the Zone Shield by SleuthGear™
Frame Rate Settings for recording you may record 30, 1 & 8 FPS Quality is adjustable,
Super, Low, Standard & High.. Use this setting to gain more memory. See page 6 for
details
Motion Setting This allows three motion sensitivity settings, High, Medium and Low, see
page 6 for details
Continuous recording you may record continuously without using motion this function
would use more memory then the motion activation setting please refer to Capacity chart
on page 8.
Playback on your TV by using the RCA output or the player supplied on the enclosed CD,
see page 9 for details
File Search from unit push play back see quick search or list all to find files, see page 7 &
8 for details
Storage: the unit is set to default to overwrite video when card is full using the first in first
out rule: you may change the overwrite function by choosing Full Stop from the storage
menu. You may also delete all files from the delete all functions this action will reformate
your SD Card, see page for details
Password, you may set up a password for the unit, please write the number down in a safe
place, if the password is lost there is no way to recover it. So please choose this option
carefully. See page 7.
System Setting Menu
ime and Date Stamp you may display time and date to show on your video clip. It will
be embedded in the actual video by the default setting; you may also adjust date format,
the position of the stamp and the color of the stamp before you start your recording. This
feature may be turned off. See page 4 for details
Factory Default menu this setting list the factory default here you may reset at anytime
back to factory default. See page 7 for screen shot of default settings.
Specifications Zone Shield DVR by Sleuthgear
Operating
System
Non OS
Video input format
NTSC or PAL (Auto detect)
Video Compression
H.264
MENU OSD
English
Record Resolution
720x240 (NTSC) / 720x288 (PAL)
Recording Frame Rate
6/8, 13/15, 25/30 fps
Video Recording Mode
Schedule continuous, Schedule motion
Pre recording
Supported
Post recording
Yes, 10~60 sec
Playback mode
Via device itself or included bundled software for PC
Playback
Fast Forward, Backward: x2/ x4/ x8, Frame by Frame
Playback Search
By Time, By Event
Recording Quality
4 Levels adjustable (Super, High, Normal, Standard)
Time/Date Stamp
Yes
Time Date Stamp For
mat
(1) yy mm dd, (2) dd mm yy, (3) mm dd yy, 3 formats
selectable by OSD
Daylight Saving Time
Yes
Recording Storage
Micro SD card (support SDHC) up to 32GB
Control
IR remote control
Power Supply
12VDC
Power Failure
Auto Recovery
LED
Power (Red)/Recording (Green & Yellow)
Firmware Upgrade
Yes, through Micro SD card
Operation temperature
0~+50
Dimensions
54x54 (mm)
13
Remote Control Functions
Diagram 2
4
Notes
Password__________________
What's in the box?
Zone Shield By SleuthGear™ Unit
1 2GB SD Card
1 USB Card Reader
1 Remote Control
1 Video Cable
Please check the package to be sure you
have received all of the parts
512
6 11
10 7
8 9
SD card times are approximate
Insert SD Card
printed side up
8 9
SD card times are approximate
Insert SD Card
printed side up
10 7
6 11
512
13
Remote Control Functions
Diagram 2
4
Notes
Password__________________
What's in the box?
Zone Shield By SleuthGear™ Unit
1 2GB SD Card
1 USB Card Reader
1 Remote Control
1 Video Cable
Please check the package to be sure you
have received all of the parts
314
Features and Functions of the Zone Shield by SleuthGear™
Frame Rate Settings for recording you may record 30, 1 & 8 FPS Quality is adjustable,
Super, Low, Standard & High.. Use this setting to gain more memory. See page 6 for
details
Motion Setting This allows three motion sensitivity settings, High, Medium and Low, see
page 6 for details
Continuous recording you may record continuously without using motion this function
would use more memory then the motion activation setting please refer to Capacity chart
on page 8.
Playback on your TV by using the RCA output or the player supplied on the enclosed CD,
see page 9 for details
File Search from unit push play back see quick search or list all to find files, see page 7 &
8 for details
Storage: the unit is set to default to overwrite video when card is full using the first in first
out rule: you may change the overwrite function by choosing Full Stop from the storage
menu. You may also delete all files from the delete all functions this action will reformate
your SD Card, see page for details
Password, you may set up a password for the unit, please write the number down in a safe
place, if the password is lost there is no way to recover it. So please choose this option
carefully. See page 7.
System Setting Menu
ime and Date Stamp you may display time and date to show on your video clip. It will
be embedded in the actual video by the default setting; you may also adjust date format,
the position of the stamp and the color of the stamp before you start your recording. This
feature may be turned off. See page 4 for details
Factory Default menu this setting list the factory default here you may reset at anytime
back to factory default. See page 7 for screen shot of default settings.
Specifications Zone Shield DVR by Sleuthgear
Operating
System
Non OS
Video input format
NTSC or PAL (Auto detect)
Video Compression
H.264
MENU OSD
English
Record Resolution
720x240 (NTSC) / 720x288 (PAL)
Recording Frame Rate
6/8, 13/15, 25/30 fps
Video Recording Mode
Schedule continuous, Schedule motion
Pre recording
Supported
Post recording
Yes, 10~60 sec
Playback mode
Via device itself or included bundled software for PC
Playback
Fast Forward, Backward: x2/ x4/ x8, Frame by Frame
Playback Search
By Time, By Event
Recording Quality
4 Levels adjustable (Super, High, Normal, Standard)
Time/Date Stamp
Yes
Time Date Stamp For
mat
(1) yy mm dd, (2) dd mm yy, (3) mm dd yy, 3 formats
selectable by OSD
Daylight Saving Time
Yes
Recording Storage
Micro SD card (support SDHC) up to 32GB
Control
IR remote control
Power Supply
12VDC
Power Failure
Auto Recovery
LED
Power (Red)/Recording (Green & Yellow)
Firmware Upgrade
Yes, through Micro SD card
Operation temperature
0~+50
Dimensions
54x54 (mm)
2 15
Congratulations and hank You
for purchasing the Zone Shield DVR by SleuthGear™
Zone Shield by SleuthGear™ system is an all-in-one DVR and hidden camera. All you
need to do is plug it in, set the time and date, insert an SD card and the system
will begin to record when it detects any motion.
he Zone Shield DVR by SleuthGear™ system has many advanced
features and functions but the best feature is already preset for your quick set up.
Quick Set up Guide
For your convenience the unit is set at the factory for setting most commonly used
making your set up fast and easy.
1. Take out the Zone Shield by SleuthGear™ and plug it in to any available 110V
wall outlet.
2. Facing the back of the unit locate the Video-Out Jack (See Diagram on page 8)
Using the included Video Cable plug cable into the Video-Out Jack. Connect the
other end of the Video Cable to a Television input.
3. Change the video input or auxiliary on your TV. The input select button is usually
located on the TV’s remote control or on the front panel of the TV itself, however,
some TV’s may require you to select the video input from the on-screen menu. There-
fore, consult the owner’s manual for the for specific instructions.
4. When you have a picture on your Television; using the included remote press the
Menu button to enter menu screen. (see diagram for remote functions on page 4)
. Set up Time and Date using the enclosed remote go to Main Menu> Date/Time
Setup see page 4, then return to the main menu.
6. Find the SD slot put in the SD card and your unit is ready to record video. (page 8)
7. Set unit in desired location for video surveillance and your finished.
Frequently asked Questions & rouble shooting
Q. When I change the time of a scheduled recording it does not change why?
A. Before you can change a recording time you must first reset it to “From 00:00 to
00:00” then you will be able to change it.
Q. What player software should I use to playback the recording files?
A. Please use only the software on the enclosed CD
No video? Have you inserted the micro SD card into the Large SD card adapter? Have you
tried another SD card? Is the lock on the SD card in the “lock” position? Did you put the
SD card in the unit before powering on your Sleuth Gear unit?
Did you know the unit is set to record motion as one of its default settings?
Do you know how to access the video files on your SD card?
Did you know you can press the play button on the remote control to play the recorded
files back on your Television?
Do you have the proper input selected on your TV to display the Video from the HVR
system?
Having trouble with the unit? Have you tried restoring the unit to its factory default set-
tings? This can be done in the menu > System Setup> Factory Default.
Safety Precautions and Notes
Use only the included power supply to operate your
Zone Shield DVR by SleuthGear™ system
(AC: 120 Volt, 60 Hz ONLY, if outside the US and Canada
a special adaptor may be required).
To avoid electrical shock, do not attempt to open the unit. Opening the unit Voids the
warranty. To prevent fire or shock hazard, do not expose this product to rain or
moisture. Do not operate near bath tub, sink, or swimming pool.
Avoid operation in moist environments.
Do not overload electrical outlets or extension cords as this may result in fire
or electric shock, this unit works only on 120 Volt .
Power surges or over voltage (i.e. 220 Volt) will damage the unit
and void the warranty. A surge suppressor and or other
adaptors may be required and are the responsibility of the user.
Please refer to the enclosed instructions for basic functions of the unit if applicable.
16 1
Warranty Information
The manufacturer warrants their products to be free from defects in material or workmanship for a period
of one year from the date of the original purpose. The limited warranty stated above is subject to these
terms and conditions.
TERMS AND CONDITIONS
Limitation on Warranties: All merchandise carries a one (1) ear Manufacturer’s Limited Warranty
on parts and labor. SELLER MAKES NO WARRANT , EXPRESSED OR IMPLIED, INCLUDING AN
WARRANT OR FITNESS FOR AN PARTICULAR PURPOSE OR MERCHANTABILIT . No agent,
employee or representative of Seller’s are authorized to bind the Seller to any affirmation, repre-
sentation, or warranty, oral or written, unless by separate written instrument designed by Seller,
which by its terms state that it is included as part of this agreement.
Claims: Receipt of goods shall be deemed acceptance of the goods received. All claims for de-
fective goods or revocation of acceptances, for shortages, for delays, or failures in shipment or
delivery, or for any cause shall be deemed waived and released by the Buyer unless it is made in
writing within (7) days after receipt of goods. All claims must state specifically and in reasonable
detail the nature of all objections, and must be accompanied by delivery receipt or photocopy of
the sales order or packing slip. Any delivery not placed in dispute in a timely manner shall be
paid for by the Buyer and all uncontested amounts due shall be paid by the Buyer with terms
specified. As a condition to making a claim for missing or damaged goods sent, the Customer is
responsible for initiating and pursuing with the carrier.
Limitation on Seller’s Liability: Seller’s liability will be limited to replacement or repair of defective
goods upon receipt of goods in a timely manner per paragraph two herein. In no event will Seller
be liable for consequential or special damages or for transportation, installation, removal, adjust-
ment or other expenses or losses which may arise in connection with the use or installation of the
goods; late delivery, failure to deliver or from any other cause. Not withstanding the terms of this
Agreement, if there should arise any liability of Seller, such liability shall be limited to an amount
equal to one-half (1/2) the costs of the goods or $250.00, whichever is less.
Returned Material: In no case will the seller give a refund. Seller will accept most goods for ex-
change or credit, at the Seller’s discretion within 30 days of purchase date. In no case are goods
to be returned without first obtaining Seller’s permission. Only unused goods as currently manu-
factured, in original unopened packaging and which has been paid for by Buyer in accordance
with Seller’s payment terms will be considered for exchange or credit upon receipt of proof of
purchase. Special ordered items and obsolete items cannot be returned for credit. Material ac-
cepted for credit will be subject to a 15% restocking charge for service and handling. Seller will
not be obliged to replace any product that has been abused, improperly installed or otherwise
misused. Items must be returned in their original packaging, securely packed to reach the Seller
without damage.
Governing Law: This agreement shall be governed by the laws of the State of Tennessee.
IT IS THE USER’S RESPONSIBILITY TO ENSURE THAT THIS EQUIPMENT IS USED IN ACCORDANCE
WITH THE LAW(S) OF THE JURISDICTION IN WHICH THIS EQUIPMENT IS UTILIZED.
DO NOT ATTEMPT TO RETURN PRODUCT TO ORIGINAL MANUFACTURER, AS THIS PRODUCT HAS
BEEN MODIFIED AND IS NO LONGER SUBJECT TO ORIGINAL MANUFACTURER’S WARRANTY. IN
THE CASE OF A DEFECTIVE PRODUCT, CONTACT PLACE OF PURCHASE FOR RETURN PROCEDURE.
THIS EQUIPMENT HAS BEEN TESTED AND HAS BEEN FOUND TO BE IN COMPLIANCE WITH THE
LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 1 OF THE FCC RULES. THESE LIM-
ITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTIONS AGAINST HARMFUL INTERFERENCE
IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT USES, GENERATES AND CAN RADIATE RA-
DIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH INSTRUC-
TIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
Part 1 Low Power:
ANY CHANGES OR MODIFICATIONS TO THIS EQUIPMENT WITHOUT THE EXPRESS AUTHORIZA-
TION OF THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THIS EQUIP-
MENT. (RULE 1 .21 OF THE FCC)
All-in-one Zone Shield DVR
hidden camera system
By SleuthGear™
Zone Shield DVR by SleuthGear™
1 2GB SD Card
1 USB Card Reader
1 Remote Control
1 Video Cable
Please check the package to be sure you
have received all of the parts
Other manuals for All-in-one Zone Shield DVR
1
Table of contents
Other SleuthGear DVR manuals
