INSTRUCTIONS
OCTOPUS INTERACTIVE TOY
COMPONENTS
•Octopus toy
•2 polystyrene balls
TECHNICAL SPECIFICATIONS
•Size: 18 × 18 × 16 cm
•Material: ABS, EPS
•Powered by 3 1.5 V AA batteries (not
included)
INSTALLATION
•Turn the toy upside down and ensure the
power switch is set to “OFF”.
•Loosen the safety screw on the battery
compartment to open the cover.
•Insert 3 AA batteries (not included). Mind
the polarity.
•Close the compartment and tighten the
safety screw.
OPERATION
•Place the toy on a flat surface.
•When the wheels protection on the bottom
is used, the toy stands still and can be used
on a table or other small area.
•When the wheels protection on the bottom
is removed, the toy should be placed on a
flat surface with enough space to move
around.
•Turn ON the octopus by flipping the
ON/OFF switch to the “ON”position.
•The octopus starts moving around the room
with flashing lights, playing a cheerful tune.
•When the octopus encounters an obstacle,
it turns around and moves in another
direction.
•Place the polystyrene ball on the hat of the
octopus. The toy generates a strong air flow
that lifts the ball up and suspends it in mid-
air.
•To turn off the toy, flip the power switch to
the “OFF” position.
WARNINGS
•Turn OFF the product and remove batteries
when not in use.
•Batteries should be inserted with the
correct polarity to prevent a short circuit.
•Do not mix old and new batteries.
•Only use batteries of the same or
equivalent type as recommended.
•Do not expose batteries to high
temperatures or direct sunlight.
•The product contains small parts.
Suffocation hazard!
•Not suitable for children under 3 years.
•Keep away from water and fire.
•Clean the product with a damp cloth.