
Thank you for purchasing SmartDevices U7lU7H lablet.
U7IU7H is a sophisticated electronic product and you are
requested to read and understand this manual €refully.
This quick start guide will enable you to easily familiarize
with basic functionalities of U7lU7H product.
Battery Cha.ging DiagEm
Please make sure that the battery is fully charged before your first use. To
charge battery, please connect the matching charger to mains power outlet,
and insert the DC jack end into the charge interface of U7IU7H- Switch ON
the AC mains. After a few seconds, the charging instructions will appear on
the screen. During battery charging, you can view the charging progress by
pressing the power button. Once the charging is completed, please unplug
the charger from U7lU7H and the power supply connection.
Power on
Hold down the power button until the SmarlDevices Logo appears on the
screen. Wait for a few seconds, after the system startup is compleled then
enter into the main interface.
Hibernate
Once booted up, a short press of power button will put the U7IU7H to
hibernate state. During hibernation, U7|U7H will turn off the screen and
enter into the standby condition, where it will consume very little power.
Another short press of power button will bring the U7lU7H out of hibernation
and you can continue with your operation.
9Q =-
oo .:*"H".
j*