Smart view IC-712-I User manual

KVM
SWITCH
(IC-712-I)
(IC-714-I)
USER MANUAL V1.0
IC-712-I
IC-714-I
Package Contents –
§1 Smart View IC-712-I or IC-714-I KVM Switch
§1 User Manual
Please contact your vendor ifanything is missed.
Feat
ures
§Controls PCs with one PS/2 keyboard, PS/2 mouse and
monitor respectively
§Supports the standard PS/2 mouse, Microsoft IntelliMouse
(PS/2 compatible/Optical/Explorer 3.0), WheelMouse
Optical, Trackball (Optical 1.0/Explorer 1.0) & Logitech
TrackMan (Marble/Marble FX/ Marble+), Cordless
MouseMan (Wheel/Optical), Cordless TrackMan (FX/Live)
mouse, Cordless Optical TrackMan, MX300 Optical mouse
§Fully supports the Microsoft IntelliPoint 5.0 mouse driver &
Logitech Mouse Ware driver
§Supports the Windows95/98/98SE/Me/NT4.0/2000/XP,
DOS, Linux, Novell Netware, FreeBSD
§Superior video quality -Up to 1920 x 1440, DDC, DDC2,
DDC2B, DDC2AB, 200MHz
§Real mouse identification function
§2ways for PC selection -- Push-button switch or hot key
§Easy to install--No softwarerequired
§Hot Pluggable
§Integral keyboard and mouse emulation for PC booting
error free
§Auto scan function to monitor PCs
§Auto skips over the power-off PC
§Beep sound and multi selection ways on/off option for port
selection
Specifications
Function IC-712-IIC-714-I
PC Connectors 24
Port Selection Push-button Switch / Hot Key
On Line 2 4
LEDs Selected 2 4
Keyboard PS/2
Emulation
Mouse PS/2
Console Port 1x6 pin mini-DIN Female (PS/2)
Connector
-Keyboard
CPU Port
2x6 pin mini-DIN
Female (PS/2)
4x6 pin mini-DIN
Female (PS/2)
Console Port 1x6 pin mini-DIN Female (PS/2)
Connector
-Mouse CPU Port
2x6 pin mini-DIN
Female (PS/2)
4x6 pin mini-DIN
Female (PS/2)
Console Port 1x HD-15 Female (Std. VGA/SVGA)
Connector
-Monitor
CPU Port
2x HD-15 Male
(Std. VGA/SVGA)
4x HD-15 Male
(Std. VGA/SVGA)
VGA Resolution 1920x1440(Max.), DDC, DDC2,
DDC2B, DDC2AB, 200MHz
Power Adapter DC 9V 300mA (Min.) spare
Scan Interval 5 sec ~ 30 sec
Housing Metal
Weight 420 g 640 g
Dimensions (LxWxH) 128x75x45 mm 200x75x45 mm
Cable Requirement 3L-1618C (1.8m) / 3L-1630C (3m)
-1-
Hardware Requirements
Requiredspecifications
Console
One highest resolution VGA, SVGA or Multisync monitor
One PS/2 mouse
One PS/2 keyboard
PC One VGA, SVGA or Multisync card One 6-pin mini-DIN (PS/2) mouse port
One 6-pin mini-DIN (PS/2) keyboard port
Cable
Smart View custom cables (part # 3L-1618C or 3L-
1630C)
or equivalent
Appearance
Front View
1.Push-button Switches (Manual type)
2.Port LEDs
3.Console Keyboard and Mouse Ports
Rear View
1.Console Monitor Connector
2.CPU Port Connectors
-2-

I
nstallation
Before the installation, make sure the peripherals of all PCsare
grounded properly and turned off.
1.Connect the monitor, keyboard and mouse with the Console
Port Connectors.
2.Use the recommended extension cables to connect the
PCs with the CPU Ports of KVM Switch.
3.Turn on the PCs.
Operation
1.The function of LED display:
LED DISPLAY DESCRIPTION
Light off PC power off
Green light on PC power on and connected
Green light on & Red light
flashing PC power on, connected and selected
Note:It occursoccasionally that the green light of LED display is
on and the red light of LED display keeps flashing after
shutting down the PC because of the PC default.The
condition will not affect the regular operation of KVM
switch.
2.2waysfor PC selection–Push-button switch or hot key
2-1Push-buttonswitch (Manual Type)
Press the button on front panelto switch the CPU ports.
The red light of LED indicates which PC is selected.
2-2Hot Key option
Hot Key Navigation allows you to select PC fromthe
keyboard directly.
Options for Hot Key Navigation:
§Select PC by Hot Key
§Command mode
§Auto scanmode
§Beep sound on/off option: Press [Right Shift] key
twice to turn on or off the beep soundwhen needed.
§Select PC by Hot Key:
Press either left or right [Ctrl] key twice.
Item Hot Key Operation
Function
IC-712-I[L Ctrl] + [L Ctrl] or
[R Ctrl] + [R Ctrl] Access between two PCs.
IC-714-I[L Ctrl] + [L Ctrl] Switch to the previous PC.
IC-714-I[R Ctrl] + [R Ctrl] Switch to the next PC.
§Command Mode:
Press [Num Lock] key twice, and the 3 keys [Num
Lock], [Caps Lock] and [Scroll Lock] will flash to
access the Command Mode.
a). Directly press the function key [F1] ~ [F2] for IC-712-I or
[F1] ~ [F4] for IC-714-I to select PC.
b). Press [Left Ctrl] key to disable [Ctrl] and [Shift] hotkey
function. -3-
c). Press [Right Ctrl] key to enable [Ctrl] and [Shift] hotkey
function.
d). Press [Left Shift] key toturn off the beep sound.
e). Press [Right Shift] key toturn on the beep sound.
f). Press [Left Alt] key to disable Auto skip function.
g). Press [Right Alt] key to enable Auto skip function.
h). Press [Esc] or [Enter] key to quit the mode.
Note:[Ctrl] Hot Key function–Selecting PC ports.
[Shift] Hot Key function–Beep sound on/off.
§Auto Scan Mode:
Press [Scroll Lock] key twice to activate the Auto Scan Mode.
The time scale of Auto Scan ranges from 5 to 30 seconds,
and it can be recognized by the lights of the 3 keys[Num
Lock], [Caps Lock] and [Scroll Lock] as the timetable
below.
a). Press the right number key [+] to increase time scale.
b). Press the right number key [-] to decrease time scale.
c). Press [Esc] key to quit the mode.
Note:Light(s) corresponding timetable
Seconds Num Lock Caps Lock Scroll Lock
5 seconds Off Off On
10 seconds On Off Off
15 seconds On Off On
20 seconds Off On Off
25 seconds Off On On
30 seconds On On Off
3.The boot-up default of Smart View KVM Switch is
connected to your first activated PC.
4.When the PCis shut down under the function of “Auto
skips over the power-off PC”, it cannot be turned on again
by keyboard.
Troubleshooting
Makesure the cables are qualified and positioned.
Q1 : The keyboard does not respond accurately.
A1a:
Re-install the keyboard. Unplug the keyboard from the Console Port and plug it back again.
A1b:
Re-install the Smart View KVM Switch. Shut down the PCs, unplug the cables from the Smart ViewKVM
Switch andwaitfor five seconds. Then
plug the cables
back and activate the PCs.
A1c: When under Auto Scan Mode,please press [Esc] key
to escape.
A1d: PCs can’t supplythe power to Smart ViewKVM
Switch. Pleaseattach a power adapter of DC9V
300mAwith positivecentral polarity.
A1e: Try another keyboard.
Q2 : The mouse does not respond accurately.
-4-
A2a: Re-install the mouse. Unplug the mouse from the
Console Port and plug it back again.
A2b: Re-install the Smart View KVM Switch. Shut down
the PCs, unplug the cables from the Smart View
KVM Switch, and wait for five seconds.Thenplug
the cables back and activate the PCs.
A2c: Make sure the mouse is set on PS/2 mode.
A2d:
PCs can’t supply the power to Smart ViewKVM Switch. Pleaseattach a power adapter of DC9V
300mAwith positivecentral polarity.
A2e: Try another mouse.
Note: If you are using a particularmouse, wesuggest
installing the mouse driver from original manufacturer
to revealthe functionality of Smart View KVM Switch.
Q3: The mouse is out of control.
A3: The characteristic of the mouseis inefficient.Try
another superior mouse and plug it back again. Start
the operationafter hearing the beep sound.
Q4: There is the video problem.
A4a: The setting of resolution or bandwidth isover high.
Smart ViewKVM Switchsupports the VGA, SVGA,
Multisync and XGA (interlaced) with the resolution up
to 1920 x 1440 Hz. The maximum bandwidth is 200
MHz.
A4b: The cable is unqualified. Please use the superior
cables of Smart View cables series.
Q5:
A5:
Why the green light of LED display is on and red
light keeps flashing after shutting down the PC?
The condition is normal andcaused from the PC
default. The condition will not affect the regular
operation of Smart View KVM switch.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-5-