Samsung SHR-4080P User manual

Real Time DVR
SHR-4080P User’s Manual

SHR-4080P USER’S MANUAL
ii
Please be sure to keep the following in mind for the right use of the product to pre-
vent proprietary risk or damage.
■Do not use multiple plugs at once.
●This may cause abnormal heat generation or fire
■Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel
with water around you.
●This may cause fire.
■Do not bend the power cord forcibly nor put a heavy material on it.
●This may cause fire.
■Do not touch the power plug with wet hands.
●This may cause electric shock.
■Insert the power plug firmly enough not to shake.
●This imperfect connection may cause fire.
■Keep the product off humidity, dust, or soot.
●This may cause fire or electric shock.
■Do not put metals(coin, hair pin, metal piece, etc.) or inflammable
materials(match, paper, etc.) in the ventilation hole.
●This may cause fire.
■Keep the surrounding temperature between 0˚C to 40˚C and keep the
product off humidity.
●This may cause breakdown.
■Secure sufficient ventilation.
●This may cause abnormal operation due to high temperature.
■Keep the product off direct ray of light or heat from the heating
device
●This may cause fire.
■Do not disassemble, repair, or remodel the product.
●This may cause fire, electric shock, or injury due to abnormal operation.
■Do not pull out the power cord.
●This may destroy the power cord, eventually, cause fire or
electric shock.
■Plug out in the event of thunder or lightning.
●This may cause fire.
■Keep your children off the battery after you take it out of the product.
They tend to swallow it unconsciously.
●If your children swallow it, please see the doctor immediately.
■Install the product at a safe place or attach the product to the wall or
ceiling with a stand firmly enough not to fall to the ground.
●This may injure people.
Safety Regulations

iii
WARNING
[Battery]
As wrong exchange of the battery in SHR-4080P may cause explosion, you shall use
the certified battery for SHR-4080P.
The battery specification is as follows.
-Normal Voltage: 3V
-Normal Capacity: 220mAh
-Continuous Standard Load: 0.2mA
-Operating Temperature: -30 ~ +60˚C
[System Shutdown]
- Power-off without terminating the system in the System Shutdown menu may incur
improper motion like data loss and disk failure. Power-off shall be done in the
System Shutdown menu.
This User’s Manual describes the basic usage of SHR-4080P. This Manual contains
all the matters necessary for using SHR-4080P such as brief instruction, part name,
function, connecting other equipment, and menu setup of SHR-4080P.
- SEC retains the copyright on this User’s Manual.
- This User’s Manual cannot be copied without SEC’s prior written approval.
- We are not liable for any or all losses to the product incurred by your use of non-
standard product or violation of User’s Manual.
- If you want to open the system case to touch the inside, please consult with an
expert who works for the shop where you bought the product.
- You may download open source codes from the following website.
(See CCTV Part of http://www.samsung.com.)
Before we start
Code Certification

iv
Safety Regulations
Before we start
Code Certification
Chapter 1 Overview
1. Introduction
2. Features
3. Part Names and Functions
Chapter 2 Installation
1. Installation Environment Setup
2. Checking Product and Accessories
3. Additional HDD Installation
Chapter 3 Connecting with Other
Equipment
1. Connecting Video, Audio, & Monitor
2. Connecting SCSI Device
3. Connecting Network
4. Connecting IEEE1394 Device
5. Connecting Alarm Input/Output
6. Connecting RS-485 Device
Chapter 4 Live
1. System Motion
2. Live Screen Mode
3. Live Channel Selection and Audio On/Off
Setup
4. Freeze and Zoom
5. Event Monitoring
6. Spot-out Monitoring
Contents
1
iii
ii
1-1
1-2
1-3
2
2-1
2-2
2-3
3
3-1
3-2
3-3
3-4
3-6
3-8
4
4-1
4-2
4-5
4-6
4-7
4-8

v
Chapter 5 Menu Setup
Before Use
1. System
2. Camera
3. Monitoring
4. Record Mode
5. Event Record
6. Record Schedule
7. Backup
8. Network
Chapter 6 PTZ Device Control
1. PTZ Control MODE
2. Basic Operation of PAN, TILT, & ZOOM
3. PRESET Setup
4. CAMERA MENU Setup
5. PRESET VIEW
6. Other VIEWs
Chapter 7 Recording
1. PANIC (Emergency Recording)
2. REC (Normal Recording)
3. Timer Recording
4. Event Recording
Chapter 8 Search & Play
Before Use
1. Calendar Search
2. Event Search
3. Date/Time Search
4. Go to First Search
5. Go to Last Search
6. Backup Data Search
7. Play
5
6
7
8
5-1
5-2
5-12
5-16
5-18
5-19
5-24
5-26
5-27
6-1
6-3
6-4
6-6
6-7
6-8
7-1
7-2
7-3
7-4
8-1
8-2
8-3
8-4
8-5
8-6
8-7
8-8

vi
Chapter 9 Back up
1. Backup Start
2. Backup Stop
3. Backup Play
Chapter 10 PC Viewer
1. Introduction
2. Feature
3. Recommended PC Specification
4. Installation
5. Program Execution
6. Initial Screen
7. Monitoring Mode
8. Search Mode
9. Setup Mode
Appendix
1. Product Specification
2. HDD Specifications
3. Outline Drawing
4. Factory Default
5. SHR-4080P Smart Viewer Play Frame
Specification
6. Troubleshooting (FAQ)
9
10
11
9-1
9-2
9-3
10-1
10-2
10-3
10-4
10-11
10-12
10-13
10-25
10-32
11-1
11-4
11-5
11-6
11-8
11-9

Chapter 1 Overview
1

1
Introduction
1-1
The realTime Digital Video Recorder(DVR) compresses the camera input data from 8
channels into a MPEG4 video file and the voice input data into a G.726 audio file
respectively to record them in the Hard Disk or retrieve them from the Hard Disk
simultaneously.
In addition, it transmits the video or audio file out through a network on real time basis
so that you can monitor either file remotely by your PC.
SHR-4080P USER’S MANUAL

2
Features
1-2
■8 CH Composite Input Connectors
■PAL Video Source Compatible
■Able to record the normal sized (720 x 288) video image at the speed of
200IPS(image per second)
■8 CH Loop Through Video Connectors
■Hard Disk Overwrite Mode
■Large Quantity Hard Disk Backup by IEEE1394
■Able to record, play, and transmit both audio and video files to Windows Network
Viewer(Smart Viewer) simultaneously
■Recording and Play of Audio 8CH
■Variable Search Mode (Time/Date, Event, Camera)
■Variable Recording Mode (Time Lapse, Event, Schedule, Emergency)
■Extended Hard Disk Connection (SCSI, IEEE1394)
■Alarm Interface (Input:8, Output:4, Reset:1)
■Remote Monitoring by Windows Network Viewer(Smart Viewer)

SHR-4080P USER’S MANUAL
3
Part Names and Functions
1-3
No Name Function
Channel Button
Play Back
Channel Button
Power LED
Network LED
Back Up LED
HDD Access
LED
Split Screen
Selection
Button
Mode Selection
Button
REC Button
Display
Mode
Search
Audio Setup
Button
Displays power on/off condition.
Displays both network connection and data transmis-
sion conditions.
Displays Back Up Mode.
Indicates Normal Access to HDD.
Upon Access to HDD, LED repeats on and off.
Selects Single Channel in the Display Mode.
Used for Number Input Button in the Number Input Mode.
Recording starts as set in the Normal Record Mode
while LED is on.
5
1
2
3
4
...
1 8
9
0
MODE
6
7
MODE
REC
Displays the Play Back screen.
Sets up Audio On/Off.
9 Displays Split Screen.
8 Displays Split Screen.
4 Displays Split Screen.
6 Displays Split Screen.
7 Displays Split Screen.
Displays PIP(Picture In Picture)
Screen.
Auto Sequence Mode
Enters Single Channel Screen
by the time set in MENU.
4 Displays Split Screen.
Displays the selected channel
in Full Screen.
Displays both LIVE Channel and
Play Channel in PIP Screen
simultaneously.
9 Displays Split Screen.

1-4
PANIC Button
REC LOCK
Button
PANIC
REC LOCK KEY
No Name Function
ALARM(WIDE)
MENU(PRESET)
Button
ZOOM Button
PTZ Button
SEARCH
(
VIEW ) Button
FREEZE(TELE)
Button
Direction
Control Button
Search
Function Key
Video/Audio set in the system records signals real-
time. The recording resolution is Level 8 with a nor-
mal size.
Locks the REC key motion.
Sets up Digital Zoom(x2).
Performs the TELE, WIDE, PRESET, and VIEW func-
tion by pressing the PTZ button.
Performs the FREEZE function in the DISPLAY Mode.
Performs the TELE function by pressing the PTZ.
Cancels the presetALARM function to set up a newALARM
function
. Performs the WIDE function by pressing the PTZ
Indicates the Search method.
Performs the VIEW setup function by pressing the PTZ.
Displays the system setup menu or enters an upper menu.
Performs the PRESET setup function by pressing the PTZ.
Changes or edits the left setup value for the
detailed menu item setup.
Moves the cursor up in a menu or increases the
setup value for the detailed menu item setup.
Changes or edits the right setup value for the
detailed menu item setup.
Moves the cursor down in a menu or decreases
the setup value for the detailed menu item
setup.
Acts as the Enter key for the menu setup.
Views the fast rewinding search screen.
Stops file searching.
Toggles during playback to activate
PLAY/PAUSE or PLAY.
Views the fast forwarding search screen.
JOG : Used for the Forward/Reverse
Frame search.
Shuttle : Performs the Play/Reverse Play
/FF/REW function.
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PTZ
FREEZE
TELE
ALARM
WIDE
SEARCH
VIEW
MENU
PRESET
ZOOM
➛

❿
❷
➛
Fast
Reverse
STOP
PLAY/PAUSE
Fast
Forward
JOG/
SHUTTLE
JOG SHUTTLE

SHR-4080P USER’S MANUAL
1-5
13
1
2
3
5 6 7 8 9 10 11
4
12
Caution
Caution
Do not play DVR on the carpet or other soft material to prevent clogging of the air
ventilator.
To play DVR on the cabinet or rack, be sure to check the ventilation condition.
No Name Function
Composite Video Signal Input Port (BNC Style
Connector)
You may use THROUGH port to transmit a video
signal to the other video equipment.
Audio Signal Input Port (RCA Jack)
SPOT Out Output Port (BNC Style Connector)
Composite Video Signal Output Port (BNC Style
Connector)
Audio Signal Output Port (RCA Jack)
VGA Video Signal Output Port
S-VIDEO Video Signal Output Port
Network Connection Port
SCSI Type Device Connection Port
IEEE1394 Type Device Connection Port
- ALARM IN 1~8 : Alarm Input Port
- ALARM RESET IN : Alarm Reset Port
- ALARM OUT1~4 : Alarm Output Port
- TX+, TX-, RX+, RX- : RS-485 Communication
Port
AC 100~230V Power Socket Support
VIDEO IN
THROUGH
AUDIO IN
SPOT
VIDEO OUT
AUDIO OUT
VGA
S-VIDEO
NETWORK
SCSI
IEEE1394
ALARM
AC-IN
5
6
7
8
9
10
11
12
13
1
2
3
4

Chapter 2 Installation
2

1
Installation Environment Setup
2-1
Do not play DVR on the carpet or other soft material to prevent clogging of the air
ventilator. To play DVR on the cabinet or rack, be sure to check the ventilation condi-
tion.
You shall pay attention to the following before you use the product.
1. Do not use it outdoor.
2. Do not let water or liquid in the connection part or the product itself.
3. Do not impose excessive shock or force.
4. Do not pull out the power plug unreasonably.
5. Do not disassemble the product on your own.
6. Do not exceed the rated input or output range.
7. Use certified power cord only.
8. Match a product with an input ground with a power cord with a ground.
SHR-4080P USER’S MANUAL

2
Checking Product & Accessory
2-2
Upon delivery of a product, you shall unwrap the product and put it on the even floor
or where you want to use it. Then you shall check if the following items are in it.
■ Main Body
■ User’s Manual
■ One Power Cord
■ Two Brackets
- Brackets are used to attach the product to the rack.
■ Smart Viewer Software CD (Incl. PDF Manual)
■ 12 Screw Specials
- Please keep screw specials well to be used for HDD addition.
■ 2 EA of RS-485/Alarm Terminal Block

SHR-4080P USER’S MANUAL
3
HDD Addition
2-3
You may add up to 3 more HDDs to the product.
However, since the product contains has many parts which may incur electric shock,
accident, or product breakdown and improper installation or setup may disturb HDD
recognition or normal product operation, you shall consult with an expert of the
agency where you bought the product.
[Caution for HDD Addition]
■ Do not let the cable stuck improperly nor uncoated. (This may cause breakdown or fire.)
■ Be careful not to cut yourself by sharp edges of the product.
■ Be careful not to miss the disassembled screws or parts. Imperfect assembly due
to short of screws or parts may cause breakdown or malfunctioning.
[HDD Addition Procedure]
1.Loosen screws on both sides(5 points) and back(1 point) to detach the product cover.
DIGITAL VIDEORECODERSHR-4080

2-4
2.Detach the cover from the product. (Pull out the cover slightly and lift from the back
side to detach.)
3. A bracket is fixed to each side of HDD. Please loosen the screw of the bracket to
which you want to fix HDD.
BRACKET-HDD

SHR-4080P USER’S MANUAL
2-5
4.Pull BRACKET-HDD to the product center to detach the fixed part at the bottom to
detach BRACKET-HDD from the product.
5.Tighten 4 SCREW-SPECIALs(BWH,6-32UNC,L10.5), supplied as an accessory to
fix HDD to BRACKET-HDD. (Screw tighten force shall be strong enough to resist
vibration.)

2-6
6. Restore HDD installed BRACKET-HDD.
(Assembly shall be done in the reverse procedure of disassembly as follows. Align the 5 fix-
ing points at the bottom with the BRACKET-HDD fixing holes respectively and push BRACK-
ET-HDD out of the product to align the screw fixing holes. Then, tighten the screws firmly.)
7.Check if BRACKET-HDD has been fixed to the product and connect both the power
supply cable and the signal transmission cable (IDE CABLE) to the HDD.
Signal Transmission
Cable (IDE Cable) Power Supply Cable

SHR-4080P USER’S MANUAL
2-7
8.Check the connector, wiring, and cable fixing condition inside the product and close
the cover.
9.Tighten cover-fixing screws. (5 points on both sides and 1 point in the back side)
✻ You can apply 2 HDDs to each BRACKET-HDD as shown in the figure.
Attention
Attention
For HDD addition, please select the same HDD with the existing HDD fixed to the
product as far as possible. This product can accept 4 more HDDs, 2 at Primary Slot
and 2 at Secondary Slot respectively. Both HDDs attached to Primary Slot and
Secondary Slot shall be set to Master and Slave respectively. Refer to User’s Manual
for Master or Slave Jumper Setting.
In the event of only one HDD installation, it shall be inserted into the Primary slot.
Note
Note
Refer to Appendix 2 to see which HDD specifications are supplied.