Smart Witness SV7QLCD-T User manual

support.smartwitness.com
SV7QLCD-T
Onscreen Menu Guide
Key Switch
Description
1 - Mode
Use on T4 (not used on “T”) model to change grid view and number of cameras
displayed on screen. This option works when more than one of the monitor’s video
inputs is used.
2 - Menu
Adjust Brightness, Contrast, Mirror Image (ON/OFF), Resolution mode (16:9 or 4:3),
Language, Back Delay (return to default screen 0 to 5 seconds after alarm triggered –
T4 model only), Guide Line (ON/OFF), Reset.
3- Left Arrow
Used to navigate through menu and adjust settings (brightness, contract, etc)
4 –Power Button
Turn monitor On and OFF.
5 –Right Arrow
Used to navigate through menu and adjust settings (brightness, contract, etc)
6 –Brightness
Choose from 5 pre-set screen brightness settings.
7 - Mirror
Flip screen image horizontally.

support.smartwitness.com
Menu Button Features:
1. Brightness setting
2. Contrast setting

support.smartwitness.com
3. Color Balance Setting
4. Aspect Ratio Setting

support.smartwitness.com
5. Language Setting
6. Mirror Setting (on/off)

support.smartwitness.com
7. Back Delay
Back Delay option is only applicable with SV7QLCD-T4 model since there are total of 4
input channels. If you have cameras directly connected to the LCD-T4 monitor and are
using the T4 triggers, then you may set a delay time of how long the camera channel
will stay active (i.e. how long the reverse camera will stay on the monitor after the car is
taken out of reverse).